Temperature dependence of the cation distribution in nickel aluminate (NiAl2O4) spinel: a powder XRD study

NiAl₂O₄ is a largely inverse spinel, which in detail shows increasing randomisation with temperature of Ni and Al between the octahedral and tetrahedral cation sites of the spinel structure. We have used powder XRD to determine this cation distribution in various samples of NiAl₂O₄ quenched after annealing between 700 and 1400° C. The inversion parameter (x) can be measured with a precision of ± 0.004 (one standard deviation), and a comparison of different methods of synthesis, X-ray diffraction and refinement techniques, suggests a probable accuracy of better than 0.01. The results are supported by some preliminary single crystal refinements on flux-grown samples.Below 800° C the rate of cation ordering becomes very slow, and, despite reaching an apparently steady state, it is doubtful if our samples attained complete internal equilibrium. Above 1250° C the cation redistribution becomes so fast that the quenching method becomes unreliable. Between 800 and 1250° C inclusive, the degree of inversion changes smoothly from 0.87 at 800° C to 0.79 at 1250° C, and is accompanied by linear changes in u, the oxygen parameter, from 0.2555 to 0.2563 (±0.0002), and a₀, the lattice parameter, from 8.0462 to 8.0522 Å (±0.0002 Å).     

Planetary nebulae in the Galaxy

It is shown that the planetary nebulae can be divided into three types according to the values of the mass of shell and a central star. The criteria are given using which one can determine the mass type of the nebula. The distance scale of each mass-type planetary nebulae is given. The distribution of planetary nebulae in the Galaxy, their formation rate, scale-height and other physical and kinematic characteristics are investigated. A catalogue of planetary nebulae emitting in the radio range is given.     

Mineralogical, chemical, and crystallographic properties of supergene jarosite-group minerals from the Xitieshan Pb-Zn sulfide deposit, northern Tibetan Plateau, China

Supergene jarosite-group minerals are widespread in weathering profiles overlying Pb-Zn sulfide ores at Xitieshan, northern Tibetan Plateau, China. They consist predominantly of K-deficient natrojarosite, with lesser amounts of K-rich natrojarosite and plumbojarosite. Electron microprobe (EMP) analyses, scanning electron microcopy (SEM) investigation, and X-ray mapping reveal that the jarosite-group minerals are characterized by spectacular oscillatory zoning composed of alternating growth bands of K-deficient and K-bearing natrojarosite (K₂O >1 wt.%). Plumbojarosite, whenever present, occurs as an overgrowth in the outermost bands, and its composition can be best represented by K_0.29Na_0.19Pb_0.31Fe_2.66Al_0.22(SO₄)_1.65(PO₄)_0.31(AsO₄)_0.04(OH)_7.37. The substitution of monovalent for divalent cations at the A site of plumbojarosite is charge balanced by the substitution of five-valent for six-valent anions in XO₄ at the X site. Thermogravimetric analysis (TGA) of representative samples reveal mass losses of 11.46 wt.% at 446.6 °C and 21.42 wt.% at 683.4 °C due to dehydroxylation and desulfidation, respectively. TGA data also indicate that the natrojarosite structure collapses at 446.6 °C, resulting in the formation of NaFe(SO₄)₂ and minor hematite. The decomposition products of NaFe(SO₄)₂ are hematite and Na₂SO₄. Powder X-ray diffraction (XRD) analyses show that the jarosite-group minerals have mean unit-cell parameters of a?=?7.315 Å and c?=?016.598 Å. XRD and EMP data support the view that substitutions of Na for K in the A site and full Fe occupancy in the B site can considerably decrease the unit-cell parameter c, but only slightly increase a. The results from this study suggest that the observed oscillatory zoning of jarosite-group minerals at Xitieshan resulted mainly from substitutions of K for Na at the A site and P for S at the X site.     

Evaluation of the photometric perturbations in close binary systems

In the present study the photometric perturbations arising from the mututal tides of the two components in a close binary system are calculated and discussed. The evaluation is made for each star separately as well as for both stars together in the case of occulation eclipses terminating in totality.     

