大庆长垣外围特低渗透扶杨油层CO_2非混相驱油试验研究

大庆长垣外围有3×108t特低渗透的扶杨油层储量在注水开发条件下难以有效动用,为提高这部分储量的有效动用率,开展了CO2非混相驱油试验研究。PVT测试结果表明,扶杨油层原油较稠,体积系数小,膨胀性和收缩性小,溶解系数较低;CO2驱油细管实验最小混相压力为29 MPa,比原始地层压力高8.6 MPa,现场试验为非混相驱;长岩心实验CO2驱油采收率比注水高4~6个百分点。综合室内可行性评价实验结果看,大庆长垣外围扶杨油层开展CO2驱油试验是可行的,并于2003年初在宋芳屯油田南部开辟了注气试验区,有注气井1口,采出井5口。矿场试验结果表明,CO2驱油能够使特低渗透、裂缝不发育的扶杨油层建立起有效驱动体系,从根本上改善其开发效果,该技术有望成为特低渗透扶杨油层有效动用的可行技术。     

吉林省中部农业土壤中HCH和HCB的残留特征

通过分析测试吉林省中部农业土壤中α-HCH、β-HCH、γ-HCH、δ-HCH 4种异构体和HCB的含量,对该地区HCH和HCB的残留情况进行了讨论。结果表明,在吉林省中部农业土壤中HCH4种异构体均有不同程度的检出,其中β-HCH和γ-HCH为主要的残留物。ΣHCH残留量介于0.42~44.96 ng/g之间,平均值为5.09 ng/g;ΣHCH残留量在不同类型土壤和不同利用方式下土壤中差异不明显。农业土壤中α-HCH/γ-HCH比值均接近于1,指示该地区土壤环境已经发生变化,也可能有新的污染源存在。土壤中HCB平均值为5.51 ng/g,总体残留水平比较低,且在水田中的残留量高于在旱田中的残留量。     

胶东半岛大磨曲家金矿床成矿流体物理化学条件演化

胶东大磨曲家金矿床流体包裹体包括水溶液包裹体、富CO2包裹体和高盐卤水包裹体3种类型,前两者发育较多,高盐卤水包裹体发育极少。流体包裹体显微测温及盐度、密度、压力估算显示,水溶液包裹体均一温度为98~376℃,据冰点温度估算,盐度为0.53%~8.28%,水溶液包裹体均一压力低于50×105Pa;富CO2包裹体完全均一温度为255~348℃,盐度为2.42%~11.43%,均一压力为1 000×105~2 500×105Pa;富CO2包裹体中CO2均一温度为23.0~32.4℃,指示该类包裹体可能含有数量不等的CH4或H2S。静水压力体制下,根据纯CO2包裹体均一压力估算成矿深度约为1 km。在270℃左右,均一压力从富CO2包裹体到水溶液包裹体急剧降低,指示成矿流体在270℃左右可能发生过一次减压沸腾过程,成矿流体盐度和密度在270℃左右也有显著的变化。因此,沸腾作用及其引起的成矿流体物理化学条件的急剧变化可能是导致大磨曲家金矿床成矿物质沉淀的重要机制。     

复杂山地速度建场新方法在秋参1井区的应用

速度建场的精度是制约复杂构造区成图精度的关键因素.针对山地构造复杂、地震资料品质差、叠加速度谱可信度低等问题提出了相应的解决办法.其中,层速度曲线绘制技术、曲线轨迹计算层速度技术、盐层速度建场技术等具有一定的创新性,在实际应用中取得了很好的效果,在复杂山地的变速成图中可以进一步推广使用.     

塔河地区志留纪层序地层划分及沉积相分析

塔河地区志留系缺失中、上统,只保留了下统柯坪塔格组及塔塔埃尔塔格组,发育滨海-浅海碎屑岩沉积,包括潮坪、陆棚等沉积亚相和中潮坪（混合坪）、低潮坪（砂坪）、陆棚泥等3个微相.该地区志留系分为3个三级层序,其中柯坪塔格组包括了SQ1、SQ2,塔塔埃尔塔格组为SQ3.构造运动和海平面升降是塔河地区志留系三级层序及其内部体系域形成的主要控制因素.     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

应用电性特征研究银川平原地下水水质空间分布规律

以蕴涵丰富地下水系统水循环信息的电性特征为线索,采用电测深法,在分析研究银川平原450 m深度内地下水系统的空间结构的基础上,对平原地下水水质空间分布规律进行了综合研究,为银川平原地下水资源可持续利用战略的制订提供了依据。     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

Benthic nutrient fluxes in the intertidal flat within the Changjiang （Yangtze River） Estuary

In an annual cycle from March 2005 to February 2006, benthic nutrient fluxes were measured monthly in the Dongtan intertidal flat within the Changjiang （Yangtze River） Estuary. Except for NH4^＋, there always showed high fluxes from overlying water into sediment for other four nutrients. Sediments in the high and middle marshes, covered with halophyte and consisting of macrofauna, demonstrated more capabilities of assimilating nutrients from overlying water than the low marsh. Sampling seasons and nutrient concentrations in the overlying water could both exert significant effects on these fluxes. Additionally, according to the model provided by previous study, denitrification rates, that utilizing NO3- transported from overlying water （Dw） in Dongtan sediments, were estimated to be from -16 to 193 μmol·h^-1·m^-2 with an average value of 63 μmol·h^-1·m^-2 （n=18）. These estimated values are still underestimates of the in-situ rates owing to the lack of consideration of DN, i.e., denitrification supported by the local NO3^- production via nitrification.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.