Late Cretaceous reactivation of major crustal shear zones in northern Namibia: constraints from apatite fission track analysis

Namibia's passive continental margin records a long history of tectonic activity since the Proterozoic. The orogenic belt produced during the collision of the Congo and Kalahari Cratons in the Early Proterozoic led to a zone of crustal weakness, which became the preferred location for tectonism during the Phanerozoic. The Pan-African Damara mobile belt forms this intraplate boundary in Namibia and its tectonostratigraphic zones are defined by ductile shear zones, where the most prominent is described as the Omaruru Lineament–Waterberg Thrust (OML–WT). The prominance of the continental margin escarpment is diminished in the area of the Central and Northern Zone of the Damara belt where the shear zones are located. This area has been targeted with a set of 66 outcrop samples over a 550-km-long, 60-km-broad coast-parallel transect from the top of the escarpment in the south across the Damara sector to the Kamanjab Inlier in the north. Apatite fission track age and length data from all samples reveal a regionally consistent cooling event. Thermal histories derived by forward modelling bracket this phase of accelerated cooling in the Late Cretaceous. Maximum palaeotemperatures immediately prior to the onset of cooling range from ca. 120 to ca. 60 °C with the maximum occurring directly south of the Omaruru Lineament. Because different palaeotemperatures indicate different burial depth at a given time, the amount of denudation can be estimated and used to constrain vertical displacements of the continental crust. We interpret this cooling pattern as the geomorphic response to reactivation of basement structures caused by a change in spreading geometry in the South Atlantic and South West Indian Oceans.     

Neoproterozoic to Early Cambrian history of an active plate margin in the Teplá–Barrandian unit—a correlation of U–Pb isotopic-dilution-TIMS ages (Bohemia, Czech Republic)

The Teplá–Barrandian unit (TBU) of the Bohemian Massif shared a common geological history throughout the Neoproterozoic and Cambrian with the Avalonian–Cadomian terranes. The Neoproterozoic evolution of an active plate margin in the Teplá–Barrandian is similar to Avalonian rocks in Newfoundland, whereas the Cambrian transtension and related calc-alkaline plutons are reminiscent of the Cadomian Ossa–Morena Zone and the Armorican Massif in western Europe. The Neoproterozoic evolution of the Teplá–Barrandian unit fits well with that of the Lausitz area (Saxothuringian unit), but is significantly distinct from the history of the Moravo–Silesian unit.The oldest volcanic activity in the Bohemian Massif is dated at 609+17/−19 Ma (U–Pb upper intercept). Subduction-related volcanic rocks have been dated from 585±7 to 568±3 Ma (lower intercept, rhyolite boulders), which pre-dates the age of sedimentation of the Cadomian flysch ( t chovice Group). Accretion, uplift and erosion of the volcanic arc is documented by the Neoproterozoic Dob í conglomerate of the upper part of the flysch. The intrusion age of 541+7/−8 Ma from the Zgorzelec granodiorite is interpreted as a minimum age of the Neoproterozoic sequence. The Neoproterozoic crust was tilted and subsequently early Cambrian intrusions dated at 522±2 Ma (T ovice granite), 524±3 Ma (V epadly granodiorite), 523±3 Ma (Smr ovice tonalite), 523±1 Ma (Smr ovice gabbro) and 524±0.8 Ma (Orlovice gabbro) were emplaced into transtensive shear zones.     

Geochemistry and sequence stratigraphy of regional Upper Cretaceous limestone units, offshore eastern Canada

Hydrocarbons occur in two regional, Upper Cretaceous limestone units—the Turonian-Coniacian Petrel Member, and the Santonian-Maastrichtian Wyandot Formation. The units form important seismic markers beneath the Scotian Shelf and the Grand Banks of Eastern Canada. They mainly consist of bioturbated chalk and minor amounts of calcareous mudstone. A search for source rock using the Δ log R technique showed intervals with source potential, but testing of core and cuttings by Rock-Eval analysis showed no source potential. Three issues are the main cause for the inconsistency: (1) unconsolidated shales that likely included organic material were lost during sample washing; (2) severe contamination by mud additives; and (3) presence of gas. The organic matter found on the shelf has been strongly oxidised, but the distal facies of these limestone units and condensed shale units above and below may yet have potential to form source rock, beyond the studied areas.     

Cosmogenic-nuclide ages for New England coastal moraines, Martha's Vineyard and Cape Cod, Massachusetts, USA

Cosmogenic-nuclide exposure ages for 13 glacially transported boulders atop the Martha's Vineyard moraine, MA, USA, indicate that the southeastern margin of the Laurentide ice sheet reached its maximum extent during the last glaciation 23,200±500 yr ago. Another 10 age determinations from the younger Buzzards Bay moraine near Woods Hole, MA, indicate that this moraine complex was formed 18,800±400 yr ago. These ages correlate approximately with the terminations of cooling cycles recorded in Greenland ice cores and coeval ice-rafting events, suggesting that the marginal position of this sector of the ice sheet was tightly coupled to North Atlantic climate during the last glacial maximum.     

