A technique for calibration of monostatic echosounder systems

A calibration technique has been adapted to render complete system calibrations of high-frequency acoustical instrumentation. This is based on standard targets; specifically, precisely manufactured spheres composed of tungsten carbide with 6% cobalt binder. The use of multiple sphere sizes was found to be advantageous, both as an independent check of the calibrations, and so that resonances in the sphere responses at certain frequencies could be avoided. Complete system gains and beam patterns, which include effects of bandpass filters and finite-pulse lengths, were determined by moving the spheres individually in the transducer far-fields. Use of this procedure ensures control over the acoustical characteristics of transducers, which may change from the time of manufacture and first testing due, for example, to platform mounting. It also provides a direct means of measuring the sampling volume at relatively high and constant signal-to-noise ratios. Implementation of this technique is discussed using a multifrequency sonar system as an example     

A 20‐ka climate record from Central Himalayan loess deposits

The southwest monsoon that dominated Central Himalaya has preserved loessic silt deposits preserved in patches that are proximal to periglacial areas. The occurrence of such silts suggests contemporary prevalence of cold and dry northwesterly winds. Field stratigraphy, geochemistry, mineral magnetism, infrared stimulated luminescence (IRSL) and radiocarbon dating has enabled reconstruction of an event chronology during the past 20 ka. Three events of loess accretion could be identified. The first two events of loess deposition occurred betweem 20 and 9 ka and were separated by a phase of moderate weathering. Pedogenesis at the end of this event gave rise to a well‐developed soil that was bracketed around 9 to > 4 ka. This was followed by the third phase of loess accretion that occurred around 4 to > 1 ka. Episodes of loess deposition and soil formation are interpreted in terms of changes in the strength of the Indian southwest monsoon. Copyright © 2005 John Wiley & Sons, Ltd.     

The Preboreal climate reversal and a subsequent solar‐forced climate shift

Accurate chronologies are essential for linking palaeoclimate archives. Carbon‐14 wiggle‐match dating was used to produce an accurate chronology for part of an early Holocene peat sequence from the Borchert (The Netherlands). Following the Younger Dryas–Preboreal transition, two climatic shifts could be inferred. Around 11 400 cal. yr BP the expansion of birch (Betula) forest was interrupted by a dry continental phase with dominantly open grassland vegetation, coeval with the PBO (Preboreal Oscillation), as observed in the GRIP ice core. At 11 250 cal. yr BP a sudden shift to a humid climate occurred. This second change appears to be contemporaneous with: (i) a sharp increase of atmospheric ¹⁴C; (ii) a temporary decline of atmospheric CO₂; and (iii) an increase in the GRIP ¹⁰Be flux. The close correspondence with excursions of cosmogenic nuclides points to a decline in solar activity, which may have forced the changes in climate and vegetation at around 11 250 cal. yr BP. Copyright © 2004 John Wiley & Sons, Ltd.     

Paleostress-tensor analysis of late deformation events in the Odenwald Crystalline Complex and comparison with other units of the Mid-German Crystalline Rise, Germany

Summary Geometric data of fault planes and fault plane lineations, together with the observed sense of shear on the slip planes, were used to calculate paleostress tensors and fields responsible for the post metamorphic peak D3 and D4 deformation events in the four Odenwald units sensu Krohe (1991). The paleostress fields were calculated using the method of Will and Powell (1991). As inferred from the paleostress analysis, the D3 strike-slip deformation west of the Otzberg fault zone was caused by a, ± N-S directed, compressional regional stress field, with shallowly plunging σ₁ axes and σ₃ directions that plunge at shallow to moderate angles to the E or W; the calculated mean orientations are: σ₁ 06 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. The B?llsteiner Odenwald east of the Otzberg fault zone was not affected by this stress field. This implies that the Bergstr?sser and B?llsteiner Odenwald were spatially separated and formed independent crustal blocks during D3. The D4 faulting event is recognised in all areas investigated, even though most prominently in units III and IV, and juxtaposed the Bergstr?sser and B?llsteiner Odenwald. This faulting episode was caused by a paleostress field with a steeply westerly plunging σ₁ axis and a shallowly southsoutheasterly plunging σ₃ axis. The orientations of the principal stresses are: σ₁ 52 → 270, σ₂ 38 → 085 and σ₃ 06 → 174. With continued deformation from D3 to D4, there was a progressive change in the orientation of the stress field indicating a change from a N-S compressional to extensional stress field, accompanied by the progressive development of strike-slip faults and late normal faults. Paleostress field orientations in the Pfalz Forest, SW of the Odenwald, determined by Fl?ttmann and Oncken (1992) are very similar to those obtained for the Odenwald region and indicate a regionally consistent stress pattern in the southwestern part of the Mid-German Crystalline Rise (MGCR) during strike-slip and normal faulting deformations.

