Study on the simulation of acoustic logging measurements in horizontal and deviated wells

The conventional acoustic logging interpretation method, which is based on vertical wells that penetrate isotropic formations, is not suitable for horizontal and deviated wells penetrating anisotropic formations. This unsuitability is because during horizontal and deviated well drilling, cuttings will splash on the well wall or fall into the borehole bottom and form a thin bed of cuttings. In addition, the high velocity layers at different depths and intrinsic anisotropy may affect acoustic logging measurements. In this study, we examine how these factors affect the acoustic wave slowness measured in horizontal and deviated wells that are surrounded by an anisotropic medium using numerical simulation. We use the staggered-grid finite difference method in time domain (FDTD) combined with hybrid-PML. First, we acquire the acoustic slowness using a simulated array logging system, and then, we analyze how various factors affect acoustic slowness measurements and the differences between the effects of these factors. The factors considered are high-velocity layers, thin beds of cuttings, dipping angle, formation thickness, and anisotropy. The simulation results show that these factors affect acoustic wave slowness measurements differently. We observe that when the wavelength is much smaller than the distance between the borehole wall and high velocity layer, the true slowness of the formation could be acquired. When the wavelengths are of the same order (i.e., in the near-field scenarios), the geometrical acoustics theory is no longer applicable. Furthermore, when a thin bed of cuttings exists at the bottom of the borehole, Fermat's principle is still applicable, and true slowness can be acquired. In anisotropic formations, the measured slowness changes with increments in the dipping angle. Finally, for a measurement system with specific spacing, the slowness of a thin target layer can be acquired when the distance covered by the logging tool is sufficiently long. Based on systematical simulations with different dipping angles and anisotropy in homogenous TI media, slowness estimation charts are established to quantitatively determine the slowness at any dipping angle and for any value of the anisotropic ratio. Synthetic examples with different acoustic logging tools and different elastic parameters demonstrate that the acoustic slowness estimation method can be conveniently applied to horizontal and deviated wells in TI formations with high accuracy.     

Strong ground motion from the November 12, 2017, <Emphasis Type="Bold">M</Emphasis> 7.3 Kermanshah earthquake in western Iran

In this paper, we analyzed the strong ground motion from the November 12, 2017, Kermanshah earthquake in western Iran with moment magnitude (M) of 7.3. Nonlinear and linear amplification of ground motion amplitudes were observed at stations with soft soil condition at hypocentral distances below and above 100 km, respectively. Observation of large ground motion amplitudes dominated with long-period pulses on the strike-normal component of the velocity time series suggests a right-lateral component of movement and propagation of rupture towards southeast. Comparison of the horizontal peak ground acceleration (PGA) from the M 7.3 earthquake with global PGA values showed a similar decay in ground motion amplitudes, although it seems that PGA from the M 7.3 Kermanshah earthquake is higher than global values for NEHRP site class B. We also found that the bracketed duration (D_b) was higher in the velocity domain than in the acceleration domain for the same modified Mercalli intensity (MMI) threshold. For example, D_b reached ~?30 s at the maximum PGA while it was ~?50 s at the maximum peak ground velocity above the threshold of MMI?=?5. Although the standard design spectrum from Iranian Code of Practice for Seismic Resistant Design of Buildings (standard No. 2800) seems to include appropriate values for the design of structures with fundamental period of 1 s and higher, it is underestimated for near-field ground motions at lower periods.     

Stability evaluation method for hyperbolic coal pillars under the coupling effects of high temperature and ground stress

We studied an underground coal gasification technique using strip mining-face mining gasifier controlled retraction injection technology (SMFM). This green mining approach offers several advantages over conventional strip mining but the stress distribution and stability of SMFM operations remain largely untested. In particular, hyperbolic coking pillars are used in SMFM compared with rectangular pillars used in traditional strip mining, which can influence the ultimate bearing capacity and stability. We use numerical simulations to investigate the influence of different factors (arch height, pillar height and width, mechanical characteristics), under the coupling effect of high temperature, on the ultimate bearing capacity of hyperbolic pillars. Our results indicate that arch height has a strong influence on pillar stress, while changes in pillar width and height are less significant. A stability evaluation method is proposed and tested on a case study in Inner Mongolia. Our theoretical results have practical significance for the promotion and application of SMFM.     

埃塞俄比亚西部布雷地区A型花岗岩成因及地质意义

为进一步约束埃塞俄比亚西部地区区域地质构造演化,选取埃塞俄比亚西部布雷地区岩浆岩开展岩石地球化学、年代学等分析.结果显示:布雷岩体具有相对较高的SiO2(66.4％～68.5％)、K2O(4.56％～4.87％)及铁值[TFeO/(TFeO+MgO]为0.75～0.79,相对较低的MgO(0.80％～1.3％)、CaO...     

The impact of boreal autumn SST anomalies over the South Pacific on boreal winter precipitation over East Asia

The possible mechanism behind the variability in the dipole pattern of boreal winter precipitation over East Asia is analyzed in this study. The results show that the SST anomalies(SSTAs) over the South Pacific Ocean(SPO) in boreal autumn are closely related to the variability in the dipole pattern of boreal winter precipitation over East Asia. The physical link between the boreal autumn SPO SSTAs and the boreal winter East Asian precipitation dipole pattern is shown to mainly be the seasonal persistence of the SPO SSTAs themselves. The seasonal persistence of the SPO SSTAs can memorize and transport the signal of the boreal autumn SSTAs to the following winter, and then stimulates a meridional teleconnection pattern from the SH to the NH, resulting in a meridional dipole pattern of atmospheric circulation over East Asia in boreal winter. As a major influencing factor, this dipole pattern of the atmospheric circulation can finally lead to the anomalous precipitation dipole pattern over East Asia in boreal winter. These observed physical processes are further confirmed in this study through numerical simulation. The evidence from this study, showing the impact of the SPO SSTAs in boreal autumn,not only deepens our understanding of the variability in East Asian boreal winter precipitation, but also provides a potentially useful predictor for precipitation in the region.     

