Frequency–Magnitude Distribution of −3.7 ≤ M W ≤ 1 Mining-Induced Earthquakes Around a Mining Front and b Value Invariance with Post-Blast Time

We investigated frequency-magnitude distribution (FMD) of acoustic emissions (AE) occurring near an active mining front in a South African gold mine, using a catalog developed from an AE network, which is capable of detecting AEs down to M _W  ?5. When records of blasts were removed, FMDs of AEs obeyed a Gutenberg?Richter law with similar b values, not depending on post-blasting time from the initial 1-min interval through more than 30 h. This result denies a suggestion in a previous study (Richardson and Jordan Bull Seismol Soc Am, 92:1766–1782, 2002) that new fractures generated by blasting disturb the size distribution of background events, which they interpreted as slip events on existing weak planes. Our AE catalog showed that the GR law with b ～ 1.2 was valid between M _W  ?3.7 and 0 for AEs around the mining front. Further, using the mine’s seismic catalog, which covers a longer time period of the same area, we could extend the validity range of the GR law with the same b value up to M _W 1.     

LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system

Floor isolation is an alternative to base isolation for protecting a specific group of equipment installed on a single floor or room in a fixed‐base structure. The acceleration of the isolated floor should be mitigated to protect the equipment, and the displacement needs to be suppressed, especially under long‐period motions, to save more space for the floor to place equipment. To design floor isolation systems that reduce acceleration and displacement for both short‐period and long‐period motions, semi‐active control with a newly proposed method using the linear quadratic regulator (LQR) control with frequency‐dependent scheduled gain (LQRSG) is adopted. The LQRSG method is developed to account for the frequency characteristics of the input motion. It updates the control gain calculated by the LQR control based on the relationship between the control gain and dominant frequency of the input motion. The dominant frequency is detected in real time using a window method. To verify the effectiveness of the LQRSG method, a series of shake table tests is performed for a semi‐active floor isolation system with rolling pendulum isolators and a magnetic‐rheological damper. The test results show that the LQRSG method is significantly more effective than the LQR control over a range of short‐period and long‐period motions. Copyright © 2013 John Wiley & Sons, Ltd.     

Increases of wet deposition at remote sites in Japan from 1991 to 2009

Temporal trends in wet deposition of major ions were explored at nationwide remote sites in Japan from April 1991 to March 2009 by using the seasonal Kendall slope estimator and the nonparametric seasonal Kendall test. For the trend analysis, datasets from eight remote sites (Rishiri, Echizenmisaki, Oki, Ogasawara, Shionomisaki, Goto, Yakushima, and Amami) were selected from the Japanese Acid Deposition Survey (JADS) conducted by the Ministry of the Environment. Deposition of H⁺ has been increasing at remote sites in Japan on a national scale. Significant (p????0.05) increases in H⁺ deposition were detected with changes of +3?C+9?%?year^?1 at seven sites, while insignificant increases were observed at one site. Depositions of non-sea salt (nss)-SO ₄ ^2? and NO ₃ ^? significantly increased at four and six sites, respectively, with changes of +1?C+3?%?year^?1. Significant increases in precipitation at four sites would have contributed to the increase in depositions of H⁺, nss-SO ₄ ^2? , and NO ₃ ^? . The emission trends of SO₂ and NO_x did not corresponded to the deposition trends of nss-SO ₄ ^2? and NO ₃ ^? . The different trends indicated that temporal variation of precipitation amount trend dominated the deposition trends.     

A 90,000-year tephrostratigraphic framework of Aso Volcano, Japan

A detailed 90,000-year tephrostratigraphic framework of Aso Volcano, southwestern Japan, has been constructed to understand the post-caldera eruptive history of the volcano. Post-caldera central cones were initiated soon after the last caldera-forming pyroclastic-flow eruption (90 ka), and have produced voluminous tephra and lava flows. The tephrostratigraphic sequence preserved above the caldera-forming stage deposits reaches a total thickness of 100 m near the eastern caldera rim. The sequence is composed mainly of mafic scoria-fall and ash-fall deposits but 36 silicic pumice-fall deposits are very useful key beds for correlation of the stratigraphic sequence. Explosive, silicic pumice-fall deposits that fell far beyond the caldera have occurred at intervals of about 2500 years in the post-caldera activity. Three pumice-fall deposits could be correlated with lava flows or an edifice in the western part of the central cones, although the other silicic tephra beds were erupted at unknown vents, which are probably buried by the younger products from the present central cones. Most of silicic eruptions produced deposits smaller than 0.1 km³, but bulk volumes of two silicic eruptions producing the Nojiri pumice (84 ka) and Kusasenrigahama pumice (Kpfa; 30 ka) were on the order of 1 km³ (VEI 5). The largest pyroclastic eruption occurred at the Kusasenrigahama crater about 30 ka. This catastrophic eruption began with a dacitic lava flow and thereafter produced Kpfa (2.2 km³). Total tephra volume in the past 90,000 years is estimated at about 18.1 km³ (dense rock equivalent: DRE), whereas total volume for edifices of the post-caldera central cones is calculated at about 112 km³, which is six times greater than the former. Therefore, the average magma discharge rate during the post-caldera stage of Aso Volcano is estimated at about 1.5 km³/ky, which is similar to the rates of other Quaternary volcanoes in Japan.     

