Long-term erosion on granitic roadcuts based on exposed tree roots

Exposed roots were used to estimate soil and bedrock erosion on the cut slopes of a 45-year-old road constructed in granitic soils of the Idaho Batholith. The original roadcut surface was defined by projecting a straight line from the toe of the cut past the end of the exposed root to the intersection of a straight line projected along the surface of the hillslope. A cross-sectioning technique was then used to determine erosion to the present roadcut surface. A total of 41 exposed root sites were used to estimate erosion on a 1350 m-long section of road. Average erosion was 1·0 and 1·1 cm/year for soil and bedrock respectively. Buttressing by tree roots caused lower erosion rates for soil as compared to bedrock. Both soil and bedrock erosion rates showed statistically significant correlations with the gradients of the original cut slope. The bedrock erosion data provide a reasonable estimate of the disintegration rate of exposed granitic bedrock exhibiting the weathering and fracturing properties common to this area. The road is located in a study watershed where long-term sediment yield data are available. Sediment data from adjacent study watersheds with no roads were compared to sediment data from the roaded watershed to estimate the long-term increase in sediment yield caused by the road. The increase amounts to about 2·4 m³/year. This figure, compared to the average annual on-site road erosion, provides an erosion to sediment delivery ratio of less than 10 per cent. Based on study results, road construction and maintenance practices are suggested for helping reduce roadcut erosion.     

Observations of mine seismicity in the eastern Wasatch Plateau,Utah, U.S.A.: A possible case of implosional failure

In the summer of 1984, a three-dimensional, high-resolution microearthquake network was operated in the vicinity of two coal mines beneath Gentry Mountain in the eastern Wasatch Plateau, Utah. During a six-week period, approximately 3,000 seismic events were observed of which the majority were impulsive, higher frequency (>10 Hz), short duration (<2–3 sec) events probably associated with the caving of the roof from a longwall operation. In contrast, 234 of the largest located events appeared to occur predominantlybeneath the mines to a depth of 2 to 3 km consistent with previous studies. The magnitudes of these events ranged from less thanM _c 0 to 1.6. In addition to the unusual depths of these latter events, an anomalous aspect displayed by the events was an apparent dilatational focal mechanism suggesting a non-double-couple, possibly implosional source. Implosional events have been observed in other studies of mine seismicity; however, the generally inadequate instrumental coverage of the focal sphere has cast some doubt on the validity of such mechanisms. Previously suggested source mechanisms for such implosional events have included tensional failure through strata collapse, and a shear-implosional displacement mechanism. Shear failure must be involved in the failure process of the Gentry Mountain implosional events as evidenced by well-defined shear waves in the observed seismograms. Simultaneous monitoring in the East Mountain coal mining area to the south by the University of Utah revealed typical shear failure events mixed with implosional events. The observed double-couple, reverse focal mechanisms at East Mountain were similar to mechanisms determined in previous studies and a composite focal mechanism determined in this study for a sequence outside the mining areas. This suggested that the shear events within the mining areas are being influenced by the regional tectonic stress field. Thus in addition to the seismic events associated with caving of the roof from the longwall operation, there appear to be at least two other types of mining-induced seismic events occurring in the eastern Wasatch Plateau, both submine in origin: (1) events characterized by apparent non-double-couple possibly implosional focal mechanisms and well-defined shear waves; and (2) shear events, which are indistinguishable from tectonic earthquakes and may be considered mining triggered earthquakes. The small mining-induced stress changes that occur beyond a few hundred meters from the mine workings suggest both types of seismic events are occurring on critically stressed, pre-existing zones of weakness. Topography, overburden, method of mining, and mine configuration also appear to be significant factors influencing the occurrence of the implosional submine events.     

The capture efficiency map: the capture zone under time-varying flow

The capture zone or contributing area of a ground water extraction well can be defined as that portion of the aquifer from which the well draws its water. Accurate delineation of capture zones is important in many ground water remediation applications and in the definition of wellhead protection areas. Their mathematical delineation is often simplified by using quasi-steady-state models based on time-weighted average pumping rates and background hydraulic gradients. We present a new semianalytic approach for the definition of capture zones under transient-flow conditions. We then use this approach to evaluate the effects of time variations in the direction of the background hydraulic gradient on capture. Results are presented in the form of capture efficiency maps (CEMs). Although the area contributing to a given well is found to generally expand relative to the steady-state average capture zone when the gradient direction varies, the zone of 100% capture may expand or contract depending on site-specific conditions. We illustrate our CEM approach by applying it to the design of a plume containment system.     

