Analysis of seawater for dissolved cadmium, copper and lead: An intercomparison of voltammetric and atomic absorption methods

An intercomparison study of voltammetric and atomic absorption spectrometric methods for determining cadmium, lead and copper in seawater samples was conducted. The voltammetric approach utilizes differential pulse anodic stripping voltammetry using a rotating, glassy carbon, mercury film electrode under conditions developed to minimize contamination sources and to enhance sensitivity for seawater matrices. The atomic absorption approach involves a concentration step using either an organic solvent extraction of metal dithiocarbamate chelates or a Chelex-100 column with detection by graphite furnace atomic absorption spectrometry. Similar and consistent results were obtained using both methods for the three trace metals studied on a wide range of natural seawater samples. Both methods are comparable in sensitivity for cadmium and copper, however the voltammetric method is better suited for the analysis of lead in seawater because of its enhanced sensitivity and low blank. An advantage of the voltammetric approach is its amenability towards real-time shipboard analysis.     

Bioerosion by chemosynthetic biological communities on Holocene submarine slide scars

Geomorphic, stratigraphic, and faunal observations of submarine slide scars that occur along the flanks of Monterey Canyon in 2.0–2.5 km water depths were made to identify the processes that continue to alter the surface of a submarine landslide scar after the initial slope failure. Deep-sea chemosynthetic biological communities and small caves are common on the sediment-free surfaces of the slide scars, especially along the headwall. The chemosynthetic organisms observed on slide scars in Monterey Canyon undergo a faunal succession based in part on their ability to maintain their access to the redox boundaries in the sediment on which they depend on as an energy source. By burrowing into the seafloor, these organisms are able to follow the retreating redox boundaries as geochemical re-equilibration occurs on the sole of the slide. As these organisms dig into the seafloor on the footwall, they often generate small caves and weaken the remaining seafloor. While chemosynthetic biological communities are typically used as indicators of fluid flow, these communities may be supported by methane and hydrogen sulfide that are diffusing out of the fresh seafloor exposed at the sole of the slide by the slope failure event. If so, these chemosynthetic biological communities may simply mark sites of recent seafloor exhumation, and are not reliable fluid seepage indicators.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Fishers' responses to management measures and their socio-economic effects

This session presented a wide range of papers on cooperativeresearch, design of alternative gears and fishing strategies,and new analyses to support management. The contributed papersreflected a real desire to explore different approaches andstrategies to fishery management. It is apparent that fishery policy has had a mixed record ofsuccess and failure at best. In most regions of the world, manystocks are still being overfished or have been severely overfishedin the past. Although rebuilding programmes for overfished stockshave been developed, nationally as well as internationally,only a few have been successful, many others are works in progressand, in too many cases, rebuilding     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Heat flow and mass wasting in the Wilmington Canyon Region: U.S. Continental Margin

The average corrected heat flow in the Wilmington Canyon region, an area of inferred slope instability, is 35 ± 10 mW/m². This average heat flow is marginally consistent with the 46 ± 9 mW/m² measured at other North Atlantic sites over 160 m.y. old. High topographic relief causes most of the variability in surface heat flow and may lower the mean surface heat flow. There is no significant difference between the average corrected heat flow of 35 ± 10 mW/m² in sediment slide areas and the average corrected heat flow of 34 ± 10 mW/m² in undisturbed sediments.     

Optimisation of a catalytic procedure for the determination of total iodine in seawater

A precise method for the determination of total iodine in seawater, which uses a Technicon Auto-Analyser II system and is based on Truesdale and Spencer's (1974) and Truesdale and Smith's (1975) earlier works with a catalytic procedure, is described. The procedure operates over a range of 30–80 μg1^?1 of iodine. As requested by Mark (1973), the way in which the procedure can be varied to suit other applications, and therefore ranges, is explained in detail. The standard deviation at the 50 μg1^?1 level was found to be 0.12 μ1^?1 showing that the method's precision exceeds most, if not all, previously published procedures for this variable. This high degree of resolution makes the procedure suitable for oceanic investigations. The effects of varying the reaction time, the temperature at which the reaction proceeds and the salinity of samples and standards are described. The advantages of using a Technicon Auto-Analyser II system rather than an Auto-Analyser I system are discussed. With slight modification the procedure can also be used in the measurement of river flow where sodium iodide is used as tracer in the dilution method.     

Code of Practice For Ocean Mining: An International Effort to Develop a Code For Environmental Management of Marine Mining

A code of practice for ocean mining has been developed by the International Marine Minerals Society. The code provides general guiding Principles for development of marine mineral resources and delineates Operating Guidelines for application, as appropriate, at specific mining sites. In total 11 operating guidelines are provided to serve as benchmarks for industry and targets for regulatory agencies and other stakeholders. They include the following commitments: •To sustainable development, •To environmentally responsible corporate ethics, •To the development of effective community partnership, •To implementation of environmental risk management, •To the integration of environmental management into all phases of development, •To the establishment of corporate environmental performance targets, •To timely environmental improvements and upgrading, •To responsible rehabilitation of operations sites and decommissioning of facilities, and •To accurate and timely, reporting and documentation, archiving, and performance review.