http://dx.doi.org/10.1016/j.gsf.2016.06.010

Galactic cosmic rays and solar protons ionize the present terrestrial atmosphere,and the air showers are simulated by well-tested Monte-Carlo simulations,such as PHITS code.We use the latest version of PHITS to evaluate the possible ionization of protoplanetary disks by galactic cosmic rays(GCRs),solar protons,and by supernova remnants.The attenuation length of GCR ionization is updated as 118 g cm~(-2),which is approximately 20% larger than the popular value.Hard and soft possible spectra of solar protons give comparable and 20% smaller attenuation lengths compared with those from standard GCR spectra,respectively,while the attenuation length is approximately 10% larger for supernova remnants.Further,all of the attenuation lengths become 10% larger in the compound gas of cosmic abundance,e.g.128 g cm~(-2) for GCRs,which can affect the minimum estimate of the size of dead zones in protoplanetary disks when the incident flux is unusually high.     

Sealevel history recorded in the Pleistocene carbonate sequence in IODP Hole 310‐M0005D,off Tahiti

Material cored during the Integrated Ocean Drilling Program (IODP) Expedition 310 ‘Tahiti Sea Level’ revealed that the fossil reef systems around Tahiti are composed of two major stratigraphic sequences: (i) a last deglacial sequence; and (ii) an older Pleistocene sequence. The older Pleistocene carbonate sequence is composed of reef deposits associated with volcaniclastic sediments and was preserved in Hole 310‐M0005D drilled off Maraa. Within an approximately 70‐m‐thick older Pleistocene sequence (33.22–101.93 m below seafloor; 92.85–161.56 m below present sealevel) in this hole, 11 depositional units are defined by lithological changes, sedimentological features, and paleontological characteristics and are numbered sequentially from the top of the hole downward (Subunits P1–P11). Paleowater depths inferred from nongeniculate coralline algae, combined with those determined by using corals and larger foraminifers, suggest two major sealevel rises during the deposition of the older Pleistocene sequence. Of these, the second sealevel rise is associated with an intervening sealevel drop. It is likely that the second sealevel rise corresponds to that during Termination II (TII, the penultimate deglaciation, from Marine Isotope Stages 6 to 5e). Therefore, the intervening sealevel drop can be correlated with that known as the ‘sealevel reversal’ during TII. Because there are limited data on the Pleistocene reef systems in the tropical South Pacific Ocean, this study provides important information about Pleistocene sealevel history, the evolution of coral reef ecosystems, and the responses of coral reefs to Quaternary climate changes.     

Sound velocity measurement in liquid water up to 25 GPa and 900 K: Implications for densities of water at lower mantle conditions

We extended the pressure range of sound velocity measurements for liquid water to 25 GPa and 900 K along the melting curve using a laser heated diamond anvil cell with a combined system of Brillouin scattering and synchrotron X-ray diffraction. Experimental pressure and temperature were obtained by solving simultaneous equations: the melting curve of ice and the equation of state for gold. The sound velocities obtained in liquid water at high pressures and melting temperatures were converted to density using Murnaghan's equation of state by fitting a parameter of the pressure derivative of bulk modulus at 1 GPa. The results are in good agreement with the values predicted by a previously reported equation of state for water based on sound velocity measurements. The equation of state for water obtained in this study could be applicable to water released by dehydration reactions of dense hydrous magnesium silicate phases in cold subducting slabs at lower mantle conditions, although the validity of Murnaghan's equation of state for water should be evaluated in a wider pressure and temperature ranges. The present velocity data provides the basis for future improvement of the accurate thermodynamic model for water at high pressures.     

1-G model tests and hollow cylindrical torsional shear experiments on seismic residual displacements of fill dams from the viewpoint of seismic performance-based design

This paper concerns technological efforts for the general acceptance of performance-based seismic design principle of geotechnical structures. Among many problems to be solved, a particular emphasis was placed on the prediction of residual displacement that remains after a strong earthquake. Because of the complicated behavior of soils undergoing cyclic loading, the prediction is often either complicated/costly or not very accurate. The aim of this study is to examine the capability of existing prediction measures and propose some future scopes. To achieve these goals, shaking table model tests and laboratory shear tests were conducted by taking fill dams as an example target structure. It is concluded that performance-based design is possible if the necessary time and cost are spent and if the required accuracy of prediction is reasonable.     

