项目后评价在水利工程建设中的应用初探

项目后评价,是项目生命周期的最后一个流程。实施项目后评价,及时总结项目建设的成功经验和失败教训,对于优化以后类似项目的建设程序,提高决策水平、管理水平和投资效果都有着重要的意义。当前国内项目后评价中尚存在一些突出问题:没有将后评价和前评估区分开;后评估系统的独立性不够;后评估的实施部门缺乏必要的调查核实手段,选取的数据资料面窄、量小、时间期限短,缺乏应有的代表性。针对上述问题并结合水利项目自身特点,提出相应的对策和建议。     

Pumping decisions for sustainable development of groundwater resources in areas of grassland degradation: a case study in Lanqi Banner, Inner Mongolia, China

The best planting alternatives for satisfying high water use demands of forage and fodder crops in a region of Inner Mongolia, China, were determined by a multiobjective distributed-parameter groundwater management model. These alternatives took account of different cropping patterns and pumping decisions associated with both temporal and spatial aspects of water allocation. The model was developed for phreatic, homogenous, and isotropic aquifers using the response matrix technique of quadratic programming theory and, in this case, using the alternative direction implicit (ADI) scheme. Model solutions using effective rainfall with a probability of 50%, show that average water table drawdown in the planning period (2006–2017) is 0.22 m and the groundwater fluctuation in each pumping well is very low. In order to evaluate the pumping decisions under an effective rainfall with a probability of 75%, a sensitive analysis was also conducted. Analysis shows that it is useful to apply the results from the proposed model to control the landscape degradation due to overgrazing and overpumping activities.     

鄂尔多斯盆地靖边气田马五_(1+2)气藏储集单元研究

综合地震、地质、测井等信息,考虑沉积、成岩、地貌、生产动态等多因素,在沟槽识别和致密带研究基础上,通过井间干扰、油层压力变化和试井边界响应分析,按照局部、就近原则对靖边气田马五1+2气藏进行了储集单元划分。共划分出111个储集单元,其中独立型69个,复合型42个。这些储集单元的面积多介于10～50km2之间,单个储集单元的井数一般少于6口。在对气藏储层特征综合认识的基础上,确定流动单元划分思路与流程,并认为关键环节包括古沟槽识别、致密带研究、动静结合确定储集单元等3个方面。储集单元一方面受控于被致密岩相包围的有利成岩相带,宏观上与弱—中等充填泥粉晶白云岩相对应性好;另一方面又受各级古沟槽夹持,在两个一级古沟槽之间往往共生多个储集单元,而这些储集单元边界又严格地受二级或三级沟槽切割控制。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

地理信息系统的演进与发展

分析了地理信息系统产生和发展的背景、地理信息系统软件体系结构和开发模式的发展变化,并基于开放的思想提出地理信息系统将向以网络服务和网格服务为主要形式的开放式GIS方向发展,以实现地理信息的共享与空间数据互操作以及信息资源共享与协同解决问题.     

境外桩基工程的施工实践

通过对支援柬埔寨、几内亚桩基工程的施工实践,总结出在境外工程项目的管理中,要制定相应的管理制度与突发事件的应急预案,在施工过程中要注意政局变化,加强卫生疾病的防治,进行必要的物质储备和规避风险等注意事项及解决方法．对地勘单位拓展海外市场提出了建设性意见,具有一定的借鉴意义。     

POPULATION EXPANSION IN CHINA''''S METROPOLISES AND ITS SCALE-CONTROL

Metropolises are centers of politics, economy, culture and information, and also economic growth poles in comparatively large areas. After 1949, China's urban structure have changed greatly, from original "pyramid" shape into "upside -down pyramid" shape, that is, more megalopolises and metropolises, fewer medium-sized and small cities. The most distinguishing feature of urban population growth was the remarkable increase of population in megalopolises and metropolises. The key reason for urban population expansion is to want to obtain the benefits of scale -agglomeration economy of metropolises. The number of urban functions directly determines the quality and quantity of urban population. Metropolises appeal not only agricultural population but also the population of medium-sized and small cities, which put much more population pressure on metropolises. The ideal goals of scale-control of metropolitan population are discussed in terms of economy, society and ecollogy. In order to control the metropoli     

Objective prism survey of qsos in the field centered at 10h40m + 00°00′

QSO objective prism survey was done for the field centered at 10^h40^m + 00°00. For the 348 objects selected, we present in this paper their positions,B _J magnitudes, spectra, and finding charts. Based on the sample containing 163 QSO candidates with higher reliabilities (F 3), the surface density of QSO candidates withB _J 20 is estimated to be about 4.5 per square degree.Work based on UKST plates.     

船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

Slip-weakening constitutive relation and the structure in the vicinity of a shear crack tip

Shear-crack model with a cohesive zone (or breakdown zone) is appropriate for the analysis of a fault surface in which slip distribution is strongly nonuniform. As the slipped portion advances, slip-weakening occurs over the so-called cohesive zone, a distance behind the fault tip. For a prescribed strength vs. displacement constitutive relation, however, the zone structure is difficult to determine by an analytical method except for some simple cases, thus it often requires a certain numerical procedure. This work proposes a numerical procedure to obtain approximated solutions of the problem by combining a series of elastic solutions derived bySmith (1974). The series is linearly combined and the unknown coefficients are determined by a nonlinear least square method. This method can fit a wide range of prescribed strength vs. displacement relations which may be simple algebraic relations or curves obtained by laboratory tests. By examining the residual errors and in comparison with a derived result in which linear stress is assumed within the zone, it could be concluded that the results provide good accuracy. Moreover, because the results are written in formulae, they can be easily referred to or used. By fitting constitutive curves in many different shapes, it is found that the stress distribution within the zone is more sensitive to the constitutive curve shape than the displacement. The most interesting fact is that the zone size is not sensitive to the curve shape, i.e., the zone size can be estimated by $$R = 3\mu \zeta \upsilon _c /\{ 2(1 - \upsilon )(\tau _c - \tau _f )\}$$ with ζ=1±0.11 for most cases.