Numerical simulation of sloshing waves in a 3D tank based on a finite element method

The sloshing waves in a three dimensional (3D) tank are analysed using a finite element method based on the fully non-linear wave potential theory. When the tank is undergoing two dimensional (2D) motion, the calculated results are found to be in very good agreement with other published data. Extensive calculation has been made for the tank in 3D motion. As in 2D motion, in addition to normal standing waves, travelling waves and bores are also observed. It is found that high pressures occur in various circumstances, which could have important implications for many engineering designs.     

一种非平稳噪声背景下的线谱相干检测方法

舰艇目标航行时往往向水中辐射大量线状谱结构的声波信号,线谱信号检测对舰艇目标的被动探测至关重要.实际水下环境噪声常表现为时域非平稳噪声,常规离散傅里叶变换类线谱检测方法时域积分时,不可避免会引入非平稳噪声背景中出现的短时强干扰噪声,使积分结果中线谱信噪比大幅降低,线谱检测性能急剧恶化.为解决上述问题,对分段离散傅里叶变...     

HY-1C/D卫星中国海洋水色水温扫描仪几何定位方法

海洋一号C/D（HY-1C/D）卫星中国海洋水色水温扫描仪（Chinese Ocean Color and Temperature Scanner,COCTS）主要用于探测海洋水色、水温等要素,这些要素需要经过卫星资料处理才能获取,而几何定位是预处理的核心,直接影响这些要素的质量。COCTS具有114°视场角和四元逐点摆扫的特征,据此研究出一套完整的几何定位方法。从0级数据中提取卫星星历,利用插值法从中获取采样时间对应的卫星位置和速度,进而得到轨道（ORB）坐标系到地心旋转（ECR）坐标系的转换矩阵。基于四元逐点摆扫的特征,中心视矢量分别绕X轴、Y轴旋转相应角度,获得扫描行各采样点ORB视矢量,建立视矢量与地球交叉点关系模型,从而对根据波段数据绘制的遥感图像进行地理定位。本文使用插值法替代了传统需要6个轨道根数来计算卫星位置的复杂方法,同时直接计算ORB到ECR的转换矩阵,而不采用传统的两步转换方法。经过多组数据计算及定性定量验证,HY-1C/D COCTS几何定位结果一致;采样像元尺度效应导致从星下点到两侧边缘、从赤道到两极,误差逐渐增大,约在两个像元内。该方法满足一定的定位精度要求,可以用于COCTS的几何定位。     

Distribution and invasion of Spartina alterniflora within the Jiaozhou Bay monitored by remote sensing image

Spartina alterniflora as an alien invasive plant, poses a serious threat to the ecological functions of the coastal wetland of the Jiaozhou Bay. As of 2019, the distribution area of S. alterniflora in the Jiaozhou Bay has reached more than 500 hm². For this reason, combined with field surveys, remote sensing monitoring of the invasion S.alterniflora in the Jiaozhou Bay has been carried out. To accurately identify S. alterniflora within the Jiaozhou Bay coastal wetland, we used a new m...     

Self-Weight Penetration Characteristics of the Suction Foundation with Different Diameters in Sand

During the self-weight penetration process of the suction foundation on the dense sand seabed, due to the shallow penetration depth, the excess seepage seawater from the outside to the inside of the foundation may cause the negative pressure penetration process failure. Increasing the self-weight penetration depth has become an important problem for the safe construction of the suction foundation. The new suction anchor foundation has been proposed, and the self-weight penetration characteristics of the traditional suction foundation and the new suction anchor foundation are studied and compared through laboratory experiments and analysis. For the above two foundation types, by considering five foundation diameters and two bottom shapes, 20 models are tested with the same penetration energy. The effects of different foundation diameters on the penetration depth, the soil plug characteristics, and the surrounding sand layer are studied. The results show that the penetration depth of the new suction foundation is smaller than that of the traditional suction foundation. With the same penetration energy, the penetration depth of the suction foundation becomes shallower as the diameter increases. The smaller the diameter of the suction foundation, the more likely it is to be fully plugged, and the smaller the height of the soil plug will be. In the stage of self-weight penetration, the impact cavity appears around the foundation, which may affect the stability of the suction foundation.

     

Numerical Simulation of Icing on Nrel 5-MW Reference Offshore Wind Turbine Blades Under Different Icing Conditions

Offshore wind energy resources are operational in cold regions, while offshore wind turbines will face the threat of icing. Therefore, it is necessary to study icing of offshore wind turbines under different icing conditions. In this study, icing sensitivity of offshore wind turbine blades are performed using a combination of FLUENT and FENSAP-ICE software, and the effects of liquid water content (LWC), medium volume diameter (MVD), wind speed and air temperature on blade icing shape are analyzed by two types of ice, namely rime ice and glaze ice. The results show that the increase of LWC and MVD will increase the amount of ice that forms on the blade surface for either glaze ice or rime ice, and an increase of MVD will expand the adhesion surface between ice and blade. Before reaching the rated wind speed of 11.4 m/s, it does not directly affect the icing shape. However, after reaching the rated wind speed, the attack angle of the incoming flow decreases obviously, and the amount of ice increases markedly. When the ambient air temperature meets the icing conditions of glaze ice (i.e., −5°C to 0°C), the lower the temperature, the more glaze ice freezes, whereas air temperature has no impact on the icing of rime ice. Compared with onshore wind turbines, offshore wind turbines might face extreme meteorological conditions, and the wind speed has no impact on the amount of ice that forms on the blade surface for most wind speeds

