面向"数字地球"的岩石层三维成像

在上前主要是基于大地测量信息和卫星遥感信息而建立的“数字地球”的框架构想中,显然没有考虑到地人部的三维结构及其随时间的变化,但是另一方面,要真正实现“数字地球”构想中的模拟和预测的功能,这必不可少的。以“数字地球”为考虑问题的参考系,对地观测的分辨本领问题具有特别重要的意义。近年来,随着以高的基础的地震学的发展使面向“数字地球”的岩石层三维成像成为可能,进行千米精度的探测和年尺度的监视,并将这些信     

Research on the panel adjustment method of an active main reflector for a large radio telescope

The surface accuracy of a large parabolic antenna is an important indicator to evaluate the quality of the antenna.It not only directly affects the antenna’s aperture efficiency,thereby determining the shortest wavelength that the antenna can work,but also affects the main lobe width and side lobe structure of the antenna pattern.Microwave holography is an important method for parabolic antenna profile detection.In this article we adopt a new algorithm to adjust the panels for the large radio telescope with an active main reflector through the TM65 m antenna’s aperture phase profile.The panels of the TM65 m radio telescope is in a radial pattern with 14 rings.Each corner of the panel is fixed on the screw of the actuator to move up and down,and the adjacent corners of the four panels share an actuator.We use the method of plane fitting to calculate the adjustment value of every panel’s corner.But one actuator,which simultaneously controls the common corner of the adjacent panels,will have different adjustment values according to the different plane fitting equation based on adjacent panels.In this paper,the adjustment value of the adjacent panels’crosspoints are constrained to be equal to the constraint condition to calculate each actuator’s adjustment value of the TM65 m radio telescope.Through multiple adjustments and application of the new algorithms,the accuracy of the TM65 m antenna reflector profile has been improved from the original 0.28 mm to the current 0.19 mm.     

A simplified method for analyzing the fundamental frequency of monopile supported offshore wind turbine system design

Preliminary design of offshore wind turbines requires high precision simplified methods for the analysis of the system fundamental frequency. Based on the Rayleigh method and Lagrange's Equation, this study establishes a simple formula for the analysis of system fundamental frequency in the preliminary design of an offshore wind turbine with a monopile foundation. This method takes into consideration the variation of cross-section geometry of the wind turbine tower along its length, with the inertia moment and distributed mass both changing with diameter. Also the rotational flexibility of the monopile foundation is mainly considered. The rigid pile and elastic middle long pile are calculated separately. The method is validated against both FEM analysis cases and field measurements, showing good agreement. The method is then used in a parametric study, showing that the tower length Lt, tower base diameter d0, tower wall thickness δt, pile diameter db and pile length Lb are the major factors influencing the fundamental frequency of the offshore wind turbine system. In the design of offshore wind turbine systems, these five parameters should be adjusted comprehensively. The seabed soil condition also needs to be carefully considered for soft clay and loose sand.     

一个湍能封闭模型对风暴潮海底底应力的应用研究

将一个三维湍能封闭模型应用于开阔海区的风暴潮，通过数值计算探讨了Ｔａｙｌｏｒ底摩擦二次率的拖曳系数随空间的分布及拖曳系数与水深、海底粗糙度、风向和风速等因素的关系。本文对底摩擦二次率的可靠性做了评价。     

A Note on Reviving the Goddard Satellite-Based Surface Turbulent Fluxes （GSSTF） Dataset

Accurate sea surface flux measurements are crucial for understanding the global water and energy cycles. The oceanic evaporation, which is a major component of the global oceanic fresh water flux, is useful for predicting oceanic circulation and transport. The global Goddard Satellite-based Surface Turbulent Fluxes Version-2 (GSSTF2; July 1987--December 2000) dateset that was officially released in 2001 has been widely used by scientific community for global energy and water cycle research, and regional and short period data analyses. We have recently been funded by NASA to resume processing the GSSTF dataset with an objective of continually producing a uniform dataset of sea surface turbulent fluxes, derived from remote sensing data. The dataset is to be reprocessed and brought up-to-date (GSSTF2b) using improved input datasets such as a recently upgraded NCEP/DOE sea surface temperature reanalysis, and an upgraded surface wind and microwave brightness temperature V6 dataset (Version 6) from the Special Sensor Microwave Imager (SSM/I) produced by Remote Sensing Systems (RSS). A second new product (GSSTF3) is further proposed with a finer temporal (12-h) and spatial (0.25^ox0.25^o) resolution. GSSTF2b (July 1987--December 2008) and GSSTF3 (July 1999--December 2009) will be released for the research community to use by late 2009 and early 2011, respectively.     

湘鄂赣二叠纪岩相古地理研究

湘鄂赣二叠纪沉积盆地是在华南陆块基础上发育而成,具有扬子克拉通北缘被动大陆边缘盆地、扬子克拉通盆地、湘赣板内拉张盆地和华夏克拉通边缘盆地等四类。根据古暴露等标志,建立了各类盆地的沉积层序,并进行了区域对比。在此基础上,本文着重运用层序地层编图法编制了湘鄂赣二叠纪岩相古地理图,深化了该区岩相古地理研究,详细建立了沉积体系域模式和岩相古地理演化特点和控制因素。     

地面总辐射的异常减少对气候影响的数值试验

在与实际台风场近似一致的环境流场条件下，应用柱会标中的正压无辐散模式，讨论了台风中扰动的稳定性问题。研究表明，台风暖心结构的台风外围适当强度的冷空气活动有利限台风中扰动发展，且台风愈强，台风中扰动愈易发展。     

青藏高原净生态系统碳交换量的遥感评估模型研究

青藏高原作为世界海拔最高的区域,是全球气候变化的敏感区之一。定量估算这一区域的净生态系统碳交换量（NEE）有利于理解陆地生态系统碳平衡对未来气候变化的响应。本文构建了一个模拟该地区NEE动态变化的净碳收支模型（NCBM）。该模型由来源于MODIS影像的增强型植被指数（EVI）、陆地表面水分指数（LSWI）以及来源于地面观测的空气温度和短波辐射共同驱动,并利用青藏高原地区的3种植被类型（包括高寒灌丛、高寒湿地和高寒草甸）的碳通量长期观测数据对模型进行了校准和验证。结果表明,在模型校准站点年,NCBM模型可以模拟NEE观测值81%的变化,均方根误差（RMSE）为0.03molC/m2/d,模型效率（EF）为0.81。在模型验证站点年,NCBM模型可以预测NEE观测值84%的变化,RMSE为0.03molC/m2/d,EF为0.81。在大多数情况下,NCBM模型可以清晰地模拟各植被类型的NEE季节和年际变化。此外,NCBM模型因为结构简单,模型驱动变量易于获取等优势,具有在区域尺度上模拟NEE时空变化的潜力。但是该模型还需要进一步的改进和发展,特别需要提高对植被非常稀疏地区NEE变化的模拟能力。     

豫皖交界“梅山群”的古构造环境研究及其意义

摘要：“梅山群”是豫皖交界地段变质程度与佛子岭群、石炭系不同的变质岩系。它主要由斜长角闪岩、变粒岩、浅粒岩、云英片岩、角闪片岩、黑云片岩、大理岩和辉石岩等组成,在区域上可以和商城群歪庙组对比,形成时代为早古生代．对“梅山群”的岩石化学研究表明,其形成的古构造环境可能为弧后盆地。笔者认为早古生代,南北大陆板块构造的碰撞以华北板块仰冲、扬子板块俯冲为特征,大别造山带古缝合带的位置应在“梅山群”分布区域的南侧。