Audio frequency magneto-telluric survey of Norikura Volcano in central Japan

Norikura Volcano has not been active during the last 10,000 years in spite of the activity of the surrounding volcanic mountains. To study past volcanic activities, geological studies were carried out extensively. However, quite a few geophysical investigations were conducted to contribute to volcanology. Our objective is to detect the present subsurface structure of Norikura Volcano and to define volcanic stratifications. In the vicinity of Norikura Volcano, geothermal fields are still active. Subsurface volcanic rocks in this area have been exposed to geothermal activity and altered. To comprehend volcanic stratifications of Norikura and geothermal activity, we conducted audio frequency magneto-telluric (AMT) surveys around Norikura Volcano. AMT survey is useful in clearly defining the resistivity structure related to volcanic regions. The AMT data were acquired over a frequency range 10 Hz–10 kHz. Decomposition analysis was applied to the tensor impedance data. Subsequently, apparent resistivity and phase data were inverted using a two-dimensional magneto-telluric (MT) inversion and a model of Norikura was derived. The final model manifests that the surface resistors are in agreement with andesite lava or dacite lava. As for the deeper structure, a horizontal conductor is situated above resistive basements. The alteration of the conductor was weak, while basement rocks were strongly altered and/or heated through the thermal activity. The existence of these layers seems to indicate the degree of thermal activity of Norikura Volcano.     

Compression of Na0.4Mg0.6Al1.6Si0.4O4 NAL and Ca-ferrite-type phases

Compression behaviors of two Al-rich phases in the lower mantle, hexagonal new aluminum-rich (NAL) phase and its high-pressure polymorph Ca-ferrite-type (CF) phase, were examined for identical Na_0.4Mg_0.6Al_1.6Si_0.4O₄ (40?% NaAlSiO₄–60?% MgAl₂O₄) composition. The volumes of the NAL and CF phases were obtained at room temperature up to 31 and 134?GPa, respectively, by a combination of laser-annealed diamond-anvil cell techniques and synchrotron X-ray diffraction measurements. Fitting of the third-order Birch–Murnaghan equation of state to such pressure–volume data yields bulk modulus K ₀?=?199(6) GPa at 1?bar and its pressure derivative K ₀′?=?5.0(6) for the NAL phase and K ₀?=?169(5) GPa and K ₀′?=?6.3(3) for the CF phase. These results indicate that the bulk modulus increases from 397 to 407 GPa across the phase transition from the NAL to CF phase at 43 GPa, where the NAL phase completely transforms into the CF phase on Na_0.4Mg_0.6Al_1.6Si_0.4O₄. Density also increases by 2.1?% across the phase transition.     

Planform evolution of deltas with graded alluvial topsets: Insights from three‐dimensional tank experiments,geometric considerations and field applications

The profile of a river that conveys sediment without net deposition and net erosion is referred to as ‘graded’ with respect to vertical aggradation of the river segment. Three experimental series, designed in terms of the autostratigraphic view of alluvial grade, were conducted to clarify the diagnostic spatial behaviour of graded alluvial–deltaic rivers: an ‘R series’, which utilized a moving boundary setting with a stationary base level; an ‘F series’ in a fixed boundary setting with a stationary base level to produce ‘forced grade’; and an ‘M series’ in a moving boundary setting with constant base‐level fall to produce ‘autogenic grade.’ The results of the three experimental series, combined with geometrical modelling of the effects of basin water depth and other experimental data, suggest the following: (i) in a graded alluvial–deltaic system, lateral shifting and avulsing of active distributary channels are suppressed regardless of whether the downstream boundary of the deltaic system is fixed; (ii) in a delta with a downstream‐fixed boundary, the graded streams are stabilized within a valley that is incised in the axial part of the delta plain, whereby the alluvial plain outside the valley is abandoned and terraced; (iii) in moving boundary settings, the graded river simply extends basinward as a linearly elongated channel and lobe system without cutting a valley; and (iv) a modern forced‐graded alluvial river is most likely to be found in a valley incised into a fan delta in front of very deep water, and the stratigraphic signal of fossil autogenic‐graded rivers will be found in deltaic successions that accumulated in the outer to marginal areas of deltaic continental shelves during sea‐level falls. This renewed autostratigraphic view of alluvial grade suggests a thorough reconsideration of the conventional understanding that an alluvial river feeding a progradational delta is graded with a stationary base level.     

