New Ar‐Ar Isotopic Ages of the Southern Tianshan Mountains,Kyrgyzstan and their Geological Implications

正Objective The Late Paleozoic Southern Tianshan Ocean is usually considered to be the last-closed ocean in the Tianshan Orogeny.However,there is still no consensus if this is indeed the case.Blueschist,eclogite and ophiolite are present in the Atbashi Range,Kyrgyzstan,which are believed to be the relics of the Southern Tianshan Ocean.New data obtained through Ar-Ar isotopic analysis in this     

Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.     

乌尉高速公路边坡稳定性综合评价

针对乌尉(乌鲁木齐至尉犁)高速公路地处高寒、高海拔、高地震烈度区,地质环境条件复杂的特点,提出一种基于多判据的边坡稳定性模糊综合评价方法。首先,分析研究三高地区公路沿线工程地质条件、边坡岩体结构特征及其变形破坏模式。在此基础上,以TSMR评价体系为框架,考虑地震荷载对边坡稳定性的影响,引入地震作用影响系数β,建立了适用于“三高”地区公路边坡岩体质量分级体系THRSMR;基于边坡可靠性分析理论,归纳总结Monte Carlo法的操作步骤,并借助GEO-SLOPE软件,给出各研究边坡的可靠度指标与失效概率;最后,将定性评价、极限平衡分析、可靠度分析和数值计算的结果分别作为基础指标,采用模糊综合评价方法对每一边坡的边坡稳定性,给出进一步量化结论。其结果对类似地区高速公路边坡稳定性评价具有一定的参考价值。     

层状土毛细水上升过程中Lucas-Washburn模型评价及修正

受界面效应影响,毛细水在层状土中运移规律还难以用描述均质土中水分运移规律的Lucas-Washburn（LW）渗吸模型进行描述。基于此,本文设计了层状土室内模型试验,采用分布式的主动加热光纤法（简称AHFO）监测毛细水上升过程。根据AHFO测试结果,进一步对LW模型进行了修正,提出了适用于描述层状土中毛细水上升规律的ILW模型,并对ILW模型进行了试验验证。试验结果表明:（1）当毛细水湿润锋抵达“黏土（下部）-砂土（上部）”界面时,会产生“毛细屏障作用”,从而导致上部砂土中毛细水含水率急剧下降;（2）“毛细屏障作用”由砂土和黏土中的基质吸力不均衡造成,基质吸力大小由含水率决定;（3）当毛细水湿润锋抵达“砂土（下部）-黏土（上部）”界面时,在界面处出现“反毛细屏障作用”,从而导致上部黏土层中的含水率比相邻下部砂土层含水率更高;（4）虽然常见的LW模型可准确预测均质土中毛细水上升高度及速率,但受“毛细屏障作用”和“反毛细屏障作用”影响,LW模型在层状土中失效;（5）相比LW模型,ILW模型精度更高,能够更加准确地描述层状土中毛细水上升规律。     

基于振动台实验的典型滑坡单元体震动滑移特征发现

针对典型滑坡滑动单元在地震过程中的滑移特征,制作了典型振动台物理模型,通过输入不同频率、峰值和持时的正弦地震波,开展了一系列的实验研究工作,得了一些比较有意义的新成果:（1）在输入地震波强度足够大时会出现瞬时沿滑带向上的滑移行为,存在向上和向下两个滑移屈服加速度;（2）在研究分析中,不可以坡底输入的地震加速度值而应以滑带处局部加速度值作为判别滑移与否和滑移量大小的计算数据;（3）滑体沿滑带产生的永久滑移总量随地震波持时增加呈阶梯波状增长;（4）不同时刻任一周期的振动滑移特征相对独立,且每一地震波周期时间内具有几乎相同的周期性滑移特征,总体滑移量是无数周期内滑移量的累加;（5）在每一地震波周期时间内,滑体向上和向下的滑移特征受控于相应向上和向下屈服加速度,其向上和向下滑移矢量和构成每一周期时间内的永久位移。     

大应变静力触探数值模拟及锥形因子影响因素分析

以模拟圆锥在不排水黏土中的静力贯入和分析其影响因素为目标,假设土体为均质弹性—完全塑性材料且服从Mises屈服准则,采用任意拉格朗日—欧拉(ALE)网格划分技术确保锥尖土体在大应变条件下的网格质量,进行大应变有限元数值模拟,并分析了稳定状态下土体刚度指数、原位应力状态和锥尖粗糙程度对塑性区半径与锥形因子的影响,获得了锥形因子表达式。模拟结果表明:塑性区随着刚度指数的增大而增大,锥尖周围塑性区的径向扩张处于柱形孔扩张和球形孔扩张之间,更接近于球形孔扩张;锥形因子随土体刚度指数、锥尖粗糙程度的增大而增大,随土体原位应力状态参数的增大而减小;得到的锥形因子表达式可以量化土体刚度指数、原位应力状态和锥尖粗糙程度的影响,具有较高的精确度。