GPS for real-time earthquake source determination and tsunami warning systems

We identify the key design aspects of a GPS-based system (and in the future, GNSS-based systems) that could contribute to real-time earthquake source determination and tsunami warning systems. Our approach is based on models of both transient and permanent displacement of GPS stations caused by large earthquakes, while considering the effect of GPS errors on inverted earthquake source parameters. Our main conclusions are that (1) the spatial pattern, magnitude, and timing of permanent displacement of GPS stations can be inverted for the earthquake source and so predict the 3D displacement field of the ocean bottom, thus providing the initial conditions for tsunami models, and (2) there are no inherently limiting factors arising from real-time orbit and positioning errors, provided sufficient near-field GPS stations are deployed. This signal could be readily exploited by GPS networks currently in place, and will be facilitated by the IGS Real-Time Project as it comes to fruition.     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Petrogenesis of voluminous mid-Tertiary ignimbrites of the Sierra Madre Occidental,Chihuahua, Mexico

The mid-Tertiary ignimbrites of the Sierra Madre Occidental of western Mexico constitute the largest continuous rhyolitic province in the world. The rhyolites appear to represent part of a continental magmatic arc that was emplaced when an eastward-dipping subduction zone was located beneath western Mexico.In the Batopilas region of the northern Sierra Madre Occidental the mid-Tertiary Upper Volcanic sequence is composed predominantly of rhyolitic ignimbrites, but volumetrically minor lava flows as mafic as basaltic andesite are also present. The basaltic andesite to rhyolite series is calc-alkalic and contains 1% K₂O at 60% SiO₂. Trace element abundances of a typical ignimbrite with 73% SiO₂ are Sr 225 ppm, Rb 130 ppm, Y 32 ppm, Th 12 ppm, Zr 200 ppm, and Nb 15 ppm. The entire series plots as coherent and continuous trends on variation diagrams involving major and trace elements, and the trends are distinct from those of geographicallyassociated rocks of other suites. We interpret these and other geochemical variations to indicate that the rocks are comagmatic. Mineral chemistry, Sr isotopic data, and REE modelling support this interpretation.Least squares calculations show that the major element variations are consistent with formation of the basaltic andesite to rhyolite series by crystal fractionation of observed phenocryst phases in approximate modal proportions. In addition, calculations modelling the behavior of Sr with the incompatible trace element Th favor a fractional crystallization origin over a crustal anatexis origin for the rock series. The fractionating minerals included plagioclase (> 50%), and lesser amounts of Fe-Ti oxides, pyroxenes, and/or hornblende. The voluminous ignimbrites represent no more than 20% of the original mass of a mantle-derived mafic parental magma.     

Geologic sources and geographic distribution of sand tempers in prehistoric potsherds from the Mariana Islands

Temper sands in prehistoric potsherds of the Mariana Islands include terrigenous detritus derived from Paleogene volcanic bedrock and calcareous grains derived chiefly from modern fringing reefs, but also in part from uplifted Neogene limestones overlying volcanic bedrock. Calcareous sands are nondiagnostic of island of origin, but volcanic sands and the terrigenous component of hybrid sands composed of mixed terrigenous and calcareous grain types can be traced to geologic sources on Saipan and Guam, the only occupied islands where volcanic bedrock is extensively exposed. Quartzose tempers of several types were derived exclusively from dacitic volcanic rocks on Saipan. Nonquartzose tempers of andesitic parentage derive from both Saipan and Guam, but abundance of orthopyroxene as well as clinopyroxene is diagnostic of Saipan andesitic tempers, the presence of olivine is diagnostic of selected tempers from Guam, and placer temper sands rich in heavy ferromagnesian minerals occur only in sherds on Guam. Temper analysis documents widespread ceramic transfer from Saipan to other islands throughout Mariana prehistory, and more restricted ceramic transfer from Guam to nearby Rota, although the origin of some andesitic temper types is petrographically indeterminate. © 2001 John Wiley & Sons, Inc.     

