Quaternary vegetation changes derived from a loess‐like permafrost palaeosol sequence in northeast Siberia using alkane biomarker and pollen analyses

Zech, M., Andreev, A., Zech, R., Müller, S., Hambach, U., Frechen, M. & Zech, W.: Quaternary vegetation changes derived from a loess‐like permafrost palaeosol sequence in northeast Siberia using alkane biomarker and pollen analyses. Boreas, Vol. 39, pp. 540–550. 10.1111/j.1502‐3885.2009.00132.x. ISSN 0300‐9483 Alkane biomarker and pollen data were obtained from a 15‐m‐high and probably c. 240‐kyr‐old loess‐like permafrost palaeosol sequence (‘Tumara Palaeosol Sequence’, TPS) in northeast Siberia. The alkane results were corrected for degradation effects by applying an end‐member model and were evaluated by comparing them with the palynological results. The two data sets are generally in good agreement and suggest that the lower part of the TPS developed mainly under larch forests, whereas the upper part of the sequence reflects the expansion of mammoth steppes during the Weichselian glaciation and finally reforestation during the Lateglacial and the early Holocene. For the lower part of the TPS, the palaeoclimatic interpretation according to modern analogue methods would indicate warm, interglacial conditions, but this is at odds with the climate chronostratigraphy based on a multi‐proxy palaeopedological approach and numeric dating. Provided that the correlation of the discussed stratigraphic unit with the Late Saalian glaciation and the Marine Oxygen Isotope Stage 6 is correct, our results suggest that temperature was not a limiting factor for tree growth at that time. Furthermore, it seems very likely that it was not mainly temperature changes but rather increasing aridity and continentality during the course of the last glacial that favoured the expansion of the mammoth steppe.     

Carbonate platforms in the Dolomites area of the Southern Alps – historic perspectives on progress in sedimentology

The area of the Dolomites in the Southern Alps exhibits some of the best outcrops of carbonate platforms and platform-to-basin transitions in the world. The region has attracted geologists since the early 19th Century and has been a centre of stratigraphic and sedimentological research ever since. The interpretation of the platforms in the Dolomites as coral reefs dates back to the 1850s and was inspired by the work on modern reefs in the Pacific and Indian Oceans at that time. Very soon, however, studies in the Dolomites triggered developments of their own. Fieldwork on these Triassic atolls led to a first understanding of the dramatic facies changes at the periphery of reefs and atolls, including the recognition of slope facies and basinward transport of platform material by gravity. In addition, the platforms were used to prove long-term syndepositional subsidence on the scale of kilometres as early as 1860. After World War II, the study of modern reefs and platforms led to process-based facies models and this, in turn, guided the sedimentological analysis of the Alpine–Mediterranean belt. Repeatedly, however, the roles became reversed and the Alpine–Mediterranean platforms contributed to the fundamental underpinnings of sedimentology. In the 1980s, mountain-size outcrops in the Alps and the Apennines were recognized as models for the interpretation of shoal-water carbonates in seismic data. Seismic models of outcrops in the Dolomites, for instance, gave rise to the concept of pseudo-unconformities, i.e. rapid lateral facies changes that appear as unconformities in seismic images. In the 1990s, the Alpine–Mediterranean Mesozoic along with the North American and European Palaeozoic revealed the significance of microbially induced carbonate precipitation in constructing large limestone bodies. Studies of ancient rocks led this development because this particular carbonate factory is far less prominent now than it was at certain times in the past.     

The Concentration of the Platinum-Group Elements in South African Komatiites: Implications for Mantle Sources, Melting Regime and PGE Fractionation during Crystallization

We have analysed 18 samples of komatiite from five consecutivelava flows of the Komati Formation at Spinifex Creek, BarbertonMountain Land. Our samples include massive komatiite, varioustypes of spinifex-textured komatiite, and flow-top breccias.The rocks have low platinum-group element (PGE) contents andPd/Ir ratios relative to komatiites from elsewhere, at 0·45–2ppb Os, 1–1·4 ppb Ir, <1–5 ppb Ru, 0·33–0·79ppb Rh, 1·7–6 ppb Pt, 1·6–6·1ppb Pd, and Pd/Ir 3·3. Pt/Pd ratios are c. 1·1.Platinum-group elements are depleted relative to Cu (Cu/Pd =15 300). They display a tendency to increase in the less magnesiansamples, suggesting that the magmas were S-undersaturated uponeruption and that all PGE were incompatible with respect tocrystallizing olivine. Komatiites from the Westonaria Formationof the Ventersdorp Supergroup and the Roodekrans Complex nearJohannesburg have broadly similar PGE patterns and concentrationsto the Komati rocks, suggesting that the PGE contents of SouthAfrican ultrabasic magmas are controlled by similar processesduring partial mantle melting and low-P magmatic crystallization.Most workers believe that the Barberton komatiites formed byrelatively moderate-degree batch melting of the mantle at highpressure. Based on the concentration of Zr in the Komati samples,we estimate that the degree of partial melting was between 26and 33%. We suggest that the low PGE contents and Pd/Ir ratiosof all analysed South African komatiites are the result of sulphideshaving been retained in the mantle source during partial melting.The difference in Pd/Ir between our samples and Al-undepletedkomatiites from elsewhere further suggests that the PGE arefractionated during progressive partial melting of the mantle.Thus, our data are in agreement with other recent studies showingthat the PGE are hosted by different phases in the mantle, withPd being concentrated by interstitial Cu-rich sulphide, andthe IPGE (Os, Ir, Ru) and Rh resting in monosulphide solid solutionincluded within silicates. Pt is possibly controlled by a discreterefractory phase, as Pt/Pd ratios of most komatiites worldwideare sub-chondritic. KEY WORDS: platinum-group elements; komatiites; Barberton; mantle melting; South Africa     