Lower and Upper Neoproterozoic magmatic records in Itaiacoca Belt (Paraná-Brazil): Zircon ages and lithostratigraphy studies

The Itaiacoca Belt is a sequence of metavolcanic and metasedimentary rocks that crop out east of Paraná and southeast of São Paulo states, in southern Brazil.This geologic–geochronologic study supports division of the Itaiacoca Belt into two major lithologic sequences. The older is a carbonate platform sequence (dolomitic meta-limestones/metamarls/calc-phyllites/carbonate phyllites) with minimum deposition ages related to the end of the Mesoproterozoic/beginning of the Neoproterozoic (1030–908 Ma:U–Pb, zircon of metabasic rocks). The younger sequence contains mainly clastics deposits (meta-arkoses/metavolcanics/metaconglomerates/metapelites) with deposition ages related to the Neoproterozoic (645–628 Ma:U–Pb,zircon of metavolcanic rocks). These ages are quite close to K–Ar ages (fine fraction) of the 628–610 Ma interval, associated with metamorphism and cooling of the Itaiacoca Belt.The contact between the dolomitic meta-limestones and meta-arkoses is marked by intense stretching and high-angle foliation, suggesting that the discontinuity between these associations resulted from shearing. It is proposed here that the term Itaiacoca Sequence, should represent the dolomitic meta-limestones, and the term Abapã Sequence represents the meta-arkoses/metavolcanics/phyllites. In a major tectonic context, these periods are related to the break-up of Rodinia Supercontinent (1030–908 Ma) and the amalgamation of the Gondwana Supercontinent (645–628 Ma).     

Anatomy of a Cambrian suture in Gondwana: Pacific-type orogeny in southern India?

Southern India occupies a central position in the Late Neoproterozoic–Cambrian Gondwana supercontinent assembly. The Proterozoic mosaic of southern India comprises a collage of crustal blocks dissected by Late Neoproterozoic–Cambrian crust-scale shear/suture zones. Among these, the Palghat–Cauvery Suture Zone (PCSZ) has been identified as the trace of the Cambrian suture representing Mozambique Ocean closure during the final phase of amalgamation of the Gondwana supercontinent. Here we propose a model involving Pacific-type orogeny to explain the Neoproterozoic evolution of southern India and its final amalgamation within the Gondwana assembly. Our model envisages an early rifting stage which gave birth to the Mozambique Ocean, followed by the initiation of southward subduction of the oceanic plate beneath a thick tectosphere-bearing Archean Dharwar Craton. Slices of the ocean floor carrying dunite–pyroxenite–gabbro sequence intruded by mafic dykes representing a probable ophiolite suite and invaded by plagiogranite are exposed at Manamedu along the southern part the PCSZ. Evidence for the southward subduction and subsequent northward extrusion are preserved in the PCSZ where the orogenic core carries high-pressure and ultrahigh-temperature metamorphic assemblages with ages corresponding to the Cambrian collisional orogeny. Typical eclogites facies rocks with garnet + omphacite + quartz and diagnostic ultrahigh-temperature assemblages with sapphirine + quartz, spinel + quartz and high alumina orthopyroxene + sillimanite + quartz indicate extreme metamorphism during the subduction–collision process. Eclogites and UHT granulites in the orogenic core define P–T maxima of 1000 °C and up to 20 kbar. The close association of eclogites with ultramafic rocks having abyssal signatures together with linear belts of iron formation and metachert in several localities within the PCSZ probably represents subduction–accretion setting. Fragments of the mantle wedge were brought up through extrusion tectonics within the orogenic core, which now occur as suprasubduction zone/arc assemblages including chromitites, highly depleted dunites, and pyroxene bearing ultramafic assemblages around Salem. Extensive CO₂ metasomatism of the ultramafic units generated magnesite deposits such as those around Salem. High temperature ocean floor hydrothermal alteration is also indicated by the occurrence of diopsidite dykes with calcite veining. Thermal metamorphism from the top resulted in the dehydration of the passive margin sediments trapped beneath the orogenic core, releasing copious hydrous fluids which moved upward and caused widespread hydration, as commonly preserved in the Barrovian amphibolite facies units in the PCSZ. The crustal flower structure mapped from PCSZ supports the extrusion model, and the large scale north verging thrusts towards the north of the orogenic core may represent a fold-thrust belt. Towards the south of the PCSZ is the Madurai Block where evidence for extensive magmatism occurs, represented by a number of granitic plutons and igneous charnockite massifs of possible tonalite–trondhjemite–granodiorite (TTG) setting, with ages ranging from ca. 750–560 Ma suggesting a long-lived Neoproterozoic magmatic arc within a > 200 km wide belt. All these magmatic units were subsequently metamorphosed, when the Pacific-type orogeny switched over to collision-type in the Cambrian during the final phase of assembly of the Gondwana supercontinent. One of the most notable aspects is the occurrence of arc magmatic rocks together with high P/T rocks, representing the deeply eroded zone of subduction. The juxtaposition of these contrasting rock units may suggest the root of an evolved Andean-type margin, as in many arc environments the roots of the arc comprise ultramafic/mafic cumulates and the felsic rocks represent the core of the arc. The final phase of the orogeny witnessed the closure of an extensive ocean — the Mozambique Ocean — and the collisional assembly of continental fragments within the Gondwana supercontinent amalgam. The tectonic history of southern India represents a progressive sequence from Pacific-type to collision-type orogeny which finally gave rise to a Himalayan-type Cambrian orogen with characteristic magmatic, metasomatic and metamorphic factories operating in subduction–collision setting.