Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

高精度GPS形变监测网数据处理的理论与方法

分析了高精度GPS形变监测网数据处理中系统误差的影响,给出了顾及系统误差影响的自由网平差模型;针对粗差在GPS观测数据中存在的广泛性,在对平差模型进行整体性检验的基础上,采用检验方法消除粗差对平差结果的影响;结合抗差估计,对中国地壳运动观测网络工程1999～2003年观测数据进行了处理,验证了模型的精度和可靠性.     

焦作-郑州天然气输气管道工程地质灾害防治措施及防治建议

焦作-郑州天然气输气管道是较重要建设项目,输气管道起自焦作市博爱县磨头镇,南止郑州市惠济区古荥镇,该输气管道沿线地质环境条件复杂程度为简单-中等。地质灾害类型主要为崩塌、地裂缝、地面不均匀沉陷,黄土湿陷和沙土液化等地质灾害。工程建设有引发和加剧崩塌灾害的可能性,有遭受地质灾害的危险性。工程建设过程中应针对不同的灾害类型采取适当的预防或治理措施。     

第二次土地调查若干问题探讨

第二次土地调查的目的是全面查清全国土地利用状况,掌握真实的土地基础数据,如何保证调查的质量?文章以江阴市为例进行探讨。     

江西省安福地区地热水化学特征研究

为研究江西安福地区水文地球化学特征及控制因素, 本文采集了15组样品, 采用水化学、同位素分析等方法进行研究。结果表明: 研究区地热水以Na-HCO3型水为主, 地下水以HCO3-Na·Ca型为主, 地表水由西南向东北从HCO3-Na·Ca向HCO3-Ca型水演化。水化学组分演化过程主要受岩石风化作用控制, 地层封闭性较差, 水中的Na+、HCO– 3、Sr2+来源于硅酸岩风化溶解。由稳定同位素特征可知, 研究区地热水补给来源为大气降水。研究区热储温度为49.8~101.4 ℃, 地热水循环深度为1 502.6~1 513.6 m。热水在沿断裂带上升过程中与浅层冷水发生混合, 其混合比例为76.1%~87.5%。研究成果为安福地区水循环演化提供依据, 有利于地热资源的合理开采与保护。     

钾霞石制备体系碱性滤液的利用技术

为处理钾长石水热制备钾霞石所产生的碱性滤液,本文采用水热法,考察了氢氧化铝溶解时间、晶化时间、晶化温度、水碱比对钾霞石产率和白度的影响,并对合成钾霞石物相进行了表征。结果表明,合成钾霞石的最佳条件为,氢氧化铝溶解时间为1.5 h,晶化时间为4 h,晶化温度280℃,水碱比为1.8。XRD结果表明,产物为钾霞石粉体。傅里叶变换红外光谱表明,Al(OH)₃中的Al在水热条件下进入到Si—O骨架中形成了Si—O—Al官能团,从而印证了钾霞石的合成。差热分析结果表明,合成钾霞石具有良好的热稳定性。氮气吸附结果表明,合成钾霞石比表面积为5.18 m²/g,平均孔径为32.98 nm。实现了钾长石水热制备钾霞石所剩碱性滤液的资源化利用,并为钾长石水热制备钾霞石提供了一种母液循环的思路,使水热制备钾霞石工业化成为一种可能。     

基于数据挖掘探析张奇文治疗癫痫的用药规

目的：基于数据挖掘技术探析全国名中医张奇文治疗癫痫的用药规律。方法：收集1998年9月1日至2019年9月30日张奇文治疗癫痫的医案,对医案中的数据进行规范化处理,构建数据库,应用古今医案云平台V2.3.5对中药使用频次、四气五味、功效归经、关联、聚类等进行分析,并总结临床经验。结果：共筛选出40首处方,中药120味。排前10位的中药分别为全蝎、蜈蚣、僵蚕、炙甘草、麦芽、山楂、钩藤、羚羊角、珍珠、牛黄,药性以平、温为主,药味主要为甘、辛、苦,主要归肝、肺、脾经,功效以通络止痛、攻毒散结、息风镇痉等为主。关联组合支持度高的组合为全蝎-蜈蚣、全蝎-僵蚕、僵蚕-蜈蚣、钩藤-全蝎、钩藤-蜈蚣。结论：张奇文治疗癫痫标本兼顾,治标重视息风,治本重视健脾。     

三黄通泻合剂治疗脂源性胰腺炎30例临床观察

目的：观察三黄通泻合剂灌肠治疗脂源性胰腺炎（HLP）的临床疗效。方法：将60例HLP患者随机分为治疗组和对照组,每组各30例。对照组予以西医常规治疗,治疗组在对照组的基础上加用三黄通泻合剂灌肠治疗。比较2组腹痛缓解时间、首次排便时间,治疗前后的C反应蛋白（CRP）、三酰甘油（TG）水平及平均住院时间。结果：治疗组腹痛缓解时间、首次排便时间、平均住院时间均较对照组短（P<0.05）,且2组CRP、TG水平治疗前后组内比较及治疗后组间比较,差异均有统计学意义（P<0.05）。结论：三黄通泻合剂可以快速缓解患者腹痛及便秘等症状,显著抑制炎症反应,快速降低TG水平,缩短住院时间,总体疗效显著,值得临床推广。     

On matching the spectrum of Io: Variations in the photometric properties of sulfur-containing mixtures

The problem of comparing laboratory spectra of sulfur-containing binary mixtures with the spectrum of Io is discussed. For the satellite, the observable is the geometric albedo as a function of wavelength, whereas in the laboratory one often measures some other type of albedo. In a previous paper we demonstrated that for pure sulfur the multiplicative factor which converts the laboratory albedos to geometric albedos can be strongly wavelength dependent. The present paper demonstrates that this is also true for binary sulfur-containing mixtures. Furthermore, there is no universal conversion factor applicable to all binary mixtures, nor can the factor be interpolated for a particular mixture from the conversion factors of the two end members. The conversion factor is a function not only of the specific composition of a binary mixture, but of the relative particle size distributions of the two components, and must be measured specifically for each individual sample if a quantitative comparison between a laboratory sample and Io's surface is desired.