Carbonate platform-to-basin correlation by means of grain-composition logs: an example from the Vercors (Cretaceous, SE France)

Quantitative logs of grain composition for several sections of platform top and flank of the Vercors carbonate platform (Early Cretaceous, SE France) provide platform-to-basin correlation with a resolution of a few metres over an area of 70 km². Grain composition was determined by point-counting thin sections. Point-count groups that characterize palaeoenvironmental realms (i.e. open sea, platform margin) were defined for the platform–basin trajectory. Grain-composition logs revealed marked peaks in the number of open-sea biota and peaks in ooid abundance. The peaks in open-sea biota correspond to back-stepping intervals and deepening upward facies successions at the platform margin. These peaks probably relate to incipient drowning of the platform and may be used to delineate marine-flooding surface-bounded sequences. Peaks in ooid occurrence show no relationship with the progradation, aggradation or retreat of the platform. Apparently, the oolitic sands were not part of a facies tract that shifted up and down the platform. Instead, they represent a depositional mode that was either on or off. Times of prolific ooid production and shedding probably occurred during wide but shallow submergence of the platform, accompanied by suitable water chemistry. Peaks in both ooids and open-sea biota are excellent markers for platform-to-basin correlation, as they are recorded in successions on the platform top as well as on the flank. Altogether, the grain-composition logs show that each of the lithologically rather similar platform tongues of the Vercors has a unique signature or compositional fingerprint. These compositional fingerprints are most helpful in evaluating the lateral extent of different stratigraphic units. In outcrops of the Vercors platform, the physical tracing of bedding surfaces delineate wedges of toe-of-slope sediments that show a conspicuous thinning towards the platform. However, our correlation shows that these sediment bodies are not truly basin-restricted wedges but have a platform top equivalent. This implies that these units were, at least partly, deposited during high stands of sea level that flooded the platform.     

Development of a technique to decompose heterogeneous mapping units in a categorical map of the biotic environment using correlated categorical data

In this article a technique is presented to estimate the proportions of different map categories in a series of heterogeneous mapping units, using information on the degree of spatial correlation with other categorical data. The technique has been applied to decompose ecotope complexes in a categorical map of the biotic environment in Flanders, using secondary information on land cover and soil type. Because the conditional probability of an ecotope occurring given a certain soil type depends on the frequency with which the ecotope occurs in an area, determining the probability of occurrence of an ecotope from the conditional probabilities can lead to predictions that contradict prior knowledge about the composition of the different mapping units. A measure expressing the affinity of an ecotope for a soil type is proposed and is used as an alternative to conditional probability in the estimation procedure. The proposed method has been tested in a study area for which detailed field observations were collected, and proves to work well if reliable a priori knowledge about the composition of complex mapping units is available.     

Glacially crushed quartz grains in loess as indicators of long-distance transport from major European ice centers during the Pleistocene

Detailed mineralogical analysis of the fine and very fine sand fractions (63–250) in the Dreihausen Loess Sequence shows the presence of numerous glacially crushed grains, including a significant amout of quartz. Previous theories regarding the origin of loesses in central Germany held that all sediments were derived locally, following short-distance transport from nearby sandstone outcrops. New data presented here show that many quartz and feldspar grains were glacially crushed, weathered, crushed again, transported, and emplaced by aeolian processes at Dreihausen. Crushing features observed are compatible with transport in both continental and alpine glaciers; some clasts show the effects of abrasion by both water and ice transport, while others are partly rounded presumably by fluvial and/or aeolian processes. Stronger palewind systems during the Pleistocene presumably contributed to the transport and emplacement of glacial grains from ice centers in both the Alps and the Baltic areas, and also possibly from the Rhine Basin.