Diel variation of selenium and arsenic in a wetland of the Great Salt Lake, Utah

Diel (24-h) changes in Se and As concentrations in a freshwater wetland pond bordering the Great Salt Lake (GSL) were examined. Selenium concentrations (filtered and unfiltered) changed on a diel basis, i.e., were depleted during early morning and enriched during daytime over August 17-18. During the May 24-25, 2006 and September 29-30 diel studies, no significant 24-h trends were observed in Se concentrations compared to August, which showed daily maximums up to 59% greater than the daily minimum. Both filtered and unfiltered As concentrations also varied on a diel cycle, with increased concentrations during early morning and decreased concentrations during daytime. Filtered As concentrations increased 110% during the May 24-25, 2006 diel study. Selenium varied in phase with pH, dissolved O₂ (DO), and water temperature (T_w) whereas As varied opposite to Se, pH, DO and T_w. Changes in pH, DO and T_w showed a direct linear correlation (r = 0.74, 0.75, and 0.55, respectively) to filtered Se. Also pH, DO and T_w were inversely correlated to filtered As concentration (r = −0.88, −0.87, and −0.84, respectively). Equilibrium geochemical speciation and sorption models were used to examine the potential oxidation state changes in Se and As, and sorption and desorption reactions corresponding to the observed 24-h variations in pe and pH. In this wetland it was postulated that diel Se variation was driven by sorption and desorption due to photosynthesis-induced changes in pH and redox conditions. Diel variations of As were hypothesized to be linked to pH-driven sorption and desorption as well as co-precipitation and co-dissolution with mineral phases of Mn.     

Some approaches for location of centroids of quartz grain outlines to increase homology between Fourier amplitude spectra

The ability to test for similarities and differences among families of shapes by closed-form Fourier expansion is greatly enhanced by the concept of homology. Underlying this concept is the assumption that each term of a Fourier series, when compared to the same term in another series, represents the same thing. A method that ensures homology is one which minimizes the centering error, as reflected in the first harmonic term of the Fourier expansion. The problem is to chose a set of edge points derived from a much larger, but variable, number of edge points such that a valid homologous Fourier series can be calculated. Methods are reviewed and criteria given to define a proper solution. An algorithm is presented which takes advantage of the fact that minimization of the error term can be accomplished by minimizing the distance between the origin of the polar coordinate system in the calculation of the Fourier series and the shape centroid. The use of this algorithm has produced higher quality solutions for quartz grain provenance studies.     

Characterization of permineralized kerogen from an Eocene fossil fern

The processes of organic maturation that occur during the permineralization of fossils and the detailed chemistry of the resulting products are incompletely understood. Primary among such processes is the geochemical alteration of biological matter to produce kerogen, such as that which comprises the cell walls of the fossils studied here: essentially unmetamorphosed, Eocene plant axes (specimens of the fossil fern Dennstaedtiopsis aerenchymata cellularly permineralized in cherts of the Clarno Formation of Oregon and the Allenby Formation of British Columbia). The composition and molecular structure of the kerogen that comprises the cell walls of such axes were analyzed using ultraviolet Raman spectroscopy (UV–Raman), solid state ¹³C nuclear magnetic resonance spectroscopy (¹³C NMR) and pyrolysis–gas chromatography–mass spectrometry (py–GC–MS).Cellularly well-preserved fern axes from both geologic units exhibit similar overall molecular structure, being composed primarily of networks of aromatic rings and polyene chains that, unlike more mature kerogens, lack large polycyclic aromatic hydrocarbon (PAH) constituents. The cell walls of the Allenby Formation specimens are, however, less altered than those of the Clarno chert, exhibiting more prevalent oxygen-containing and alkyl functional groups and comprising a greater fraction of rock mass.The study represents the first demonstration of the effectiveness (and limitations) of the combined use of UV–Raman, ¹³C NMR and py–GC–MS for the analysis of the kerogenous cell walls of chert-permineralized vascular plants.