GIS-based multi-dimensional risk assessment of the grassland fire in northern China

This study presents a methodology for risk analysis and assessment to manage grassland fire in northern China based on the Geographical Information Systems from the viewpoints of climatology, geography, disaster science, and environmental science and so on. Using natural disaster and risk assessment theory, a multi-dimensional grassland fire risk index (MGFRI) was proposed by integrating weighted comprehensive method, analytic hierarchy process, and fuzzy gamma method into natural disaster risk index. The developed MGFRI will be an easily understandable tool to manage grassland fire by comparing the risk of regions in the northern China and relative contributions of various factors, for example, hazard, exposure, vulnerability, and management ability. A scale of one to five was derived to measure the risk degree. It shows that 4.4?% of grassland falls in the category of ??very high?? risk, followed by 9.6, 19.1, 60.9, and 5.9?%, respectively, in the categories ??high??, ??middle??, ??low??, and ??very low??. The assessment results show reliability by test. The results in this study are intended to support local, provincial, and national government agencies to: (1) make resource allocation decisions; (2) make high-level planning decisions; and (3) raise public awareness of grassland fire risk, its causes, and ways to manage it.     

右江裂谷区三叠系岩石物性特征及其与金矿化的关系

本文阐述了右江裂谷区微细粒浸染型金矿床控矿层位三叠系百蓬组泥质粉砂岩及砂质泥岩的粒度，比表面、孔隙度及孔隙类型和渗透率等物性特征，讨论了与其成矿流体的循回、水岩反应及其有效浸取围岩矿物质的关系。在此基础邮成矿流体和矿矿物质主要来自于地层；由于热液躲避低势能方向迁移，造成断理解发的盆地边缘区和水下隆起周围的环状断裂带为金矿床沉淀的场所。并通过形成金矿所需热液量的估算得出，该区金矿床的形成，是由于热流     

世界主要深水含油气盆地烃源岩特征

对墨西哥湾、巴西东部大陆边缘、西非被动大陆边缘、澳大利亚西北陆架、挪威中部陆架、南海等六个地区的22个深水含油气盆地烃源岩特征(主力烃源岩形成的时代、构造背景、沉积环境、类型、地球学化指标等)的综合研究结果表明,世界深水含油气盆地主力烃源岩主要集中在白垩系,其次为第三系和侏罗系;裂谷期烃源岩占绝对优势,其次为被动陆缘期...     

卧龙湖煤矿102工作面顶板采动效应研究

基于卧龙湖煤矿的岩石力学测试资料,运用FLAC3D数值模拟软件,分析了102工作面在回采过程中的应力重分布、覆岩的变形和破坏特征。数值模拟结果表明,随着工作面的向前推进,垂直方向应力和位移成增加的趋势,采空区中间部位岩体位移近于垂直方向。研究结果为工作面布置方法、顶板支护方式的选择和采区设计提供了依据,为顶板事故的预防提供了参考资料。     

Source characteristics of the Yutian earthquake in 2008 from inversion of the co-seismic deformation field mapped by InSAR

On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.     

大别山超高压变质岩的退变质赤微构造：折返过程的启示

大别山超高压变质岩中发现了一系列退变质显微构造,其主要类型有：①由于出溶而产生的定一包裹物;②由于多型转变而产生的假像替代;③固→固反应产生的冠状体;④涉及流体的退变质反应产生的冠状体或后成合晶。借助显微构造关系,可以建立超高压变质岩的退变质演化阶段,从而构筑其ＰＴ演化趋势、识别出碰撞造山和超高压变质峰期之后的两阶段隆升历史;早期为“挤出”作用诱发的近等温减压退变质;晚期则是地壳伸展体制下的退变质     

Application of fluid inclusions in tectonic geology

The release of thermal fluids is expected during tectonic movement. These thermal fluids may be trapped by minerals (newly formed or recrystallized) to form fluid inclusions. The aim of this paper is to discuss the tectonic relations between the North China Platform and the Qinling Geosyncline based mainly on the fluid inclusion data. Some preliminary conclusions have been drawn as follows:

1. Recognized between the platform and the geosyncline are several tectonic belts, each of which has different characteristics with respect to fluid inclusions.
2. Various tectonic belts are bounded by the fault, on both sides of which fluid inclusions found are considerably different.
3. Research on fluid inclusions provides further information on the history of tectonic evolution of the North China Platform and the Qinling Geosyncline.

This work is an initial attempt to the study of tectonic geology in terms of fluid inclusion data.     

A study on A-type granites in Suzhou,China

The Suzhou granite suite is the anorogenic product, which is located on the inactive continental margin of east China. It was emplaced about 141 Ma ago, occurring as a stock with a polygonal outline on the surface, belonging to alkali potash-feldspar granites with K₂O > Na₂O, Reit’s alkali coefficient = 0.694, SiO₂ = 74.95, and Al₂O₃/(K₂O + Na₂O)mol= 1. Besides K and Na, Li and Rb are also rather high. Highlycharged metals such as Zr, Nb, REE, Y, Sn, Th, Ga and Zn are 10, or even 50 times higher than those in the ordinary granites. Halogen elements such as F and Cl are high in abundance with F = 2700 ppm and Cl = 170 ppm on average. The abundances of deep-source elements such as Ti, Al, Ca, Mg and P are relatively low, with A1₂O₃ = 12.65% and Ca + Mg < 1%. High Ga and low Al contents are typomorphically characteristic of A type granites. Biotite in the rocks is, for the most part, annite, usually filling in quartz and feldspar crystals, indicating that the crystallization of magma proceeded under relatively anhydrous condition. More than 40 kinds of accessory minerals have been identified, of which the mantle-derived mineral chrompicotite and moissanite is of great interest. Two different intrusions, the major and supplementary intrusions, can be distinguished in the granite suite. The rock-forming temperature is estimated to be 810°C, pressure 2.5 kbars, pH 8.1,¹⁸O/¹⁶O low(δ¹⁸O_WR = 6.19‰), and_fo₂= 10⁻¹⁶. The abundances of REE are high and Eu depletion is remarkable (δEu = 0.24). A variety of mineral deposits related to the Suzhou granite suite have been recognized.     

鲁西寒武系第三统张夏组附枝菌与附枝菌微生物灰岩特征研究

本文通过大比例尺野外测量及镜下观察,对鲁西寒武系第三统张夏组的附枝菌与附枝菌微生物灰岩特征进行了详细研究。附枝菌是一种树枝状蓝细菌,一般向上生长扩展,形成灌木状附枝菌群落,生长于附枝菌微生物丘内部。而在微生物丘的外部边缘,附枝菌群落呈半闭合的房室状,与肾状菌十分相似。房室状附枝菌群落可能是在微生物丘外部边缘受局部高能微环境（如水流、波浪等）的影响形成的。在其形成后,其保存状态则是由附枝菌的钙化作用及早期成岩作用决定。由于附枝菌构成其微生物岩的生长骨架,且该微生物岩不具备清晰的中型构造,故可称其为附枝菌格架岩,作为对微生物岩分类命名的又一补充。附枝菌格架岩一般生长于台地边缘或台地外部斜坡环境,其生长过程受水动力条件、阳光照射及海水清澈度等影响。