基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

玄武岩柱状节理成因性状研究及其对岩体质量的影响

峨眉山玄武岩中普遍发育柱状节理,表现为岩体破碎不完整,其明显受各种原生构造、表生改造、构造的影响.文章结合拟建的西南某水电工程对玄武岩柱状成因分析及性状研究,进一步研究其对岩体质量的影响.     

遥感技术在地质找矿中的应用及发展前景

遥感技术作为矿产勘查的一种手段应用于找矿,并取得了一定成就.遥感技术的直接应用是蚀变遥感信息的提取,遥感技术的间接应用包括地质构造信息、植被的光谱特征及矿床改造信息等方面.遥感找矿具有很大的发展前景的领域主要有:高光谱数据、数据融合技术、3S的紧密结合、计算机技术的发展.     

The distribution and geological significance of carbazole compounds in Silurian paleo-pools of the Tarim Basin,Northwest China

The results presented in this paper indicated that the carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has high concentrations and a complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in the study of hydrocarbon migration of the paleo-pools. The difference in the contents of nitrogen compounds in the Silurian dry asphalts from the Awati, Tabei and Tazhong areas is attributed to the difference in the extent of oxidation and （or） bio-degradation for the areas; the Awati and Tabei areas underwent relatively strong oxidation and bio-degradation. During the first stage of hydrocarbon pool formation in the Silurian system in the Tazhong and Tabei areas of the Tarim Basin （at the end of the Silurian period） and at the second stage in the Awati area （in Permian）, the hydrocarbons experienced a long-distance migration.     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.     

Petroleum Migration Direction of the Silurian Paleo-pools in the Tarim Basin, Northwest China

The results obtained in this paper indicate that carbazole-type compounds have high thermal stability and also show stability in oxidation and bio-degradation. This kind of compounds still has a high concentration and complete distribution in the analyzed dry asphalt samples, showing that they are particularly useful in studying petroleum migration of paleo-pool. During the basin＇s first-stage of oil-gas pool formation in the Silurian in Tazhong and Tabei areas of Tarim Basin （at the end of Silurian period） and the second-stage in the Awati area （in Permian）, the petroleum experienced a long-distance migration. During the formation of the Silurian paleo-pools in Tazhong Uplift at the end of Silurian, the petroleum mainly came from the lower and middle Cambrian source rocks in the Manjiaer sag. The petroleum migrated towards the southwest-south entering the Silurian reservoir beds in Tazhong first. Then, it further migrated within Silurian from northwest to southeast along the highs of the Structural Belts to the region of the Silurian pinchout boundary in Tazhong. In Tabei Uplift, during the first-stage of pool formation, the petroleum was also from the lower and middle Cambrian source rocks in the Manjiaer sag. It migrated northwest entering the Silurian reservoir beds in the Tabei Uplift firstly, and then the migration continued in the same direction within the Silurian reservoirs and finally the petroleum was trapped in higher positions. During the second-stage pool formation in the Silurian beds in the areas around Awati sag, the petroleum mainly came from the lower-middle Cambrian source rocks in the Awati sag. The petroleum migrated from the generation center to Silurian reservoirs in all directions around the sag through major paths, and the petroleum was finally trapped in higher locations.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.     

浙江五亩山地区钨矿容矿构造及找矿方向

五亩山地区燕山期花岗岩侵入活动后,形成了高温热液裂隙石英脉型黑钨矿(白钨矿)矿床.矿化脉体多分布在区域断裂的裂隙构造中,矿化体在地表以中(或低)角度产出,向下以高角度产出,或者两者交替产出形成类似于倾斜的"阶梯"状.通过对含矿裂隙的测量和统计,确定了成矿前或成矿期的裂隙,NE向裂隙为钨矿的容矿构造,并提出了找矿方向.