A three-dimensional parametric study of the use of soil nails for stabilising tunnel faces

Applying an effective nailing system at a tunnel heading, not only improves the stability of the tunnel heading and limits deformation at the tunnel face, but it also reduces volume loss during excavation and hence reduces ground surface settlement. The effectiveness of a soil nail system is affected by many factors such as the diameter and stiffness of the nails. In this paper, a systematic parametric study was conducted to study the axial rigidity of a nail, E_nA_n, for improving the stability of tunnel headings and reducing ground movements in stiff clay. The parametric study involved a series of three-dimensional elasto-plastic coupled-consolidation finite element analyses. The stability of the tunnel face is improved with increasing E_nA_n. For a given nail density applied at the tunnel face, an optimum axial rigidity of the nail (E_nA_n)_opt can be identified. The efficiency of the nailing system diminishes when (E_nA_n)_opt is reached. The use of a soil nailing system reduces the magnitude of stress relief at the tunnel heading during excavation. Thus, this reduction of stress relief minimises the amount of soil yielding and excess pore water pressure generated in the soil around the tunnel heading.     

Origin of fine-scale sheeted granites by incremental injection of magma into active shear zones: examples from the Pilbara Craton, NW Australia

In the Archaean Pilbara Craton of Western Australia, three zones of heterogeneous centimetre- to metre-scale sheeted granites are interpreted to represent high-level, syn-magmatic shear zones. Evidence for the syn-magmatic nature of the shear zones include imbricated and asymmetrically rotated metre-scale orthogneiss xenoliths that are enveloped by leucogranite sheets that show no significant internal strain. At another locality, granite sheets have a strong shape-preferred alignment of K-feldspar, suggesting magmatic flow, while the asymmetric recrystallisation of the grain boundaries indicates that non-coaxial deformation continued acting upon the sheets under sub-solidus conditions. Elsewhere, randomly oriented centimetre-wide leucogranite dykes are realigned at a shear zone boundary to form semi-continuous, layer-parallel sheets within a magma-dominated, dextral shear zone.

It is proposed that the granite sheets formed by the incremental injection of magmas into active shear zones. Magma was sheared during laminar flow to produce the sheets that are aligned sub-parallel to the shear zone boundary. Individual sheets are fed by individual dykes, with up to 1000s of discrete injections in an individual shear zone. The sheets often lack microstructural evidence for magmatic flow, either because the crystal content of the magma was too low to record internal strain, or because of later recrystallisation.     

Occurrence of naphthalenesulfonates and their condensates with formaldehyde in a landfill leachate and their transport behavior in groundwater of the Upper Rhine Valley, Germany

. Naphthalenesulfonates and their condensation products with formaldehyde are manufactured in the chemical industry for broad application as tanning agents, dispersing agents, and as superplasticizers for concrete. With the disposal of waste they have found their way into the aquatic environment. Five monomeric naphthalenesulfonates and a group of dimeric sulfonated naphthalene-formaldehyde condensates (SNFC) were identified in the leachate and in groundwater observation wells downstream in the plume of the Karlsruhe-West landfill, situated in the Upper Rhine Valley in southwest Germany. For the main monomer of technical SNFC products, 2-naphthalenesulfonate (2-NS), the concentration in the leachate was 170 µg l^–1, which decreased to 9.5 µg l^–1 at a distance of about 300 m from the boundary of the landfill. In the Merdingen tracer test field, the transport of these compounds was studied under more controlled conditions in two tracer experiments with (1) two model compounds, and (2) a technical SNFC product and uranine as a reference tracer. In these experiments, the monomeric naphthalenesulfonates and the SNFC with n=2 behave as conservative tracers. Thus, the findings of the landfill study were supported by these results. Higher molecular SNFC were strongly retarded, which is attributed to adsorption to soil particles. The results of the second tracer experiment suggest a degradation of 2-NS and 2,6-naphthalenedisulfonate (2,6-NDS) after adaptation of the microorganisms in the groundwater aquifer as a consequence of the first tracer experiment.     

