铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

Characterization of Turbot(Scophthalmus maximus) Skin and the Extracted Acid-Soluble Collagen

The biochemical composition of the turbot skin was investigated. The moisture level of the skin was found to be 51.4%. Based on dry matter content, there were relatively high protein(82.1%) and lipid(13.1%) concentrations in the turbot skin. Mineral element analysis revealed that the turbot skin had high Ca content(2069.0 mg kg^-1), and the concentrations of toxic heavy metals Hg and Pb were less than 0.005 mg kg^-1, which indicates that the turbot skin is a safe resource for collagen production. The sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) analysis showed that acid-soluble collagen(ASC) extracted from the turbot skin was type-I collagen. The imino acid content of the ASC was 241.6 per 1000 amino acids, which suggests a relatively high denaturation temperature. The Fourier transform infrared(FTIR) spectra of ASC reflected a highly stable structure, and the measured denaturation temperature of ASC was 29.5℃, which is higher than those from many temperate fishes. ASC was the most soluble at pH 4.0, and when the pH values were below or above 4.0, the solubility decreased rapidly. The ASC exhibited a relatively high solubility when NaCl concentration was lower than 2%. These results show that turbo skin can be employed as a source for producing collagen with high quality.     

Base cation concentrations in forest litter and topsoil have different responses to climate and tree species along elevational gradients

The forest litter is an essential reservoir of nutrients in forests, supplying a large part of absorbable base cations(BC) to topsoil, and facilitating plant growth within litter-soil system. To characterize elevational patterns of base cation concentrations in the forest litter and topsoil, and explore the effects of climate and tree species, we measured microclimate and collected the forest litter and topsoil(0-10 cm) samples across an elevational range of more than 2000 m(1243 ～ 3316 m a.s.l.),and analyzed the concentrations of BC in laboratory. Results showed that: 1) litter Ca concentration displayed a hump-shaped pattern along the elevational gradients, but litter K and Mg showed saddle-shaped patterns. Soil Ca concentration increased with elevation, while soil K and Mg had no significant changes. 2) Ca concentration in the forest litter under aspen(Populus davidiana) was significantly higher than that in all other species, but in topsoil, Ca concentration was higher under coniferous larch and fir(Larix chinensis and Abies fargesii). Litter K and Mg concentrations was higher under coniferous larch and fir, whereas there were nosignificant differences among tree species in the concentrations of K and Mg in topsoil. 3) Climatic factors including mean annual temperature(MAT), growing season precipitation(GSP) and non-growing season precipitation(NGSP) determined BC concentrations in the forest litter and topsoil. Soil C/N and C/P also influenced BC cycling between litter and soil. Observation along elevations within different tree species implies that above-ground tree species can redistribute below-ground cations, and this process is profoundly impacted by climate. Litter and soil Ca, K and Mg with different responses to environmental variables depend on their soluble capacity and mobile ability.     

西藏定结地区爬坡沙丘粒度特征分析

通过对西藏定结地区典型爬坡沙丘表层沉积物的形态参数、粒度组成和粒度参数等进行分析,揭示其粒度特征。结果表明：（1）爬坡沙丘表层沉积物以细砂和中砂为主,极细砂含量较少,同时含有少量粉砂和粗砂,不含粘土成分。（2）沙丘平均粒径范围1.98~2.41 Ф,分选系数变化范围为0.45~0.75,属中等分选,偏度变化范围为0.01~0.12,呈近对称至正偏分布,峰度变化范围为0.94~1.01,呈中等尖锐峰态。（3）从样品PPSQ1~PPSQ6,随着高度和距离的增加,沙丘表层沉积物平均粒径先变细后变粗,分选不断变好。（4）爬坡沙丘表层沉积物主要来源于河漫滩。（5）与雅鲁藏布江、东昆仑山地区爬坡沙丘对比可知,定结地区的沙丘粒径较粗,分选较好,主要是物源及风力分选作用的共同结果。     

