Mathematical Geosciences - When too few field measurements are available for the geological modeling of complex folded structures, the results of implicit methods typically exhibit an... 相似文献
One main problem in the modeling of mineral deposits is to design a block model that divides the deposit into homogeneous subdomains. The spatial uncertainty in the geological boundaries becomes a critical factor prior to the modeling of the ore properties. For this reason, reducing the uncertainty of geological models leads to an improved mineral resource evaluation. This research work addresses the problem of updating the geological models by using actual online-sensor measurement data. A novel algorithm is provided, which integrates the discrete wavelet transform to the Ensemble Kalman Filter for assimilating online-sensor production data into geological models. The geological realizations in each time step are transformed to frequency coefficients and, after each assimilation step, the updated realizations are back-transformed to the original categorical distribution. Furthermore, a reconciliation process is performed to compare the online-sensor data derived from the production blocks and the updated realizations in each time step. The algorithm is illustrated through an application to the Golgohar iron deposit located in SW of Sirjan, Iran, and proves to reproduce the statistical parameters and connectivity values of the primary geological realizations.
Connectivity of high/low-permeability areas has been recognized to significantly impact groundwater flow and solute transport. The task of defining a rigorous quantitative measure of connectivity for continuous variables has failed so far, and thus there exist a suite of connectivity indicators which are dependent on the specific hydrodynamic processes and the interpretation method. Amongst the many existing indicators, we concentrate on those characterizing connectivity between the points involved in a hydraulic or tracer test. The flow connectivity indicator used here is based on the time elapsed for hydraulic response in a pumping test (e.g., the storage coefficient estimated by the Cooper–Jacob method, Sest). Regarding transport, we select the estimated porosity from the breakthrough curve (est). According to Knudby and Carrera [Knudby C, Carrera J. On the relationship between indicators of geostatistical, flow and transport connectivity. Adv Water Resour 2005;28(4):405–21] these two indicators measure connectivity differently, and are poorly correlated. Here, we use perturbation theory to analytically investigate the intrinsic relationship between Sest and est. We find that est can be expressed as a weighted line integral along the particle trajectory involving two parameters: the transmissivity point values, T, and the estimated values of Sest along the particle path. The weighting function is linear with the distance from the pumping well, thus the influence of the weighting function is maximum at the injection area, whereas the hydraulic information close to the pumping well becomes redundant (null weight). The relative importance of these two factors is explored using numerical simulations in a given synthetic aquifer and tested against intermediate-scale laboratory tracer experiments. We conclude that the degree of connectivity between two points of an aquifer (point-to-point connectivity) is a key issue for risk assessment studies aimed at predicting the travel time of a potential contaminant. 相似文献
In this article, we propose a new model, called LBLR for Linear Backwater Lag-and-Route, which approximates the Saint-Venant equations linearized around a non-uniform flow in a finite channel (with a downstream boundary condition). A classical frequency approach is used to build the distributed Saint-Venant transfer function providing the discharge at any point in the channel in the Laplace domain with respect to the upstream discharge. The moment matching method is used to match a second-order-with-delay model on the theoretical distributed Saint-Venant transfer function. Model parameters are then expressed analytically as functions of the pool characteristics. The proposed model efficiently accounts for the effects of downstream boundary condition on the channel dynamics. 相似文献
Despite the undeniable influence of the angle of seismic incidence on seismic demand, limited research has been performed to determine its effect when assessing the probabilistic seismic performance of a structure. Since the ground motion group size has a well-known significant effect on the variability of collapse risk, the joint effect of both the ground motion group size and the angle of seismic incidence on the estimation of collapse risk is investigated. Results show that the two variables have a different effect on the collapse risk estimates, with one affecting the bias in the expected value of the estimates and the other their variability. In order to ensure acceptable levels of variability and bias, practical proposals are made regarding the minimum number of records and angles of seismic incidence that should be considered. 相似文献
Ecotoxicity of three potentially toxic metals (PTM) (Cu, Zn, and Cr) in a slightly acidic sandy soil is tested using the soil respiration test (OECD‐217) in order to determine EC50 values for the carbon transformation activity of microorganisms. Addition of an organic amendment of Populus leaves is also crossed with metal spiking in order to investigate possible interaction with metal toxicity. Soil respiration is measured at day 1 and 28 after the soil spiking with the PTM to assess short‐term effects on soil microbial activity. Of the three metals tested, Cu shows the highest toxicity at the longest exposure times (day 28) and Zn shows a strong inhibitory effect in the short‐term (day 1), even though later toxicity diminish significantly. Cr is the least toxic studied PTM. Organic amendment outweighs any adverse effects of these metals, increasing soil respiration, even in the treatments with high doses of metals. 相似文献
Multibeam echosounders are becoming widespread for the purposes of seafloor bathymetry mapping, but the acquisition and the use of seafloor backscatter measurements, acquired simultaneously with the bathymetric data, are still insufficiently understood, controlled and standardized. This presents an obstacle to well-accepted, standardized analysis and application by end users. The Marine Geological and Biological Habitat Mapping group (Geohab.org) has long recognized the need for better coherence and common agreement on acquisition, processing and interpretation of seafloor backscatter data, and established the Backscatter Working Group (BSWG) in May 2013. This paper presents an overview of this initiative, the mandate, structure and program of the working group, and a synopsis of the BSWG Guidelines and Recommendations to date. The paper includes (1) an overview of the current status in sensors and techniques available in seafloor backscatter data from multibeam sonars; (2) the presentation of the BSWG structure and results; (3) recommendations to operators, end-users, sonar manufacturers, and software developers using sonar backscatter for seafloor-mapping applications, for best practice methods and approaches for data acquisition and processing; and (4) a discussion on the development needs for future systems and data processing. We propose for the first time a nomenclature of backscatter processing levels that affords a means to accurately and efficiently describe the data processing status, and to facilitate comparisons of final products from various origins. 相似文献
The increased use of backscatter measurements in time series for environmental monitoring necessitates the comparability of individual results. With the current lack of pre-calibrated multibeam echosounder systems for absolute backscatter measurement, a pragmatic solution is the use of natural reference areas for ensuring regular assessment of the backscatter measurement repeatability. This method mainly relies on the assumption of a sufficiently stable reference area regarding its backscatter signature. The aptitude of a natural area to provide a stable and uniform backscatter response must be carefully considered and demonstrated by a sufficiently long time-series of measurements. Furthermore, this approach requires a strict control of the acquisition and processing parameters. If all these conditions are met, stability check and relative calibration of a system are possible by comparison with the averaged backscatter values for the area. Based on a common multibeam echosounder and sampling campaign completed by available bathymetric and backscatter time series, the suitability as a backscatter reference area of three different candidates was evaluated. Two among them, Carré Renard and Kwinte, prove to be excellent choices, while the third one, Western Solent, lacks sufficient data over time, but remains a valuable candidate. The case studies and the available backscatter data on these areas prove the applicability of this method. The expansion of the number of commonly used reference areas and the growth of the number of multibeam echosounder controlled thereon could greatly contribute to the further development of quantitative applications based on multibeam echosounder backscatter measurements. 相似文献