A comparison of early juvenile red drum densities among various habitat types in Galveston Bay, Texas

Seagrass meadows are often cited as important nursery areas for newly settled red drum even though many estuaries, such as Galveston Bay, Texas, support large numbers of red drum and have limited seagrass cover, suggesting the use of alternate nursery areas. We examined patterns of habitat use for newly settled red drum at six sampling areas in Galveston Bay; two areas had seagrass beds and four areas had no seagrass. We measured densities in different habitat types using epibenthic sleds and enclosure samplers. Peak recruitment of young red drum to the estuary occurred during September through December. Highest densities of new settlers were found in seagrass meadows (primarilyHalodule wrightii), but when seagrass was absent, the highest densities of red drum occurred along theSpartina alterniflora marsh edge interface. Densities were relatively low on nonvegetated bottom away from the marsh edge. We also examined density patterns in other habitat types at selected sampling areas and found no red drum within marsh vegetation away from the marsh edge interface (5 and 10 m into the marsh interior). Oyster reefCrassostrea virginica was sampled using lift nets, and we found no red drum using this habitat, although adjacent seagrass and marsh interface habitats were used. Even though red drum densities in marsh edge were low relative to seagrass, the large areal extent of marshes in the bay complex probably makes marsh edge the most important nursery habitat for red drum in Galveston Bay.     

Kinetics of Mn(II) oxidation by Leptothrix discophora SS1

The kinetics of Mn(II) oxidation by the bacterium Leptothrix discophora SS1 was investigated in this research. Cells were grown in a minimal mineral salts medium in which chemical speciation was well defined. Mn(II) oxidation was observed in a bioreactor under controlled conditions with pH, O₂, and temperature regulation. Mn(II) oxidation experiments were performed at cell concentrations between 24 mg/L and 35 mg/L, over a pH range from 6 to 8.5, between temperatures of 10°C and 40°C, over a dissolved oxygen range of 0 to 8.05 mg/L, and with L. discophora SS1 cells that were grown in the presence of Cu concentrations ranging from zero to 0.1 μM. Mn(II) oxidation rates were determined when the cultures grew to stationary phase and were found to be directly proportional to O₂ and cell concentrations over the ranges investigated. The optimum pH for Mn(II) oxidation was approximately 7.5, and the optimum temperature was 30°C. A Cu level as low as 0.02 μM was found to inhibit the growth rate and yield of L. discophora SS1 observed in shake flasks, while Cu levels between 0.02 and 0.1 μM stimulated the Mn(II) oxidation rate observed in bioreactors. An overall rate law for Mn(II) oxidation by L. discophora as a function of pH, temperature, dissolved oxygen concentration (D.O.), and Cu concentration is proposed. At circumneutral pH, the rate of biologically mediated Mn(II) oxidation is likely to exceed homogeneous abiotic Mn(II) oxidation at relatively low (≈μg/L) concentrations of Mn oxidizing bacteria.     

Morphologic and spectral investigation of exceptionally well-preserved bacterial biofilms from the Oligocene Enspel formation, Germany

The fossilised soft tissues of a tadpole and an associated coprolitic structure from the organic-rich volcanoclastic lacustrine Upper Oligocene Enspel sediments (Germany) were investigated using high-resolution imaging techniques and nondestructive in situ surface analysis. Total organic carbon analysis of the coprolite and the sediment revealed values of 28.9 and 8.9% respectively. The soft tissues from the tadpole and the coprolite were found to be composed of 0.5 to 1 μm-sized spheres and rod shapes. These features are interpreted as the fossil remains of bacterial biofilms consisting probably of heterotrophic bacteria and fossilised extracellular polymeric substances. They became fossilised while in the process of degrading the organic matter of the organism and the coprolite. Comparison with a modern marine biofilm revealed morphologic details identical to those observed in the fossil bacterial biofilms. Although the fossil biofilms on both macrofossils exhibited identical microtextures, their mode of preservation was inhomogeneous and varied between calcium phosphate and an as yet unidentified mineral phase consisting mainly of Si, Ca, Ti, P, and S, but also showing the presence of Mg, Al, and Fe. The coprolite consists purely of fossilised bacterial cells in a densely packed arrangement and associated fossilised extracellular polymeric substances.In addition to preliminary imaging and energy-dispersive X-ray analysis, both the fossil biofilms and the sediment were investigated by nondestructive in situ analysis using time of flight-secondary ion mass spectroscopy (ToF-SIMS). The mass spectra obtained on the coprolite in mass-resolved chemical mapping mode allowed the tentative identification of a number of organic secondary ion species. Some spectra appear to indicate the presence of bacterial hopanoids, but further work using standard techniques such as gas chromatography mass spectroscopy is needed to conclusively verify the presence of these substances. Nevertheless, ToF-SIMS chemical maps were successfully correlated with electron microscopy images, allowing the correlation of molecular spectra, the spatial distribution of individual organic species, and specific morphologic features to demonstrate the potential of this approach in the analysis of microfossils.