基于空间杜宾模型的中国高学历人才时空分异研究

基于2001~2016年全国统计年鉴数据,采用集聚度分析和空间自相关分析等方法,描绘中国高学历人才的空间格局及变化,并采用空间杜宾模型,探究影响高学历人才空间分布的主要因素及空间溢出效应。结果表明：（1）中国人才分布表现出较大的非均衡性,集聚程度表现为东南高、西北低,且2000~2015年间,人才稀疏区面积下降而集聚区面积上升;（2）中国人才密度的全局莫兰指数为正,表明中国的高学历人才分布具有一定的空间集聚特征,而2000~2015年此指数有所下降,表明人才分布整体上有分散趋势。2000年热点区与次级热点区主要分布于京津冀和长三角地区,其中热点区为京、津、沪;而2015年,热点以及冷点区域均有所扩张,表明局部地区人才仍然有集中化的趋势;（3）工资水平、高校发展、公共服务水平是决定人才空间分布的主要因素,但没有证据表明生活支出比、失业率、房价有显著影响。人才分布具有明显的空间溢出效应,同时工资水平、高校发展、公共服务水平等影响因素也具有明显的空间溢出效应。     

黑海参(Holothuria atra)对环境沉积物的摄食选择及消化系统功能适应性研究

黑海参(Holothuria atra)是热带珊瑚礁大型底栖动物群落中的代表种类之一,其摄食活动对珊瑚礁生境底质有机物的循环再利用具有重要作用。本文研究了三亚蜈支洲岛典型热带珊瑚礁海域野生黑海参的沉积物选择特征及其触手和消化系统结构功能的适应性。结果表明,黑海参摄取的沉积物颗粒相对较粗,其中粒径0.25mm部分占到了总重量的96.67%。触手上3—6个乳突形成乳突簇[直径(283.00±40.94)μm],适宜摄取大颗粒沉积物。黑海参胃内含物有机物含量显著高于环境沉积物,证实其对有机物含量的选择性;粒径0.25mm部分有机物含量占摄入总有机物量的75%,与环境沉积物中相同粒度的有机物总量占比接近(76%),表明黑海参选择的沉积物粒径范围有效保证了其高效摄入有机质。黑海参前肠的脂肪酶、淀粉酶、纤维素酶、胰蛋白酶活性最高,同时绝大部分的有机质(98.33%)在前肠被吸收。组织学定量分析表明,黑海参前肠黏膜层厚度最大,占总厚度的56.33%,这与其高效吸收有机质的功能相适应;后肠的肠壁总厚度和黏膜下层、肌层厚度均显著高于前肠和中肠,表明其具有相对更好的弹性和收缩能力,适合于大颗粒有机质的高效输送与排出。研究结果证实,黑海参摄食器官和消化道独特的结构与功能保证了其在珊瑚砂粗颗粒生境中高效摄取有机物。     

GNSS长度测量不确定性试验分析

针对GNSS定位结果总是存在点位误差,由此导出的长度测量值为点位误差的非线性映射,对于长距离定位量测,其非线性影响较小,线性化近似一般可以满足精度要求,但对于短距离量测,其非线性影响不容忽略的问题。该文探讨了GNSS长度测量不确定性来源,通过单点定位和差分定位试验验证了长度测量不确定性与定位精度、点间距离的关系,测试不同偏差和方差估计公式的适用性。试验表明,对于GNSS高精度、长基线测量,其长度统计偏差可以忽略,且方差为基线向量的方向方差;现有不确定性评估公式在超短基线情形适用性会变差,在这种情形下,试验表明二阶偏差和方差估计更为精确。通过消除长度统计偏差得到无偏估计量,可以有效提高距离量测的可靠性,为提高用户距离量测精度提供有益帮助。     

辽东湾北部海域营养状况与趋势评价

根据 1999-2006 年 6-8 月的调查数据,分析辽东湾北部海域的营养水平及变化趋势,以了解辽东湾北部海域营养水平的分布特点及污染状况.由 E 值和 CN/CP 值的总体评价结果来看,辽河口、双台子河口和大凌河口海域的富营养化程度较高,属于磷中等限制潜在性富营养区,而锦州湾海域污染相对较轻,属于中度营养区;在时空分布上,辽东湾北部海域 1999 年与 2006 年污染较为严重,中间年份污染相对较轻.针对辽东湾的具体环境用 CN/CP 值的评价模式更能揭示出营养盐限制对富营养化的影响.     

渗流井合理竖井降深确定

通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响.建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程.提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定.对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节.     

数字化城市管理系统基础框架数据库建设方法研究

结合郑州数字化城市建设工程的实施,制定了数字化城市建设中基础框架数据库建设的技术路线,采用基于AutoCAD平台一体化制作DLG及城市管理专题数据的方法。结果证明该方法可以整合数据生产,有效避免数据的冗余和矛盾,提高生产效率和数据质量,取得了良好效果。