Rb–Sr and Sm–Nd isotopic studies of mafic igneous rocks from the Ryoke plutono-metamorphic belt in the Setouchi area, Southwest Japan: implications for the genesis and thermal history

Abstract Rb–Sr and Sm–Nd isochron ages were determined for whole rocks and mineral separates of hornblende‐gabbros and related metadiabases and quartz‐diorite from Shodoshima, Awashima and Kajishima islands in the Ryoke plutono‐metamorphic belt of the Setouchi area, Southwest Japan. The Rb–Sr and Sm–Nd whole‐rock‐mineral isochron ages for six samples range from 75 to 110 Ma and 200–220 Ma, respectively. The former ages are comparable with the Rb–Sr whole‐rock isochron ages reported from neighboring Ryoke granitic rocks and are thus due to thermal metamorphism caused by the granitic intrusions. On the contrary, the older ages suggest the time of formation of the gabbroic and related rocks. The initial ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios of the gabbroic rocks (0.7070–0.7078 and 0.51217–0.51231 at 210 Ma, respectively) are comparable with those of neighboring late Cretaceous granites and lower crustal granulite xenoliths from Cenozoic andesites in this region. Because the gabbroic rocks are considered to be fragments of the lower crustal materials interlayered in the granulitic lower crust, their isotopic signature has been inherited from an enriched mantle source or, less likely, acquired through interaction with the lower crustal materials. The Sr and Nd isotopic and petrologic evidence leads to a plausible conclusion that the gabbroic rocks have formed as cumulates from hydrous mafic magmas of light rare earth element‐rich (Sm/Nd < 0.233) and enriched isotopic (?_Sr > 0 and ?_Nd < 0) signature, which possibly generated around 220–200 Ma by partial melting of an upper mantle. We further conclude that they are fragments of refractory material from the lower crust caught up as xenoblocks by granitic magmas, the latter having been generated by partial melting of granulitic lower crustal material around 100 Ma.     

Subaqueous geothermal activity revealed by lacustrine sediments of the acidic Nakadake crater lake, Aso Volcano, Japan

Lacustrine sediments were sampled from the inaccessible acidic (pH = 0.43) Nakadake crater lake of Aso Volcano, Japan by a simple method. The sediments contain an extremely high content (74 wt.%) of sulfur, which exits as elemental sulfur, gypsum and anhydrite. The abundant elemental sulfur is likely formed by the reaction of SO₂ and H₂S gases and by the SO₂ disproportionation reaction in magmatic hydrothermal system below the crater lake. Based on the sulfur content of sediments and measurements of elevation change of the crater bottom, the sulfur accumulation rate at the Nakadake crater lake was calculated as 250 tonne/day, which is comparable with the SO₂ emission rate (200–600 tonne/day) from the Nakadake crater. The sediments include a small amount (9%) of clear glass shards that are apparently not altered in spite of the high reactivity of hyperacid lake water. This finding suggests that the clear glass shards are fragments of recently emitted magmas from fumaroles on the bottom of the crater lake and the magma emissions continuously occur even in quiescent periods.     

