Flows,flares, and formation of umbrae and light bridges in BBSO region No. 1167

We present high-resolution observations of the large active region BBSO No. 1167 (Boulder No. 5060) which cast new light on the structure of sunspot regions. We obtained excellent data, highlighted by videomagnetograms (VMG) obtained with our 65-cm telescope, which give unprecedented spatial resolution, about 0.5' for much of two 11-hr periods. This permitted us to see details of the field evolution and flows in the AR. The H filtergrams and D3 filtergrams permit study of these magnetic changes compared to spots and chromospheric structure.The region was a huge but simple active region (CMP July 2, 1988) in which we observed rapid flux emergence for several days. Because the new flux generally matched the old, there were few large flares. However, there were 14 flares on June 28 and 29, mostly in two sites. The first site was a spot which already existed when the active region appeared on the east limb. This site showed little change of magnetic structure during our observing period. The second site is an area disturbed by new flux emergence, which included a spot which formed and disappeared in two days, and a rapidly moving p spot. Flares ocurring at one site almost always produced footpoints at the other. The delay between flash phases of the same flare at the two sites ranges from 40 to 160 s.The magnetograms show complex fine structure, with some closely interwined regions of opposite polarity. In a region of new flux emergence, positive (leading polarity) flux flows along elongated channels immersed in the negative flux. Moving magnetic features occur around all of the spots.We point out other interesting aspects of this large region: (1) While there is extensive penumbra around the main umbrae, there is also significant penumbra apparently unrelated to any spot. These unusual penumbrae are either due to flux returning to the surface, flux left behind by the moving umbra, or associated with pores that appear and disappear. (2) We observed umbrae to move faster than the accompanying penumbrae, and concluded that penumbrae are not a simple extension of the umbra. (3) We found that combining spots of the same polarity do not completely merge, but are always separated by a thin light bridge. This means that the emerging flux loops are discrete entities.     

饱和软土压缩曲线的“反常”现象

饱和软土压缩试验时,经常出现压缩曲线“反常”、压缩系数“倒大”的现象。它是土的原始结构发生破坏前后的不同压缩性的客观反映。饱和软土的结构力很微弱,唯质量好的原状土才能见到这种“反常”。应从成孔、取样、测试及资料整理等多个环节保证其工程意义。     

云南大地热流及地热地质问题

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

Effect of some additives on synthesis of zeolite from coal fly ash

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.     

The Wuchiapingian–Changhsingian boundary (Upper Permian) at Meishan of Changxing County, South China

Section D at Meishan, Changxing County in the Zhejiang Province, China, has been extensively studied in various aspects of the stratigraphy during the past 20 years. It was ratified by the International Union of Geological Sciences (IUGS) as the Global Standard Stratotype Section and Point (GSSP) for the Permian–Triassic boundary in 2000, and is also a potential stratotype for the Wuchiapingian–Changhsingian boundary. However, the contact relationship between the Longtan (Wuchiapingian) and Changxing (Chainghsingian) formations has been a controversial subject for years. Recent studies on Section C, about 300 m west of Section D, at Meishan confirm a complete depositional succession around the boundary and suggest that the proposed boundary level, the FAD of Clarkina wangi within the lineage from C. longicuspidata to C. wangi, is consistent with the first appearance of the index Changhsingian fusulinid Palaeofusulina sinensis and tapashanitid ammonoids.     

Production of carbonate and silica nano-particles in stirred bead milling

This paper presents the experimental results of the mechanical production of silica and carbonate colloidal particles below 100 nm using two types of stirred bead mills (i.e., DCP Superflow 12 and PML H/V). It is shown that the stirred bead mill with very small beads can be used as an efficient equipment for the production of the colloidal particles in nanoscale from the feed materials of several microns in sizes at high energy consumptions. The DCP Superflow mill with high power densities is superior for the effective size reduction and production rate, compared to the conventional PML H/V mill with lower power densities. The smaller particles could be produced by the DCP Superflow mill at the same level of high energy inputs as from the PML H/V mill. The “grinding limit” for the processes in the mills has been discussed.     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

Characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems in the North China coal basin

A conceptual framework for characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems is presented, based on the features of the site conditions and analyses of the water bursting and mine inundation events of the North China coal basin. Comprehensive analyses of the hydrogeological conditions for establishment of the three-dimensional groundwater flow systems of the North China coal basin revealed different vertical hydraulic connection paths or channels. These connections include karst collapse columns, fault or fracture zones, buried weathering zones, and fracture networks in aquitards, within the multilayered groundwater flow systems. Also examined, was the effect of the primary features of the flow system and those different connection paths on water bursting and discharge into the underground coal mines. It was demonstrated that appropriately identifying and adequately understanding the three-dimensional multilayered groundwater flow systems and those various vertical hydraulic connection mechanisms are critical for appropriately preventing water bursting hazards and predicting water discharge into underground mines. A valuable guideline is presented on characterization of water bursting and discharge into underground mines with multilayered groundwater flow systems.

---

Resumen Un cadre de travail conceptuel pour la caractérisation du jaillissement et de la vidange des eaux dans les mines à plusieurs niveaux d'écoulement est présenté, basé sur les conditions et l'analyse sur site du jaillissement des eaux et des inondations dans les bassins charbonneux du Nord de la Chine. L'analyse compréhensive des conditions hydrogéologiques des systèmes d'écoulement tridimensionnel de ces bassins, révèle des trajets ou des chenaux qui sont autant de connections hydrauliques verticales. Ces connections comprennent des effondrement karstiques en colonne, des zones de fractures et de failles, des zones d'altération, des réseaux de fractures dans les aquitards, dans le système hydrogéologique multicouche. L'influence des caractéristiques primaires du système d'écoulement et de ces différentes connections sur le jaillissement et la vidange dans les mines, est également examiné. Il a été démontré que l'identification appropriée et la compréhension adéquate du système d'écoulement souterrain multicouche et tridimensionnel, et des mécanismes variés de connection hydraulique verticale est critiquée pour prévenir de manière appropriée les risques de jaillissement et de vidange dans les mines. Des guidelines valorisables sont présentées, pour la caractérisation du jaillissement et de la vidange dans de tels systèmes.

---

Résumé Se presenta un marco conceptual para la de caracterización de la despresurización y descarga de agua a minas subterráneas con sistemas de acuíferos de múltiples niveles, el cual se basa en las condiciones del sitio, análisis de la despresurización de agua e inundaciones de minas en la cuenca de carbón del norte de la China.Un análisis comprehensivo de las condiciones hidrogeológicas para el establecimiento de los sistemas de flujo de agua de tri-dimensionales en la cuenca de carbón del norte de la China ha revelado diferentes canales hidráulicos verticales. Estas conexiones incluyen columnas de karst colapsadas, fallas o zonas de fracturas, zonas de regalita hundida y redes de fracturas en zonas de poca permeabilidad dentro de los sistemas de flujo de múltiples niveles.También se investigó el efecto de los rasgos primarios del sistema de flujo y los diferentes canales conectivos sobre la despresurización y descarga de agua a minas subterráneas. Se demostró que el entendimiento e identificación adecuada de los sistemas de acuíferos de múltiples niveles en tres dimensiones es crítico para prevenir apropiadamente la despresurización y descarga de agua a minas subterráneas. Se presentan lineamientos valiosos en relación con la despresurización y descarga de agua a minas subterráneas en sistemas de flujo de múltiple nivel.

     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.