云南个旧多金属矿石门坎—保和地区Sn、Sb元素的成矿信息识别与提取

石门坎—保和地区位于云南个旧多金属成矿区西南部,成矿背景复杂,成矿作用具有多期性和多样性。利用研究区1∶1万土壤化探数据,采用泛克里格法和因子分析相结合的方法,提取不同层次的成矿异常信息。结果表明:主因子F_3包含Mo-Au-Sb等元素,反映成矿过程中的岩体和热液相关信息;主因子F_4包含Sn-Bi-W元素,指示中低温热液矿化环境; Sb沿杨家田断裂呈串珠状分布,反映了由北东向构造控制的空间变化特征,与已知矿点对应良好; Sn元素异常在研究区北部呈双峰状环形分布,推测受隐伏岩体或者断层控制。根据元素组合异常F_3和F_4的分布规律,结合地质资料圈定出2个找矿靶区,为进一步找矿工作提供了方向。     

风廓线雷达产品与ERA5再分析资料的对比分析

利用2019-2020年广西三部风廓线雷达的实时风产品与ERA5再分析资料进行分析对比,检验风廓线雷达数据质量.结果 表明,三种风廓线雷达产品(ROBS、HOBS、OOBS)数值差距小,OOBS产品稍显优势,在1h内风廓线雷达探测的水平风波动不大.风廓线雷达数据整体小于ERA5再分析资料.三个站中,北海站的误差最小.北海站误差在2-6km,柳州站在4-6km,南宁站风向误差最小在1-4km,风速在4～6km.三个站的数据在0.5km以下误差都很大,柳州站和南宁站在9km以上误差也很大.分别选取北海站105°、6.5m·s-1,南宁站100°、7m·s-1,柳州站85°、8m·s-1作为极端误差阈值,剔除极端误差后三个站的MAE都小于25°和3m·s-1,并且数据有效率都能达到70％以上.     

顾及邻近点变形因素的高斯过程建模及预测

针对传统的变形监测建模方法一般针对单一监测点的变形预测模型,未考虑到监测点间相互作用的变形特点,该文分析了变形监测点间的相互关联性,通过相关系数法对监测点进行分类,并将邻近监测点的观测序列值作为和时间因素等同的影响因子应用到建模过程中,利用高斯过程算法进行训练,建立预测模型。为提高高斯过程算法的模型预测精度,应选择适合工程案例最优协方差函数。通过实例分析,比较GM(1,1)、多点灰色预测模型和顾及邻近点变形因素的高斯过程等3种模型在基坑围岩、滑坡等变形监测数据处理中的预测精度,表明该文算法考虑到监测点间的变形关联性,充分利用高斯过程在针对小样本、非线性数据建模时的高自适应性等优点,具有较高的预测精度。     

A new evil waveforms evaluating method for new BDS navigation signals

With the advent of new global navigation satellite systems (GNSSs) and new signals, GNSS users will rely more on them to obtain higher-accuracy positioning. Evil waveform monitoring and assessment are of great importance for GNSS to achieve its positioning, velocity, and timing service with high accuracy. However, the advent of new navigation signals introduces the necessity to extend the traditional analyzing techniques already accepted for binary phase-shift keying modulation to new techniques. First, the well-known second-order step thread model adopted by the International Civil Aviation Organization is introduced. Then the extended new general thread models are developed for the new binary offset carrier modulated signals. However, no research has been done on navigation signal waveform symmetry yet. Simulation results showed that, waveform asymmetry may also cause tracking errors, range biases, and position errors in GNSS receivers. It is thus imperative that the asymmetry be quantified to enable the design of appropriate error budgets and mitigation strategies for various application fields. A novel evil waveform analysis method, called waveform rising and falling edge symmetry (WRaFES) method, is proposed. Based on this WRaFES method, the correlation metrics are provided to detect asymmetric correlation peaks distorted by received signal asymmetry. Then the statistical properties of the proposed methods are analyzed, and a proper deformation detection threshold is calculated. Finally, both simulation results and experimentally measured results of Beidou navigation satellite system (BDS) M1-S B1Cd signal are given, which show the effectiveness and robustness of the proposed thread models.     

A comparative analysis of the NDVIg and NDVI3g in monitoring vegetation phenology changes in the Northern Hemisphere

