东海西北部水团分析及与渔场的关系

作者用聚类分析法划分浅海水团,目的在于克服大洋水团分析法进行分析所遇到的一些困难,它在根据不同海区特点确定临界值与检验值时有较大的灵活性。本文讨论了浅海变性水团与中心渔场的关系。结果表明,东海底层冷水、东海表层水和大陆沿岸水对渔业生产有重要影响。     

Sediment Transport in Rivers and Coastal Waters

Following Bagnold's approach, a relationship between sediment transport and energy dissipation is developed. The major assumption made in the study is that the near bed velocity plays a dominant role in the process of sediment transport. A general relationship between energy dissipation and sediment transport is first proposed. Then the equations for total sediment transport are derived by introducing the appropriate expression of energy dissipation rate under different conditions, such as open channel flows, combination of wave and current, as well as longshore sediment transport. Within the flows investigated, the derived relationships are fairly consistent with the available data over a wide range of conditions.     

半潜式超大浮体连接器动力特性的一种时间序列分析方法

根据刚性模块弹性连接器 (RMFC)假设研究由 3个模块连接而成的半潜式超大浮体MobileOffshoreBase(MOB)的波浪载荷动力响应。模块和连接器动力响应根据时间序列法计算 ,这种方法包括海况模拟 ,波浪载荷计算和结构响应计算三个主要部分。通过对结构的适当简化 ,根据Airy波理论 ,Morrison公式以及流体中的结构运动方程、弹性连接器变形方程 ,计算求得MOB在不规则海况下的动力响应 ,并将其与相关文献中的结果进行比较 ,表明该方法有良好的精确性     

海洋走航式单边连续观测地震折射波Δt解释方法--1种新的浅层折射单支时距曲线解释方法

在浅层工程折射地震测量中 ,通常采用相遇观测系统采集数据和相应的解释方法进行解释 ;对于单边观测采集方法由于与其相应的解释方法较少而少被采用。本文提出 1种方法简单、精度可靠、可直接利用同一点相邻 2排列 2次观测的初至折射时间并适合于海洋走航式单边连续观测系统的折射初至资料解释方法。其精度基本与同观测段的采用相遇观测的差异时距方法解释的精度十分接近。该方法即适合于人工解释又适合于计算机自动解释。     

不同季节的企鹅珍珠贝游离珠植核效果比较

在雷州流沙港湛江海洋大学珍珠研究室实验基地分别于春、夏和秋季进行了企鹅珍珠贝游离珠植核实验。其中，春季插核的死亡率最低，为15.1％--16．2％，留核率最高，为10％左右：而夏季插核的死亡率最高，为63．56％，留核率也仅为2．22％：秋季插核的留核率最低，仅收珠1颗，留核率为0．35％，死亡率也较高，为54.4％。结果表明，春季是企鹅珍珠贝较适宜的插核季节。     

中华绒螯蟹人工半咸水工厂化育苗试验研究报告

在盐度为14—19‰的人工海水中,温度20—25℃条件下,189只平均体重100g的抱卵亲蟹产蚤状幼体4025万只。布苗密度为50—100万只/m~3为宜。必须经常换水,保持水质良好。人工饵料以单胞藻和丰年虫无节幼体为主,可适当加喂蛋黄。     

On dynamic coupling effects between a spar and its mooring lines

The responses of a spar constrained by slack mooring lines to steep ocean waves and tensions in the mooring lines are simulated using two different numerical schemes: a quasi-static approach (SMACOS) and a coupled dynamic approach (COUPLE). The two approaches are the same in computing wave loads on the structure. Their difference is in modeling dynamic forces of mooring lines; that is the dynamic forces are included in the computation of COUPLE but neglected in SMACOS. The numerical simulation is examined against the laboratory measurements of the JIP Spar in a water depth of 318 m. The dynamic coupling effects between the JIP Spar and its mooring lines in different water depths (318, 618 and 1018 m) are investigated by the comparison of numerical simulations obtained using the quasi-static and coupled dynamic approaches. It is found that the damping of mooring lines reduces the slow-drift surge and pitch of the Spar, especially in deep water. The reduction in the amplitude of slow-drift surge can reach about 10% in a water depth of 1018 m. The tension in mooring lines may greatly increase in the wave frequency range when dynamic forces in mooring lines are considered. The mooring-line tension in the wave frequency range predicted by the coupled dynamic approach can be eight times as great as the corresponding prediction by the quasi-static approach in a water depth of 1018 m. This finding may have important implications for the estimation of the fatigue strength and life span of the mooring lines deployed in deep water oceans.     

Parameterization of Wave Breaking Probability and Whitecap Coverage

1 .Introduction Wave breaking and associated whitecapping have long beeninteresting due totheir close relationto many fields of ocean study,including air-sea interaction,remote sensing,ocean engineering,aswell as wave dynamics .The breaking probabilityBan…     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.     

度量泥炭腐殖化度的一种简便方法:泥炭灰度

介绍了一种度量泥炭腐殖化程度简便易得的指标——灰度。通过将同一剖面灰度测量结果与传统的腐殖化度测量结果进行对比，发现二者的变化具有较强的相关性，说明导致二者变化的因素大致相同。泥炭赋色物质鉴定的实验表明腐殖质含量变化是引起灰度在剖面上变化的原因，从而进一步论证了用灰度值作为泥炭腐殖化程度指标的可行性。