Olivine phenocrysts in some Cameroonian Basalts—implications for primary magma composition

Summary The chemical composition of olivine phenocrysts was determined for 13 basaltic samples taken from the central part of the Cameroon Volcanic line to estimate the compositions of the primary olivine phenocrysts and the primary magmas. The Mg/(Mg + Fe) ratios of the olivines attain 0.91, though many of the magnesian olivines are identified on a textural basis as xenocrysts from peridotite inclusions. Most magnesian olivine phenocrysts have Mg/(Mg + Fe) ratios of 0.87–0.88 and NiO contents of 0.32–0.35 wt %. The NiO versus Mg/(Mg + Fe) ratios of the olivines can be used to estimate the compositions of the primary phenocrysts in a range of Mg/(Mg + Fe) = 0.88–0.90. Assuming the Fe(3)/(total Fe) ratios of the magmas are 0.17–0.25, which is estimated from the Fe-Mg partitioning between plagioclase and groundmass, the compositions of the primary magmas were obtained from the Fe²⁺-Mg partition equilibrium with the primary olivine phenocrysts. The primary magmas of the Cameroonian basalts have 13.5 ± 4.0 wt MgO, which is similar to the compositions of basalts with highest MgO contents reported so far from the Cameroon volcanic line.

---

Olivin Kristalle in einigen Basalten aus Kamerun: Hinweise auf die Zusammensetzung des primitiven Magmas

Zusammenfassung Die chemische Zusammensetzung von Olivin Phenokristallen wurde in 13 Basalt-Proben, die vom Zentralteil .des Kamerun-Vulkangürtels stammen, bestimmt, um Hinweise auf die Zusammensetzung der primären Olivineinsprenglinge and des primären Magmas zu erlangen. Die Mg/(Mg + Fe) Verhältnisse der Olivine reichen bis 0.91, obwohl viefle dieser Mg-Olivine auf Grund textureller Kriterien als aus Peridotit-Einschlüssen stammende Xenokristalle zu identifizieren sind. Die Mg/(Mg + Fe) Verhältnsse der Hauptmasse der Olivin-Phenokristalle liegen im Bereich von 0.87 bis 0.88, die Ni0 Gehalte zwischen 0.32 und 0.35 Gew %. Die Ni0 gegen Mg/(Mg + Fe) Verhältnisse eignen sich zur Abschätzung der Zusammensetzung der primären Phenokristalle, solange die Mg/(Mg + Fe) Verhältnisse im Bereich von 0.88 bis 0.90 liegen. Die Zusammensetzung des Primärmagmas wurde mittels der Fe²⁺-Mg-Verteilung zwischen dem Magma und den sich mit dem Magma im Gleichgewicht befindlichen primären Olivinkristallen unter der Annahme eines Fe³⁺/Fe total Verhältnisses von 0.17–0.25, welches sich aus der Mg-Fe Verteilung zwischen Plagioklas und Grundmasse ergibt, bestimmt. Demnach ergibt sich für das primäre Magma der Kamerun Basalte ein MgO Gehalt von 13.5 + 4.0 Gew%. Dieser Wert ist mit der Zusammensetzung von Basalten mit höchsten MgO-Gehalten, wie sie bisher vom Kamerun-Vulkangürtel berichtet worden sind, vergleichbar.

---

---

With 6 Figures     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

Rockfall hazard in the Daisekkei Valley, the northern Japanese Alps, on 11 August 2005

This paper describes a rockfall event in the Daisekkei Valley of Mount Shirouma-dake (2,932 m), the northern Japanese Alps. The rockfall occurred on a steep cliff comprising well-jointed felsites and produced debris of ≥8,000 m³. Most debris was deposited on an elongated snowpatch located immediately beneath the cliff, and it caused casualties among people who were trekking along a trail on the snowpatch. Additionally, a large rock block slipped 1 km on the snowpatch. The rockfall could have been due to the differential retreat of the rockwall, which contains areas of high- and low-density joints. Seasonal and diurnal freeze–thaw activities and snow avalanches and wash appear to be important factors responsible for the retreat. Although some rock blocks that can collapse further remain on the rockwall, the position of the mountain trail in the Daisekkei Valley is fixed. Fundamental reform of tourism systems for climbers, including education on natural hazards, is required.     