A 90,000-year tephrostratigraphic framework of Aso Volcano, Japan

A detailed 90,000-year tephrostratigraphic framework of Aso Volcano, southwestern Japan, has been constructed to understand the post-caldera eruptive history of the volcano. Post-caldera central cones were initiated soon after the last caldera-forming pyroclastic-flow eruption (90 ka), and have produced voluminous tephra and lava flows. The tephrostratigraphic sequence preserved above the caldera-forming stage deposits reaches a total thickness of 100 m near the eastern caldera rim. The sequence is composed mainly of mafic scoria-fall and ash-fall deposits but 36 silicic pumice-fall deposits are very useful key beds for correlation of the stratigraphic sequence. Explosive, silicic pumice-fall deposits that fell far beyond the caldera have occurred at intervals of about 2500 years in the post-caldera activity. Three pumice-fall deposits could be correlated with lava flows or an edifice in the western part of the central cones, although the other silicic tephra beds were erupted at unknown vents, which are probably buried by the younger products from the present central cones. Most of silicic eruptions produced deposits smaller than 0.1 km³, but bulk volumes of two silicic eruptions producing the Nojiri pumice (84 ka) and Kusasenrigahama pumice (Kpfa; 30 ka) were on the order of 1 km³ (VEI 5). The largest pyroclastic eruption occurred at the Kusasenrigahama crater about 30 ka. This catastrophic eruption began with a dacitic lava flow and thereafter produced Kpfa (2.2 km³). Total tephra volume in the past 90,000 years is estimated at about 18.1 km³ (dense rock equivalent: DRE), whereas total volume for edifices of the post-caldera central cones is calculated at about 112 km³, which is six times greater than the former. Therefore, the average magma discharge rate during the post-caldera stage of Aso Volcano is estimated at about 1.5 km³/ky, which is similar to the rates of other Quaternary volcanoes in Japan.     

Surface-to-base amplification evaluated from KiK-net vertical array strong motion records

Site amplification defined as the peak value of spectrum ratio was investigated using surface and base accelerations recorded in a number of KiK-net down-hole arrays in Japan during three major earthquakes. An important task was to determine the spectral amplifications relative to outcropping motions with the aid of the down-hole array records. Based on soil data available for individual arrays, theoretical amplifications were calculated and adjusted to coincide with the peak amplifications of the array records. A good and unique correlation was found between the peak amplifications thus obtained and S-wave velocity ratios, defined by S-wave velocity in base layer divided by average S-wave velocity , for different sites and different earthquakes. The value of was evaluated from fundamental mode frequency and the thickness of an equivalent surface layer in which peak amplification is exerted. The conventional parameter V_s30; averaged shear wave velocity in the top 30 m used in current design codes, did not correlate well with the obtained amplifications. It is suggested that may be determined not only from V_s-logging data but also from microtremor measurements.     

Induction of female‐to‐male sex change in a large protogynous fish,Choerodon schoenleinii

Most behavioral studies on hermaphroditic fishes have focused on small‐sized species, which are tractable for research. Although many species of large hermaphroditic fishes are important fishery resources, their proximate mechanisms (visual, chemical and/or behavioral cues) in the social regulation of sex change have not been determined. Determination of these would inform resource management and aquaculture. In order to get closer to understanding the proximate mechanisms underlying the social regulation of female‐to‐male sex change in large hermaphroditic fishes, this study reports situations that induced female‐to‐male sex change in black‐spot tuskfish, Choerodon schoenleinii, a species of large protogynous fish, in massive laboratory tanks. The situations differed in the possibility of male‐to‐female tactile contact and in the group sex ratio, enabling us to infer plausible proximate mechanisms underlying sex change induction. Tactile contact between individuals is suspected to be closely related to the incidence of female‐to‐male sex change in C. schoenleinii. Visual and chemical cues alone may be insufficient to inhibit such sex changes. Male‐to‐female tactile contact may have an important influence on female‐to‐male sex change, i.e., inhibition of this sex change, in this species. The effect of sex ratio of a social group on the incidence of sex change may be due to the relative frequency and intensity of male tactile contact with each female, which may vary with the number of females. In the absence of a dominant male, tactile contact among females may affect the incidence of sex change, as well as determine which individuals change sex.