东亚夏季风对长江口海域表面水温的影响

根据引水船海洋站 1960 - 2001 年、大戢山海洋站 1978 - 1999 年、吕四海洋站 1960 - 1990 年、滩浒岛海洋站 1984 - 2001 年、嵊山海洋站 1973 - 2001 年夏季 6 - 8 月、秋季 9 - 11 月月平均表面水温资料和美国NCEP / NCAR的北半球月平均 500 hPa 高度场、850 hPa 风场再分析资料,利用合成分析及相关分析方法,分析东亚夏季风对长江口海域 ( 区 ) 表面水温 ( SST ) 的影响.结果表明:长江口区夏季 SST 呈近岸高,外海低的特点.长江口区 SST 冷夏年,东亚夏季风较弱;暖夏年东亚夏季风较强.强夏季风年,长江口区夏季、秋季 SST 偏高;弱夏季风年,长江口区夏季 SST 偏低.     

用于水下运载器的高精度多普勒计程仪开发

文中主要介绍了高精度多普勒计程仪的原理及组成,在863计划的资助下成功开发了该多普勒计程仪的样机,并取得了很好的实验效果,正在走向产业化。     

茂名大放鸡海域文昌鱼、蛇尾分布及其与底质粒度特征的关系

为给茂名市建设文昌鱼省级自然保护区提供基础资料,根据2003年8月～2004年5月间对茂名大放鸡海域的调查结果,对文昌鱼和蛇尾的分布特性进行了研究.结果表明:文昌鱼和蛇尾均呈集群分布,在空间分布上表现为正相关关系,不存在强烈的竞争关系.文昌鱼主要分布在中值粒径MdΦ为0.4～2.2之间砂质中.在0.5≤MdΦ＜1.5范围内,文昌鱼分布密度相对地高,而在MdΦ＜0.5或MdΦ≥1.5范围内,文昌鱼分布密度相对较低.粒径0.36～0.78 mm组分＜50%时,文昌鱼分布密度≤50 ind/m2;粒径0.36～0.78 mm组分≥50%时,文昌鱼分布密度＞100 ind/m2.蛇尾分布在中值粒径MdΦ为0.2～0.8之间砂质中.粒径 0.36～0.78 mm组分占10%～50%时,蛇尾分布密度较低,而粒径0.36～0.78 mm组分占60%～80%时,蛇尾分布密度较高.     

Genetic diversity analysis with ISSR PCR on green algae Chlorella vulgaris and Chlorella pyrenoidosa

In the present study, genetic polymorphism and diversity in unicellular clones of Chlorella vulgaris Beijerinck and Chlorella pyrenoidosa Chick were studied with Inter Simple Sequence Repeats PCR (ISSR PCR). Samples including four clones of C. vulgaris and three clones of C. pyrenoidosa were purified by single-clone-choice method. For four C. vulgaris unicellular clones, the total number of the bands scored for 18 primers was 298; and the number of the polymorphic bands was 118, of which 39.6% were polymorphic. The size of PCR products ranged from 200 to 2 500 bp. The total number of bands scored for 18 primers, the number of polymorphic bands and the percentage of three C. pyrenoidosa unicellular clones was 194.83 and 30.8%, respectively. POPGENE analysis show that the average Nei genetic diversity (h *) and Shannon index of diversity (I *) in the four C. vulgaris unicellular clones was 0.2181 and 0.3208, respectively, which is slightly higher than those of the three C. pyrenoidosa unicellular clones (0.190 3 and 0.274 8), which agreed with the percentage of polymorphic bands in the mixed samples of the two species. The results suggest that ISSR is a useful method to Chlorella for intra-species genetic analysis.     

沟道偏转地形对滑坡碎屑流运动的影响研究

在沟谷地形中,滑坡碎屑流的运动常受到地形的影响,导致其运动方向发生改变,进而影响到滑坡运动速度和堆积特征。本文利用三维离散元素法,对四川都江堰三溪村高速远程滑坡进行模拟,研究滑坡体不同部位的块体失稳后,在沟道偏转地形主导下的滑坡碎屑流前缘的运动速度、各部位滑体的速度变化过程和堆积特征,并提出沟道偏转地形耗能模型分析了地形偏转造成的动能消耗。研究结果显示:滑坡前缘在地形偏转位置运动方向发生变化,导致运动速度突降;由于滑坡不同部位的滑块相对于地形偏转点具有不同的撞击角度,导致其撞击后产生不同的偏转角度,滑块的偏转角度越大,速度变化越大;由沟道偏转地形导致的滑坡运动速度减小反映了偏转地形对滑坡的动能产生的耗散,动能耗散率与cos2θ(θ为偏转地形在水平面上的偏转角度)成反比;不同部位滑块的堆积长度随偏转角度的增大而减小。本研究分析了沟谷地形偏转对滑坡碎屑流运动速度作用机制及不同部位岩土体堆积范围的影响,可为该类地形条件下滑坡的运动机制研究和防灾减灾工作提供参考。     

河流静水滩区潜流带水交换空间分布模式研究（英文）

Hyporheic zone(HZ) influences hydraulic and biogeochemical processes in and alongside streams, therefore, investigating the controlling geographic factors is beneficial for understanding the hydrological processes in HZ. Slack water pool (SWP) is an essential micro-topographic structure that has an impact on surface water and groundwater interactions in the HZ during and after high flows. However, only a few studies investigate HZ surface water and groundwater exchange in the SWP. This study used the thermal method to estimate the HZ water exchange in the SWP in a segment of the Weihe River in China during the winter season. The findings show that on the flow-direction parallel to the stream, river recharge dominates the HZ water exchange, while on the opposing flow-direction bank groundwater discharge dominates the water exchange. The water exchange in the opposing flow-direction bank is about 1.6 times of that in the flow-direction bank. The HZ water exchange is not only controlled by flow velocity but also the location and shape of the SWP. Great water exchange amount corresponds to the shape with more deformation. The maximum water exchange within the SWP is close to the river bank where the edge is relatively high. This study provides some guidelines for water resources management during flooding events.     