     

Stock assessment for Atlantic yellowfin tuna based on extended surplus production model considering life history

The modern fishery stock assessment could be conducted by various models, such as Stock Synthesis model with high data requirement and complicated model structure, and the basic surplus production model, which fails to incorporate individual growth, maturity, and fishery selectivity, etc. In this study, the Just Another Bayesian Biomass Assessment (JABBA) Select which is relatively balanced between complex and simple models, was used to conduct stock assessment for yellowfin tuna (Thunnus albacares) in the Atlantic Ocean. Its population dynamics was evaluated, considering the influence of selectivity patterns and different catch per unit effort (CPUE) indices on the stock assessment results. The model with three joint longline standardized CPUE indices and logistic selectivity pattern performed well, without significant retrospective pattern. The results indicated that the stock is not overfished and not subject to overfishing in 2018. Sensitivity analyses indicated that stock assessment results are robust to natural mortality but sensitive to steepness of the stock-recruitment relationship and fishing selectivity. High steepness was revealed to be more appropriate for this stock, while the fishing selectivity has greater influence to the assessment results than life history parameters. Overall, JABBA-Select is suitable for the stock assessment of Atlantic yellowfin tuna with different selectivity patterns, and the assumptions of natural mortality and selectivity pattern should be improved to reduce uncertainties.     

大气校正模型对多光谱水深反演影响的多维度分析

大气校正是水体定量遥感的基础与前提。本文从大气校正模型、大气校正模型参数、水体组分差异以及水深反演波段组合方式4个维度探讨大气校正模型对水深反演的影响。研究采用6S、FLAASH、ACOLITE与QUAC 4种大气校正模型,选取大陆型、海洋型与城市型气溶胶模式,以瓦胡岛西北侧与谢米亚岛周边浅水作为清洁水体研究区,以辽东浅滩与槟城海峡作为浑浊水体研究区,基于Landsat-8多光谱影像开展大气校正,并采用8种波段组合方式进行水深遥感反演。研究结果表明：（1）4种大气校正模型均可在一定程度上削弱大气对水体信号的影响;因参数选取以及研究区水体组分的不同,不同模型的校正结果存在一定差异;两类水体反射率峰值分别出现在蓝波段与绿波段;（2）6S大气校正模型鲁棒性较强,该模型因研究区水体组分发生变化导致对应的水深反演结果与其余模型相比波动较小;FLAASH模型在海洋型和城市型两种气溶胶模式水深反演结果在浑浊水体存在较为明显的差异,辽东浅滩浅水区平均相对误差相差7.9%;ACOLITE模型受水体类型影响显著且对浑浊水体具有优越性与稳定性,平均相对误差较FLAASH降低5.6%;（3）多波段水深反演精度普遍优于单波段,但反演精度与波段数目之间无显著的相关性;水深反演波段组合方式对不同研究区敏感性不同,清洁水体三波段模型的反演精度较好,浑浊水体中四波段模型的反演精度最优,平均相对误差较三波段模型降低达5.6%。     

基于遥感数据和表层声速的全海深声速剖面反演

海洋声速剖面严重影响着水下声传播特性,近实时地获取声速剖面对水下声通信、水下定位、鱼群探测等都有重要意义。单经验正交函数回归（single Empirical Orthogonal Function regression,sEOF-r）方法通过建立声速剖面的经验正交系数与海面遥感数据之间的线性回归关系来反演声速剖面。但是,海洋是一个复杂的动力系统,声速与海面遥感数据并不是简单的线性关系,因此,本文基于Argo历史网格数据,通过自组织映射（Self-Organizing Map,SOM）生成海平面高度异常（Sea Level Anomaly,SLA）、海表面温度（Sea Surface Temperature,SST）等海表遥感数据以及表层声速仪测量的表层声速与声速剖面异常之间的非线性映射;然后利用近实时的海表遥感数据和表层声速反演三维海洋声速场。声速剖面反演的结果表明,在多源信息融合的优势下,本文方法的反演性能最稳定且精度最高,声速剖面的平均反演精度比经典sEOF-r方法提高约2 m/s,比未考虑表层声速的经典SOM方法提高约1 m/s。     

Higher-harmonic focused-wave forces on a vertical cylinder

This paper considers higher-harmonic forces due to wave focusing on a vertical circular cylinder. A series of experiments has been conducted in a wave flume. The first six-harmonic components of the measured wave forces are analyzed using the scale-averaged wavelet spectrum. It is noted that due to the transient nature of focused (freak) waves, Fourier analysis would not provide equivalent information to that gleaned from the analyses used herein. The results for the experiments with very steep wave crests show significant amplitudes at the fourth and fifth harmonics. These harmonics exhibit amplitudes that are the same order as the second harmonic, but much larger than those of the third harmonic. The wavelet-based bicoherence is used to detect the quadratic nonlinearity of the measured forces. And the bicoherence spectra reveal the primary mathematical reason for the existence of the striking amplitudes of the fourth and fifth harmonics: the interaction between the lower-harmonic components couple more strongly with the fourth and fifth harmonics, thus the fourth and fifth harmonics glean more energy than those of the third-harmonic components. However, the physical explanation for this remains elusive.