TEM法在寻找煤矿突水巷道中的应用

在地质勘探中,TEM法体积效应影响小,探测深度大,对低阻反映灵敏,因此,其作为一种物探手段,已被广泛应用于地球物理勘探的各个领域。TEM法在煤矿突水巷道勘探中,曲线形态为高电位单峰异常,这个特征用于煤矿充水巷道探测准确度高,效果明显。     

含矿流体混合反应与成矿作用的动力平衡模拟研究

本文在约定热液体系中成矿元素成矿速率(成矿过程中单位时间内单位体积所合成矿元素重量的变化)的基础上。借助于物质-热-化学-成矿四重全耦合的研究思路，构建了均匀热液体系、层状热液体系、岩浆侵入热液体系下成矿元素的迁移、富集、溶解与沉淀作用数值模型。模拟结果表明；(1)硫化物(H2S)和硫酸盐(SO42-)流体的混合反应是成矿热液体系中铅、锌、铁成矿元素成矿的重要控制因素；(2)均匀介质、岩浆侵入或地质构造的存在，对成矿元素在成矿流体运移的速度、流线、温度分布和成矿元素的溶解与沉淀分布都有着各自的特征．不同的成矿环境或成矿背景制约了成矿元素的迁移与富集以及矿体的产出定位。暗示成矿环境及成矿速率对热液体系中成矿元素的沉淀与溶解具重要作用；成矿流体的混合反应是成矿作用发生的重要机制之一。在成矿理论研究中必须充分考虑不同地质构造因素的约束。     

HHT方法在地震工程中的应用之初步探讨

详细介绍了一种新的非线性、非平稳信号的处理方法-HHT，讨论了其有效性和优越性，简单介绍了其在地震工程中的应用前景，并利用HHT处理了地震工程中常用El Centro地震记录，得到了该记录的振幅-频率-时间分布特性，并将得到的边际谱与傅立叶谱做了对比。     

天津地区井水位年变异常研究

近年来 ,中国地震预报学者开始关注井水位的年变异常及其中短期预测意义问题 ,但井水位年变异常判别采用动态图像的定性对比方法 ,表现出一定的随意性。针对这种现状 ,文中引进概率论与数理统计中的随机过程理论与时间序列分析技术 (盛骤等 ,1989) ,提出了“井水位动态年周期法”与“相对时段速率比较法” ,解决了井水位年变异常的定量识别方法 ,并应用到天津井网 2 1口井的观测数据 (1985年以来 )分析中 ,证明了该方法的可行性与有效性。分析结果表明 ,天津井网中有 7口井在首都圈邻区 4次中强 (MS≥ 5 .8)地震之前 ,表现出 17井次的井水位年变异常 ,且多在震前 1.5～6个月内出现 ,从而再次证明了井水位年变异常具有一定的中短期预测意义     

冠县引黄井渠结合灌区机井建设浅议

针对目前冠县引黄井渠结合灌区机井建设发展中主要存在机井发展不平衡、机井退化、老化、成井质量差等问题，因地制宜，提出了今后灌区发展机井建设的具体措施。     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

基于RDBMS的海量数字高程模型系统

介绍了用于海量数字高程模型数据的管理、应用分析以及可视化的系统GeoDEMDB，采用部件对象模型技术，实现了数据管理、空间分析和大范围三维场景漫游的集成，并提供了灵活的选择性。     

基于RBF神经网络的遥感影像分类算法研究

提出了运用径向基函数神经网络和K均值法进行遥感影像分类的算法，以实际的遥感影像分类为例，通过与传统的最小距离法进行比较，对RBF神经网络分类器的优点进行了归纳，并就算法实施中的一些问题进行了探讨。分析结果表明，RBF神经网络是一种有效的图像分类器。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

杭州市区春节期间空气质量变化特点

分析近3年春节期间的空气质量资料，结果表明，杭州市区环境空气中PM10、SO2、NO2浓度较高，烟花爆竹燃放期间3种污染物出现高峰值，这与烟花爆竹燃放有关，PM25／PM10的比值高于年均值。