Velocity structure building and ground motion simulation of the 2014 Ludian <Emphasis Type="Italic">M</Emphasis>s 6.5 Earthquake

This study constructs a 3D velocity structure model of the Ludian region in the Yunnan province, southwestern China, and simulates ground motion propagation of the 2014 Ludian Ms 6.5 earthquake. It aims to construct the local velocity structure of the Ludian region in three dimensions and with high precision. The simulation, using the spectral element method, is validated by field data from the Ludian earthquake records. Thus, it demonstrates that the adopted key parameters, such as the seismic source mechanism, propagation medium and geographical features of the engineering site, are appropriated for the simulation. Meanwhile, the simulation generates the ground motion distribution of the study region with an earthquakeinduced landslide in Ludian earthquake.     

Diagnostic Analysis of the Quasi-Balanced Flow of a Mesoscale Vortex During the 12 June 2008 Guangxi Rainstorm

By using the high-resolution observation data and MM5 model simulation data, the analysis on the 12 June 2008 Guangxi flash-flood rainstorm shows that the associated major mesoscale weather system of this event is a quasi-stationary mesoscale vortex, which resulted from the interaction between the midlatitude synoptic-scale waves in the westerly belt and the low-latitude warm-moist flow under the terrain effect. The genesis, development, and movement of the mesoscale vortex have significant impacts on the intensity and persistence of the severe precipitation from the Guangxi flash-flood rainstorm. This vortex is characterized by the coexistence of strong vorticity and divergence with the same order of magnitude. Well organized, deep, and moist convection was observed for a long period of time, and was produced by the interaction between the mesoscale vortex and the gravity waves. The latter was generated by the terrain effect and the ageostrophic effect of high winds in the low-level jet. According to the quasi-balanced dynamical theory, quasi-balanced flow must have existed in the mesoscale motions with both divergent and rotational winds. Thus, based on the diagnosis of the quasi-balanced flow, the PV-ωinversion method is employed to analyze the organized moist convection. The results show that 50%-70% of the vertical circulation in the rainstorm areas was quasi-balanced, so the quasi-balanced flow could well reflect features of the strong vertical motions associated with the coexistence of vorticity and divergence during this event.     

干涸尾闾湖盆区泥漠地表磨蚀释尘特征

沙粒的表面磨蚀效应是地表产尘、释尘的重要机制,针对干湖盆泥漠地表开展磨蚀释尘实验研究,对理解干湖盆地表风蚀过程及盐碱尘暴形成机理具有重要意义。对采自西居延海干涸湖盆泥漠地表土样进行室内磨蚀模拟实验,研究了不同粒级（细、中、粗）沙粒不同落沙角度（30°,45°,60°）的磨蚀效应。结果表明：（1）泥漠地表磨蚀实验中能够产生明显释尘效应的沙粒粒级阈值为中沙（0.25 mm<M_d<0.50 mm）;（2）磨蚀粒径粒级相同时,磨蚀角度会对泥漠地表磨蚀释尘速率产生影响,磨蚀量的角度排序为60°>30°>45°,但同一粒级3种角度下的磨蚀释尘率差异不显著。（3）磨蚀角度为45°时,计算了泥漠地表的质量磨蚀率与能量磨蚀率,其中中沙为0.04 g·kg^-1、0.43 g·J^-1,粗沙为0.08 g·kg^-1、0.74 g·J^-1,极粗沙为0.26 g·kg^-1、2.54 g·J^-1;在磨蚀沙粒粒级倍增而磨蚀角度不变情况下,泥漠地表磨蚀释尘率与能量磨蚀率未发生正比例线性增长变化。     

The study of metal contamination in urban topsoils of Mexico City using GIS

This research presents and discusses information concerning the spatial distribution of heavy metals (Pb, Cu, Zn, Ba, Co, Cr, Ni and V) in the urban environments of Mexico City using geographical information system and statistical analysis. Superficial soil samples (n = 146) were analyzed. The highest contamination indices were found in the north and center zone of the metropolitan area. In contrast, the surrounding rural fields show a lower impact grade. The higher concentrations of Pb, Cu, Zn and Ba were observed as being related to high vehicular traffic, nevertheless other elements such as Co, Cr, Ni and V do not show anthropogenic influence and their content can be attributed to the parental rock. The results are compared with previous surveys carried out in 2003 in order to evaluate temporal deposition trends. No changes were found on reported concentrations except for Cu and Zn, whose concentration has increased in later years. The results suggest that spatial distribution analysis and results in comparison with previous studies could be useful for the management and sustainable development of the metropolitan area of Mexico City.     

采用体波谱振幅相关系数方法研究地震集中区震源机制变化过程

同一震源区两次地震到达某台站的直达P波、S波零频观测谱值之比与其辐射图型因子之比线性相关,而后者取决于震源机制的几何特性。用波形记录计算谱振幅相关系数,认为该系数是震源机制异同的归一化数值描述。据此对2003年青岛序列及冀鲁豫交界地区小震集中区地震事件进行聚类分组,给出序列事件的滑动平均相关系数的时序曲线。研究结果表明:青岛序列的滑动平均相关系数时序曲线存在由一致到发散的变化过程,即震源区应力场强度由相对集中向逐步分散过度;冀鲁豫交界地区小震集中区谱振幅相关系数较低,震源机制各不相同,区域应力积累没有形成任何一个优势方向。