Chemical forms of minor metallic elements in the ocean

In order to clarify the chemical forms of minor metallic elements occurring in the ocean, a new method of separation of organic compounds of metals in sea water by using XAD-2 resin was contrived. By applying the new method of determination, it is found that, (1) More than 80 % of V, Fe, Cd and Cu dissolved in sea water are present in organic forms regardless of the depth; (2) A most part of Co and Pb are present in organic forms near the surface, but they change into inorganic forms in the deep layer up to 50 to 60%; (3) Of the total amounts of dissolved Al, Ni, Zn, Ag, Mo, and U, less than 30 % are present in organic forms in sea water anywhere in the ocean; (4) Up to 45% of Se is in organic forms.     

Growth inhibition of a red tide flagellate,Chattonella antiqua by copper

Journal of Oceanography - Copper toxicity inChattonella antiqua (Raphidophyceae) was examined using an artificial seawater medium. The growth rate (Μ) was found to be a unique function of...     

Isobaths of Japan-China joint research program on the kuroshio oceanographic atlas volume 1

Forum

Isobaths of Japan-China joint research program on the kuroshio oceanographic atlas volume 1     

Factors regulating the distribution of elements in marine sediments predicted by a simulation model

The contents of oxyanionic elements (V, Se and Mo) and cationic transition metals (Mn, Fe, Co, Ni, Cu and Zn) in sediments from near-shore to deep-sea environments were measured to clarify factors regulating the distribution of these elements in marine sediments. For cationic transition metals of which contents increase from near-shore to deep-sea environments, the chemical composition of pelagic clays is modeled by a mixture of aluminosilicates having the chemical composition of average shale and Fe–Mn oxides having the chemical composition of associated manganese nodules. The content of V is fairly constant in sediments from near-shore to deep-sea areas. The mixture model of average shale and manganese nodules holds also for V, although most of the V is located in the aluminosilicate lattices. The content of Se in the near-shore sediments is higher and that in the deep-sea sediments is lower than that in average shale. The high content in the near-shore sediments is interpreted as the addition of biogenic materials to aluminosilicates with average shale composition and the low content in deep-sea sediments is explained by oxidative release of Se from aluminosilicates. The content of Mo in sediments increases from near-shore to deep-sea environments. The general distribution of Mo in marine sediments is expressed by the mixture model. An anomalously high content of Mo in a near-shore sediment is attributed to adsorption of molybdate on manganese oxides.     

Sound velocity measurement in liquid water up to 25 GPa and 900 K: Implications for densities of water at lower mantle conditions

We extended the pressure range of sound velocity measurements for liquid water to 25 GPa and 900 K along the melting curve using a laser heated diamond anvil cell with a combined system of Brillouin scattering and synchrotron X-ray diffraction. Experimental pressure and temperature were obtained by solving simultaneous equations: the melting curve of ice and the equation of state for gold. The sound velocities obtained in liquid water at high pressures and melting temperatures were converted to density using Murnaghan's equation of state by fitting a parameter of the pressure derivative of bulk modulus at 1 GPa. The results are in good agreement with the values predicted by a previously reported equation of state for water based on sound velocity measurements. The equation of state for water obtained in this study could be applicable to water released by dehydration reactions of dense hydrous magnesium silicate phases in cold subducting slabs at lower mantle conditions, although the validity of Murnaghan's equation of state for water should be evaluated in a wider pressure and temperature ranges. The present velocity data provides the basis for future improvement of the accurate thermodynamic model for water at high pressures.