雷达定量测量降水在佛子岭流域径流模拟中的应用

以位于合肥雷达西南100 km的佛子岭闭合流域 (1813 km2) 及该流域的6个子流域为研究区域, 用地面雨量计和雷达-雨量计联合校准两种方法进行流域面雨量计算, 将两种方法计算的面雨量分别作为TOPMODEL (TOPography based hydrological MODEL) 降水-径流模型的输入, 对模型输出结果进行比较。个例分析表明:雷达-雨量计联合测量降水的精度是否高于单独用地面雨量计计算的精度, 在一定程度上取决于用于校准的地面雨量计数目和代表性; 即使雨量计计算的整个流域面雨量与雷达-雨量计联合校准后的结果接近, 对应子流域面雨量的结果仍然会存在差别; 不同方法计算的某一子流域面雨量的差别越大, 则TOPMODEL水文模型输出的该子流域径流深的差别也越大。     

塔里木河流域冰川洪水对气候变暖的响应

In past 50 years, the air temperature fluctuation was raising trend in Tarim River Basin. The annual mean temperature has increased by 0.3℃ in the whole Tarim River Basin, and by 0.6℃ in the mountain areas. With global warming, the frequency of unstable and extreme climatic events increased, glaciers retreating accelerated and snow meltwater increased have resulted in the more frequency of snow-ice disasters such as glacier debrisflow and glacier flash flood etc. Since 1980s, in the process of intense climate warming, glaciers melting intensified, ice temperature rose and glaciers flows accelerated, and lead to more glacial lakes and extending water storage capacity and stronger glacial lake outburst floods occurrence. It is proposed that the monitoring and evaluating of the impact of climate change on water resources and floods should be enhanced.     

中国东南陆缘的深部结构与动力学过程

对我国东南陆缘地区的人工地震测深、大地电磁测深、重磁测量、地热测量、地学大断面编制以及天然地震的层析成像等大量深部构造研究结果作综合分析。地热异常、地壳内存在低速层和高导层、强烈地震频繁发生等现象说明,这一地区是现代构造运动的活动区。中国东南陆缘的现今应力场主压应力方向为ＮＷＷ－ＳＥＥ,认为是菲律宾板块对欧亚板块的挤压,以及冲绳海槽的扩张等联合作用的结果。因此,这一地区地壳运动的驱动力是太平洋板块和菲律宾板块向欧亚板块推挤产生的。     

一种利用贝叶斯最小判别准则估计未来地震危险的新方法

提出了一种基于最大似然和贝叶斯最小判别准则的新预测方法,它的长处在于对样本数无特殊要求,所以,对低地震活动地区,此模型也能得到与时间有关的稳定的未来强震危险估计。最后,以华北地区为例,说明了本方法的可行性。     

金刚石钻头制造的新型模具材料及模具成型工艺

针对无压浸渍法制造金刚石钻头存在模具费用高、模具加工周期长等缺点,研究了一种新型模具材料（陶瓷粉）取代石墨材料,并研究了一种全新的模具成型方法,简化了模具制造工序,降低了成本。     

腾冲火山区水平形变初探

介绍了采用精密大地测量的方法,对腾冲火山区域的水平形变情况进行了探索。通过两期相距３８年的实测数据,对火山“休眠期”中岩浆活动与地壳局部变形的相关性进行研究,并提供了部分计算结果。作者认为,采用精密大地测量的方法对火山区域地壳变形进行研究是可行的;火山区域水平形变与构造形变的区别是存在的;腾冲火山区内近几十年内岩浆的动也是明显的,但目前总体为间歇性收缩期;从水平形变测量的结果来看,显示了南面活跃的迹象;且认为可能是岩浆囊的存在才会引起此大范围的地壳活动。     

钻石颜色分级条件浅析

颜色是钻石4C评估中的一个重要指标,也是决定钻石档次和价格的一个重要依据。作者结合实践体会对颜色分级条件进行了分析,并提出了注意要点。     

青海省最高、最低气温不对称性变化的诊断分析

利用青海省１３个站逐月最高、最低气温资料,分析了月、季、年平均最高、最低气温的变化。结果表明最高、最低气温存在明显不对称变化趋势,尤其是３、４月存在明显的反向变化趋势。同时分析了西宁城市效应对最高、最低气温的影响。     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Homogenization‐based analysis of anisotropic damage in brittle materials with unilateral effect and interactions between microcracks

This paper is devoted to micromechanical modeling of induced anisotropic damage in brittle geomaterials. The formulation of the model is based on a proper homogenization procedure by taking into account unilateral effects and interactions between microcracks. The homogenization procedure is developed in the framework of Eshelby's inclusion solution and Ponte‐Castaneda and Willis (J. Mech. Phys. Solids 1995; 43 :1919–1951) estimate. The homogenization technique is combined with the thermodynamics framework at microscopic level for the determination of damage evolution law. A rigorous crack opening–closure transition condition is established and an energy‐release‐rate‐based damage criterion is proposed. Computational aspects on the implementation of micromechanical model are also discussed. The proposed model is evaluated by comparing numerical predictions with experimental data for various laboratory tests on concrete. Parametric studies on unilateral effects and influences of microcracks interactions are finally performed and analyzed. Copyright © 2008 John Wiley & Sons, Ltd.