Detection and extraction of signals from the epoch of reionization using higher-order one-point statistics

Detecting redshifted 21-cm emission from neutral hydrogen in the early Universe promises to give direct constraints on the epoch of reionization (EoR). It will, though, be very challenging to extract the cosmological signal (CS) from foregrounds and noise which are orders of magnitude larger. Fortunately, the signal has some characteristics which differentiate it from the foregrounds and noise, and we suggest that using the correct statistics may tease out signatures of reionization. We generate mock data cubes simulating the output of the Low Frequency Array (LOFAR) EoR experiment. These cubes combine realistic models for Galactic and extragalactic foregrounds and the noise with three different simulations of the CS. We fit out the foregrounds, which are smooth in the frequency direction, to produce residual images in each frequency band. We denoise these images and study the skewness of the one-point distribution in the images as a function of frequency. We find that, under sufficiently optimistic assumptions, we can recover the main features of the redshift evolution of the skewness in the 21-cm signal. We argue that some of these features – such as a dip at the onset of reionization, followed by a rise towards its later stages – may be generic, and give us a promising route to a statistical detection of reionization.     

Corundum- and kyanite-bearing anatexites from the Precambrian of tanzania

In the Precambrian near Morogoro (East Tanzania) there are anatectic gneisses which are composed of two different domains: (1) Medium grained gneiss with the assemblage (+ rutile + baddeleyite): albite (ab₉₅an₀₃or₀₂) + muscovite + phlogopite_ss + corundum, and albite (ab₈₈an₀₉or₀₃ + kyanite or sillimanite + phlogopite_ss. (2) Coarse grained nests of corundum and antiperthite with minor albite, muscovite, phlogopite, rutile, baddeleyite, and tourmaline. The bulk composition of the antiperthite id ab₇₅an₀₂or₂₃, the composition of the Na-phase ab₉₅an₀₃or₀₂, that of the K-phase ab₁₃an₀₀or₈₇. Phase relationship of the rock can be modelled in the Na-rich, Si-undersaturated part of the KNASH system. P-T conditions are close to the intersection of the melting curve muscovite_ss + H₂O = corundum + liquid with the kyanite-sillimanite transition, i.e. 7.7 kb/695°C assuming a_H2O = 1.     

Improving the efficiency of ant algorithms using adaptive refinement: Application to storm water network design

The ant algorithm is a new evolutionary optimization method proposed for the solution of discrete combinatorial optimization problems. Many engineering optimization problems involve decision variables of continuous nature. Application of the ant algorithm to the optimization of these continuous problems requires discretization of the continuous search space, thereby reducing the underlying continuous problem to a discrete optimization problem. The level of discretization of the continuous search space, however, could present some problems. Generally, coarse discretization of the continuous design variables could adversely affect the quality of the final solution while finer discretization would enlarge the scale of the problem leading to higher computation cost and, occasionally, to low quality solutions. An adaptive refinement procedure is introduced in this paper as a remedy for the problem just outlined. The method is based on the idea of limiting the originally wide search space to a smaller one once a locally converged solution is obtained. The smaller search space is designed to contain the locally optimum solution at its center. The resulting search space is discretized and a completely new search is conducted to find a better solution. The procedure is continued until no improvement can be made by further refinement. The method is applied to a benchmark problem in storm water network design discipline and the results are compared with those of existing methods. The method is shown to be very effective and efficient regarding the optimality of the solution, and the convergence characteristics of the resulting ant algorithm. Furthermore, the method proves itself capable of finding an optimal, or near-optimal solution, independent of the discretization level and the size of the colony used.     

Land use change under conditions of high population pressure: the case of Java

A long history of increases in population pressure in Java has caused agricultural land use to expand and intensify. More recent land use changes caused the conversion of prime agricultural land into residential and industrial area. Results of a dynamic, regional-scale, land use change model are presented, defining the spatial distribution of these land use changes. The model is based on multi-scale modelling of the relations between land use and socio-economic and biophysical determinants. Historical validation showed that the model can adequately simulate the pattern of land use change. Future patterns of land use change between 1994 and 2010 are simulated assuming further urbanization. The results suggest that most intensive land use changes will occur in Java's lowland areas.