Effects of rainfall intensity and topography on rill development and rill characteristics on loessial hillslopes in China

Rill development is a major soil erosion process that causes severe soil degradation.This study examined the effects of representative rainfall intensities(50 and 75 mm h-1),slope gradients(10°and 150),and slope lengths(7.5 and 10.0 m)on rill development and rill characteristics on loessial hillslopes in China.Loessial soil was collected from the cropland of Ansai Town,Yan'an City,Shaanxi Province.The soil with 28.3%sand,58.1%silt,and13.6%clay was packed into a soil pan to conduct rainfall simulations in 2012.The results showed that the time of the knickpoint occurrence(5-16 min),the rill headcut extension(9-33 min),and the mean headward erosion rate(1.7-5.o cm min-1)were better representative indicators for reflecting the changes in the rill development than other indicators used in this study.For a quick evaluation of the rill erosion severity,the rill coverage ratio(1%-12%,generallyincreasing with an increase in the rainfall intensity)was better than the other indicators for treatments with different rainfall intensities,and the rill width-depth ratio(1.56-2.27,generally decreasing with an increase in the slope gradient)was better than the other indicators for treatments with different slope gradients.Furthermore,the rill inclination angle(8.2°-19.1°,significantly increasing with an increase in the slope length)and rill density(0.19-1.34 m·m-2,generally increasing with an increase in the slope length)were more suitable for evaluating the rill erosion severity on hillslopes with different slope lengths.Therefore,the representative indicators could reflect the differences in the rill development and rill characteristics under different rainfall and topographic situations.The study greatly improved the evaluation of rill erosion severity and the prediction of the development of rills for loessial hillslopes.     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

生态地貌学研究体系及其功能提升探讨

地球表层是人类生存的家园,地表形态直接或间接影响人类生活、生产和社会经济活动。地貌学和生态学是与人类关系密切的学科。自然实体与人文实体都依附于地表,研究生态与地貌关系的科学便统称为生态地貌学,直接影响人类生存选址、生存保障、生产方向、产业布局、交通、城乡建设等,因此,生态地貌学是保障人类生存与社会经济可持续协调发展的基础性与应用性极强的学科,是国家实现生态文明战略的基础性学科。生态地貌学研究生态与地貌两者相互作用形成的生态地貌综合实体,学科体系包含地貌基础学科、生态基础学科及其相互作用形成的生态地貌学科。生态地貌学科下又包含生态地貌区划学、生态地貌类型学、生态地貌资源学、生态地貌岩态学、生态地貌遥感与GIS技术、生态地貌管理与规划等分支学科,是目前仍然属于探索性的学科。生态地貌结构可表达为：由地貌与生物成分、类型、区域组合、数量构成及其空间排列组合方式。从生态地貌结构理论出发,对其功能进行系统梳理,主要可以归纳为区域结构、类型结构、资源结构、岩态结构等多种类型。不同结构类型具有不同的功能,主要功能有提升中国自然地理区划质量与空间定位功能、生态评估与生态设计功能、土地利用评估与利用结构调整功能、地质地貌灾害成因和防灾减灾对策功能等。故该研究意在实现生态地貌功能间协调、高效可持续,通过对各功能进行整合,形成功能体系,并从调控管理上提出了提升功能能力的设计路径。     

1961—1987年与1988—2014年辽宁省气候区划界线变化及可能气候成因

基于同一区划方法、指标体系,使用1961—2014年辽宁省52站气象观测资料,分析辽宁省气温、气候区划指标、范围及界线的变动特征。结果表明：辽宁省年均气温在1988年发生一次突变,突变后气温开始显著上升;≥10 ℃积温日数比较显著地响应气温突变,而干燥指数、7月平均气温变化不显著。在空间分布上区划指标值均存在不同程度的变化。① 全省≥10 ℃积温日数均出现增加,但在中西部地区显著增加;② 在盘锦-抚顺一线以北（南）,气候总体呈不显著变湿（干）趋势;③ 7月平均气温呈缓慢上升趋势。区划范围及界线位置出现更加显著地变化：① 暖温带范围主要向北向东扩展,中温带向东收缩;② 半湿润区范围主要向北向西扩展,半干旱区向西北方向收缩,湿润区范围基本不变;③ Tb范围显著向北向东扩展,Ta范围向北向东收缩。在此基础上分析了气候格局变化的可能气候成因,发现突变后≥10 ℃积温日数期间500 hPa高度场增加与4月和10月东亚冬季风减弱,4—10月东北冷涡持续天数增加和7月500 hPa高度场增加,可能分别是温度带,Tb区、Ta区和半湿润区、半干旱区变化的原因。