Phenology is a sensitive and critical feature of vegetation and is a good indicator for climate change studies. The global inventory modelling and mapping studies (GIMMS) normalized difference vegetation index (NDVI) has been the most widely used data source for monitoring of the vegetation dynamics over large geographical areas in the past two decades. With the release of the third version of the NDVI (GIMMS NDVI3g) recently, it is important to compare the NDVI3g data with those of the previous version (NDVIg) to link existing studies with future applications of the NDVI3g in monitoring vegetation phenology. In this study, the three most popular satellite start of vegetation growing season (SOS) extraction methods were used, and the differences between SOSg and SOS3g arising from the methods were explored. The amplitude and the peak values of the NDVI3g are higher than those of the NDVIg curve, which indicated that the SOS derived from the NDVIg (SOSg) was significantly later than that derived from the NDVI3g (SOS3g) based on all the methods, for the whole northern hemisphere. In addition, SOSg and SOS3g both showed an advancing trend during 1982–2006, but that trend was more significant with SOSg than with SOS3g in the results from all three methods. In summary, the difference between SOSg and SOS3g (in the multi-year mean SOS, SOS change slope and the turning point in the time series) varied among the methods and was partly related to latitude. For the multi-year mean SOS, the difference increased with latitude intervals in the low latitudes (0–30°N) and decreased in the mid- and high-latitude intervals. The GIMMS NDVI3g data-sets seemed more sensitive than the GIMMS NDVIg in detecting information about the ground, and the SOS3g data were better correlated both with the in situ observations and the SOS derived from the Moderate Resolution Imaging Spectroradiometer NDVI. For the northern hemisphere, previous satellite measures (SOS derived from GIMMS NDVIg) may have overestimated the advancing trend of the SOS by an average of 0.032 d yr^–1.     

基于GIS的医疗资源可达性分析——以吉林省白城市为例

空间可达性是评价医疗资源分布合理性的重要指标之一,借助GIS强大的空间分析功能,可以对医疗资源可达性进行科学的分析与评价。本文尝试基于白城市的行政区划、交通数据以及医疗资源相关资料,使用GIS技术、空间可达性指标和改进的潜能模型对医疗资源可达性进行综合分析,为医疗资源的规划及分配提供决策参考。     

Public cognition and response to earthquake disaster: from the 2008 Mw7.9 Wenchuan to the 2013 Mw6.6 Lushan earthquakes in Sichuan Province,China

Natural Hazards - China is one of the countries most affected by earthquakes. Improving public cognition and response to earthquake disaster (EDCR) is an effective means to reduce seismic risk and...     

冻土机械切削破碎机理的研究进展

冻土开挖困难、破碎效率低是高寒地区工程建设、地基施工等面临的技术难题。冻土机械切削破碎是冻土开挖的主要方法,其机理研究是提高冻土破碎效率的前提和基础。首先总结了温度、含水率、围压等对冻土复杂力学特性的影响,进而调研分析了冻土机械切削破碎的典型切削力学模型,发现冻土切削机械破碎模式不仅与冻土力学特性密切相关,也与切削参数和刀具结构直接相关,冻土切削过程中存在着最优的切削前角（30°~60°）,且深切削和浅切削时冻土内部受力方式存在差异也会导致破坏形式的不同;温度、含水率、围压所造成的冻土力学性能变化会直接导致冻土破坏过程和切削破碎机理的改变,冻土强度随着温度降低表现出先升高然后保持稳定的特性,随着含水率升高呈现出先升高后降低的趋势,冻土破碎存在脆性、塑脆过渡及塑性等不同破坏形式。通过系统总结冻土切削破碎机理研究进展,进一步明确了冻土力学性质主要影响因素、变化特点及其切削破坏损伤特征,为冻土机械切削破碎的切削参数和切削具结构优化提供了设计依据。     

戈壁荒漠覆盖区地质调查中综合地球物理方法与实践

戈壁荒漠覆盖区地质填图是新时期地质调查工作的重点内容之一.覆盖区地质填图的基本目标包括两个方面,一是揭示覆盖层下伏基岩面地质结构,即填绘基岩面地质图;二是揭示覆盖层地质结构,包括地表覆盖层地质结构和覆盖层的三维地质结构.综合利用地球物理方法可以获得覆盖区地下地质结构、岩石属性、沉积物分布与层状结构等信息.而经济有效地选择和组合实施地球物理方法是完成覆盖区地质填图目标任务的重要保障.基于近年在新疆东天山地区开展的覆盖区地质填图工作,提出了针对多覆盖层结构背景下地质填图的综合地球物理方法组合的技术策略.综合地球物理方法以及新技术在巴里坤盆地和哈密盆地的应用展示了其效果,并为在戈壁荒漠覆盖区地质调查过程中如何开展地球物理工作提供了示范和借鉴.      

长江中游沿岸地下水中有机质分子组成特征及其对碘富集的指示

长期摄入高碘地下水（碘浓度＞100 μg/L）会造成人体甲状腺机能损伤.天然有机质被认为是影响高碘地下水形成的关键组分,为研究地下水中溶解性有机质（DOM）分子组成对碘富集的影响,选取长江中游沿岸浅层地下水作为研究对象,运用傅立叶变换离子回旋共振质谱仪（FT-ICR-MS）表征不同碘浓度地下水中DOM分子组成差异.研究发现碘易富集在还原环境的浅层地下水中,地下水中碘的浓度与溶解性有机碳（DOC）浓度无显著关系,DOM分子总数越多碘浓度越高;高碘地下水较低碘水DOM分子均一性、多样性更强,氧化程度和不饱和程度更高,含更多芳香性结构.长江中游沿岸高碘地下水的形成受DOM分子组成控制,主要与不饱和程度高尤其是含芳香性结构的大分子DOM有关,含芳香性结构的DOM分子与碘络合在高碘地下水的形成过程中起重要作用.