相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

遥感技术在地质找矿中的应用及发展前景

遥感技术作为矿产勘查的一种手段应用于找矿,并取得了一定成就.遥感技术的直接应用是蚀变遥感信息的提取,遥感技术的间接应用包括地质构造信息、植被的光谱特征及矿床改造信息等方面.遥感找矿具有很大的发展前景的领域主要有:高光谱数据、数据融合技术、3S的紧密结合、计算机技术的发展.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.     

From 2D TO 3D Through Modelling Based On A Single Image

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.     

祁阳山字型构造质疑

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。     

中国金矿床(Ⅰ):成矿理论研究新进展

针对中国近年来金矿床学领域研究工作,综合讨论了金矿床成矿学理论研究方面的主要进展。它们集中体现在①大型一超大型金矿床;②区域成矿学与成矿系统;③造山带成矿与造山型金矿：从俯冲（增生）造山到碰撞造山成矿的显著发展;④成矿系列、成矿谱系到成矿体系研究;⑤热点、地幔柱及其多级演化：从边缘成矿到板内成矿;⑥成矿时代：从模糊到精确;⑦现代金矿成矿的实时模型;⑧从板块构造演化、超越板块构造到成矿地球动力学等8个方面。