---

Zusammenfassung Paleostress-Tensor Analyse sp?ter Deformationsereignisse im Odenwald-Kristallin und ein Vergleich mit anderen Einheiten der Mitteldeutschen Kristallinzone, Deutschland Für die vier Odenwald-Einheiten im Sinne von Krohe (1991) wurden Pal?ostressfelder für die Blattverschiebungs- und Abschiebungsereignisse D3 und D4 mit der Methode von Will und Powell (1991) berechnet. Die Analyse ergibt, da? das regionale Spannungsfeld, das westlich der Otzberg-Zone im Bergstr?sser Odenwald zum D3-Ereignis führte, ein ± N-S gerichtetes kompressives Stresssfeld war. Die σ₁-Achse f?llt flach nach N bzw. S ein, die σ₃-Achse mit kleinen bis moderaten Winkeln nach E bzw. W; die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 08 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. Der B?llsteiner Odenwald, ?stlich der Otzberg-Zone, wurde von diesem Spannungsfeld nicht erfa?t. Dies impliziert, da? Bergstr?sser und B?llsteiner Odenwald w?hrend des D3-Ereignisses voneinander getrennt waren und separate Krusteneinheiten darstellten. Auswirkungen der D4-Deformation k?nnen im gesamten Untersuchungsgebiet erkannt werden, am st?rksten jedoch in den Einheiten III und IV. Dieses Ereignis wurde von einem Pal?ostressfeld mit einer steil nach W einfallenden σ₁- und einer flach nach SSE einfallenden σ₃-Achse verursacht und führte zum Zusammenschlu? von Bergstr?sser und B?llsteiner Odenwald. Die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 52 → 270, σ₂ 38 → 085 und σ₃ 06 → 174. Die Rotation der Hauptspannungsrichtungen war mit einer ?nderung von einem kompressionalen N-S gerichteten (D3) hin zu einem extensionalen (D4) Stressfeld verbunden. Die erzielten Ergebnisse sind sehr ?hnlich mit Resultaten, die Fl?ttmann und Oncken (1992) im Pf?lzer Wald ermittelten. Dies weist auf ein regional übereinstimmendes Spannungsfeld im SW-Teil der Mitteldeutschen Kristallinzone hin.

---

---

Received July 8, 1999; revised version accepted March 28, 2000     

A model for the constant-head pumping test conducted in vertically fractured media

An analytical model for the constant-head pumping test is developed for a partially penetrating well that has a finite thickness skin, and intersects a single vertical fracture. In the model, the fracture is fully confined and flow occurs only in the fracture. The model is developed using Laplace transform and finite Fourier transform methods. The model is to be used for analysing well test data from vertically fractured media and for verifying numerical models. Dimensionless curves are used to study the effects of a finite thickness skin and a partially penetrating wellbore. In the presence of a finite thickness skin, or a partially penetrating wellbore, a typical flow response for the constant-head pumping test has three distinct periods of flow corresponding to small-, intermediate- and large-time. Small- and large-time approximations are presented for the model. For tests where the wellbore is fully penetrating, or the partial penetration ratio is known, these approximations can be used to analyse field data.     

Realisation of a celestial system based on VLBI geodynamics programs

The relative orientations of various VLBI celestial reference frames are evaluated on the basis of coordinate differences of common sources. It is shown that an accuracy better than 0.001 can be achieved. Possible regional deformations in the different catalogues are investigated; they are found to reach a few 0.001 in some restricted zones. The application of these studies to the realisation of a combined celestial reference frame consistent with the BIH Terrestrial System is outlined.     

Harpacticoida taxocen diversity in the silty-sandy littoral zone of Kandalaksha Bay of the White Sea

The fauna composition, ecological groups, and life forms of Harpacticoids of soft littoral grounds from 15 sites off the Karelian coast in Kandalaksha Bay of the White Sea were studied. Six types of harpacticoid taxocens with different sets of dominating species are described. On silty sands with clear signs of desalination, the Stenchelia palustris taxocen is common; medium-grained sands are characterized by the Heterolaophonte minuta, Paraleptastacus kliei — Huntemannia jadensis, and Amphiascoides nanus — Scottopsyllus minor taxocens; while on coarse sands, the Ameira parvula and Ameira scotti — Mesochra lilljeborgi taxocens have developed. The diversity of the taxocens is partly explained by the differences in the grain-size composition and salinity at different sites. In addition, groups of various taxocens dwelling on the same type of the sediments were found in different minor bights of the coastline.     

Laboratory simulation of volatilisation from melts induced by micrometeoroid impacts

The laboratory simulation experiments on volatilization from the melts formed due to micrometeoroid impacts on the lunar surface were carried out. The simulation was performed using modulated laser pulses incident on rocks and minerals in vacuum; in so doing microcraters on the targets, glass particles, condensates were formed and gases solved in the bulk of the rock and mineral grains were released. It is shown that volatilization from only the crater glass layers is negligible, which fully confirms the theoretical predictions of Nussinov and Chernyak.The volatilizations from the drops formed by the micrometeoric impacts can be noticeable. For micron-sized drops, predominant among the others after the impact, the volatilization of Na, K and other volatiles can be up to 10 to 20%. For larger-sized (d10² m) drops the volatilization should lead to the appearance of the significant gradients of the element concentrations over the particle cross-section and as a result of their normalization it leads to the surface enrichment by some elements (Si and others).The mechanism of dust formation due to the surface rocks attack by volatilizing alkaline metals (Naughtonet al.) on the Moon probably is not effective. It is the consequence of such a fact that the condensate of the target materials evaporated due to other simultaneous micrometeoric impacts and had the same (as the target has) elemental composition is the very strong background for volatilizing and condensating alkaline elements.Preliminary conclusions about a possible correlation between the composition and the sizes of dust particles in the Solar system and in the Universe (at similar initial composition) have been drawn.