What controls levels of dissolved phosphate and ammonium in surface waters?

Dissolved inorganic nutrient pools are small relative to particulate pools, and dissolved pools turnover rapidly. It has been observed that pools change little from day to day on the sampling scales usually employed. A simple model is presented where uptake and regeneration rates balance to cause a local steady state concentration for dissolved inorganic nutrients. Enrichment and dilution perturbation experiments with lake water support the idea of steady state nutrient concentrations. Although inorganic nutrient concentrations are often controlled by biota, the absolute concentrations present tell little about the activity of that biota.     

Distribution and source of tar on the Pacific Ocean

Petroleum residues, or tar lumps, are concentrated in the northwestern portion of the Pacific Ocean, particularly in the Kuroshio current system. The source of the tar appears to be tank washings from tankers on the very large Middle East to Japan route. Tar pollutants apparently are discharged by tankers south of Japan, become entrained in the Kuroshio current, and create a plume of contamination which extends downstream for 7000 km across the Pacific.     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.     

Surveillance for previously unmonitored organic contaminants in the San Francisco Estuary

The San Francisco Estuary Regional Monitoring Program initiated surveillance monitoring to identify previously unmonitored synthetic organic contaminants in the San Francisco Estuary. Organic extracts of water samples were analyzed using gas chromatography-mass spectrometry in full scan mode. The major contaminant classes identified in the samples were fire retardants, pesticides, personal care product ingredients, and plasticizers. Evidence from the literature suggests that some of these contaminants can persist in the environment, induce toxicity, and accumulate in marine biota and in higher food chain consumers. The major sources of these contaminants into the marine environment are the discharge of municipal and industrial wastewater effluents, urban stormwater, and agricultural runoff. As a proactive effort, it is suggested that surveillance studies be used routinely in monitoring programs to identify and prevent potential problem contaminants from harming the marine environment.     

Über die Bestimmung von Differenzen der Lotrichtung mit Hilfe des GradientenU zzs

Zusammenfassung R. v. Eötvös hat für die Bestimmung von Lotrichtungsdifferenzen mit seiner Drehwaage zwei Verfahren angegeben, die aber nur unter Hinzuziehung astronomisch-geodätischer Messungen zum Ziel führen. Beide Verfahren sind sehr umständlich, und in der einschlägigen Literatur finden sich keine Hinweise, daß eines der genannten Verfahren seitEötvös nochmals angewandt wurde. — In Freiburg i. Br. wird zur Zeit eine Drehwaage erprobt, mit der voraussichtlich die direkte Messung des GradientenU _zzs möglich sein wird. Es soll nun gezeigt werden, daß die Bestimmung der Lotrichtungsdifferenz zweier Feldpunkte mit Hilfe dieser Größe, ohne Zuhilfenahme von astronomisch-geodätischen Messungen, möglich ist.

---

Summary R. v. Eötvös has showed two methods for the measurement of differences between vertical lines with his torsion-balance. Both methods are only applicable, if they are connected with astronomic and geodetic measurements, and they are very troublesome. In the special publications are no remarks, that one of these methods everytime has been applied since the measurement ofEötvös. —At Freiburg i. Br. (Western Germany) now a new torsion-balance is built, with which foreseeable the direct measurement of the gradientU _zzs will be possible. In the following publication will be demonstrated, that the fixation of differences between the vertical lines of two points of the gravity field of the earth is possible with this gradientU _zzs without astronomic and geodetic measurements.

     

Die atlantischen Ankerstationen des „Armauer Hansen“ im Jahre 1930 in der Bearbeitung von V. W. Ekman

Summary The main subject of Ekman's most careful and detailed analysis of the current measurements of Armauer Hansen is to elucidate the periodical character of ocean currents. A survey of his results is given in table 2 and by means of an outline chartlet a comparison is made between the values which are derived from the observations on board Armauer Hansen and those attained by the reviewer by numerical calculation.

---

Les observations faites à bord du navire Armauer Hansen en 1930 à ses mouillages dans l'Atlantique et leur exploitation par V. W. Ekman

Résumé Le but principal de V. W. Ekman dans son analyse scrupuleuse et détaillée des mesures de courant est d'élucider le caractère periodique des courants océaniques. Les résultats les plus importants en sont donnés dans la table 2; en outre le rapporteur compare ces résultats empiriques d'Ekman avec ses propres calculs numériques en les confrontant dans une petite carte.

---

---

V. W. Ekmann, Studies on Ocean Currents. Geofysiske Publikasjoner Vol. XIX, No. 1, Bergen 1953.