The age and composition of the pre-Cenozoic basement of the Jalisco Block: implications for and relation to the Guerrero composite terrane

The Jalisco Block is thought to be part of the Guerrero terrane, but the nature and age of the underlying crystalline basement are largely unknown. We have collected a suite of schists, granitoids, and weakly metamorphosed marine sediments from various parts of the Jalisco Block including Atenguillo and Ameca, Mascota and San Sebastián, Cuale, Puerto Vallarta, Punta Mita, Yelapa, and Tomatlán. The schists range in age from 135 to 161 Ma, with many exhibiting Proterozoic and Phanerozoic zircon ages. The granitoids range in age from 65 to 90 Ma, and are calc-alkaline compositionally—similar to granitoids from the Puerto Vallarta and Los Cabos batholiths. The Jalisco granitoids also experienced similar uplift rates to granitoids from the regions to the north and south of the Jalisco Block. The marine sediments yield a maximum depositional age of 131 Ma, and also contain a significant zircon population with ages extending back to the Archean. Granitoids from this study define two age groups, even after the effects of thermal resetting and different closure temperatures are considered. The 66.8-Ma silicic ash flow tuff near Union de Tula significantly expands the extent of this Cretaceous–Paleocene age ash flow tuff unit within the Jalisco Block, and we propose calling the unit “Carmichael silicic ash flow tuff volcanic succession” in honor of Ian Carmichael. The ages of the basement schists in the Jalisco Block fully overlap with the ages of terranes of continental Mexico, and other parts of the Guerrero terrane in the south, confirming the autochthonous origin of the Jalisco Block rather than exotic arc or allochthonous origin. Geologic data, in combination with geochronologic and oxygen isotopic data, suggest the evolution of SW Mexico with an early 200–1,200-Ma passive margin, followed by steep subduction in a continental arc setting at 160–165 Ma, then shallower subduction by 135 Ma, and finally, emplacement of granitoids at 65–90 Ma.     

Mineralogical and Geochemical Constraints on the Sediment Sources of Late Stone Age Pottery from the Birimi Site,Northern Ghana

The mineralogy and bulk chemical compositions of 15 Kintampo (Late Stone Age) potsherds from the Birimi site on the Gambaga Escarpment and eight samples of local sediment were determined with the intent of characterizing these wares and identifying the material used in their manufacture. Sediment from clay pits still used by potters north of the escarpment contains iron‐rich laterite clasts (100 × XFeO_t = 100 × FeO_t/[FeO_t + Al₂O₃ + SiO₂] ≥10). Sedimentary clasts in stream sediments are relatively siliceous and iron‐poor (100 × XFeO_t < 10). Bulk geochemical data together with the compositions of lithic clasts (laterite, siltstone/sandstone) link the pottery to sediment sources, including escarpment sediments not presently used by Ghanaian potters. Fresh granite clasts found in some of the sherds were not found in the analyzed sediment samples, although some of their distinctive mineralogical constituents (e.g., variably barian alkali feldspar) are present. The analytical data suggest that pots found at Birimi were made locally by mixing escarpment sediment with clay and stream sediment brought in from below the escarpment. This contrasts with present‐day practice, whereby the pots themselves are imported. The place where Birimi pottery was made and the outcrop source of aluminous sediment (mudstone with an “escarpment” trace element signature) used in these wares, however, remain unidentified. © 2013 Wiley Periodicals, Inc.     

Characterization of the chemical structures of natural and synthetic aluminosilicate gels and sols by infrared spectroscopy

Infrared spectra in the 300–1400 cm^?1 region indicate that the non-crystalline products of interaction between hydroxyaluminium species and orthosilicic acid in dilute aqueous solutions of pH < 5 differ markedly in structure from those formed in near-neutral and alkaline solutions of pH > 6. The compound formed in acid solution has an infrared spectrum similar to imogolite, and is termed proto-imogolite; like imogolite, it contains orthosilicate groups and 6-coordinated aluminium, and has an ideal Si:Al ratio of around 0.5, but it can incorporate some excess alumina or silica and it does not have the regular tubular structure of imogolite. Compounds formed in alkaline solutions that are not too dilute have infrared spectra resembling the feldspathoid group of minerals and are termed hydrous feldspathoids. They incorporate a condensed tetrahedral framework with an Si:Al ratio greater than one, but can also contain 6-coordinated aluminium.Natural allophanes of the proto-imogolite and hydrous feldspathoid types exist. The allophane of weathered pumice, however, contains a condensed silicate anion that incorporates little tetrahedral aluminium. Proto-imogolite forms stable sols at pH < 5 and must play an important role in the transport of aluminium in acidic natural waters containing dissolved silica.     

Shallow necking depth and differential denudation linked to post‐rift continental reactivation: The origin of the Cenozoic basins in southeastern Brazil

The southeastern Brazilian margin presents post‐breakup Cenozoic tectonism that created a series of grabens and small sedimentary basins, known as the Continental Rift of Southeastern Brazil. The formation of this rift occurred long after the South Atlantic ocean opening and has been attributed to different mechanisms like regional uplift induced by hotspot activity, pulses of Andean orogeny and reactivation of pre‐existing faults. However, the proposed models lack an analytical or numerical verification from a geodynamic point of view. Based on finite element modelling of the lithospheric stress field evolution we conclude that a shallow necking depth, consistent with the hyperextended southeastern Brazilian margin, combined with differential denudation of the continent, resulted in an extensional stress field in the upper crust that induced the observed Cenozoic tectonism.     

The compressibility of silicate liquids containing Fe2O3 and the effect of composition,temperature, oxygen fugacity and pressure on their redox states

Ultrasonic longitudinal acoustic velocities in oxidized silicate liquids indicate that the pressure derivative of the partial-molar volume of Fe₂O₃ is the same in iron-rich alkali-, alkaline earth- and natural silicate melt compositions at 1 bar. The dV/dP for multicomponent silicate liquids can be expressed as a linear combination of partial-molar constants plus a positive excess term for Na₂O−Al₂O₃ mixing. Partial-molar properties for FeO and Fe₂O₃ components allow extension of the empirical expression of Sack et al. (1980) to permit the calculation of Fe-redox equilibrium in a natural silicate liquid as a function of composition, temperature, fo₂ and pressure; a more formal thermodynamic expression is presented in the Appendix. The predicted equilibrium fo₂ of natural silicate melts, of fixed oxygen content, closely parallels that defined by the metastable assemblage fayalite+magnetite+β-quartz (FMQ), in pressure-temperature space. A silicate melt initially equilibrated at 3 GPa and FMQ, will remain within approximately 0.5 log₁₀ units of FMQ during its closed-system ascent. Thus, for magmas closed to oxygen, iron-redox equilibrium in crystal-poor pristine glassy lavas represents an excellent probe of the relative oxidation state of their source regions.     

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.     

6: Classification of VMS deposits: Lessons from the South Uralides

VMS deposits of the South Urals developed within the evolving Urals palaeo-ocean between Silurian and Late Devonian times. Arc-continent collision between Baltica and the Magnitogorsk Zone (arc) in the south-western Urals effectively terminated submarine volcanism in the Magnitogorsk Zone with which the bulk of the VMS deposits are associated. The majority of the Urals VMS deposits formed within volcanic-dominated sequences in deep seawater settings. Preservation of macro and micro vent fauna in the sulphide bodies is both testament to the seafloor setting for much of the sulphides but also the exceptional degree of preservation and lack of metamorphic overprint of the deposits and host rocks. The deposits in the Urals have previously been classified in terms of tectonic setting, host rock associations and metal ratios in line with recent tectono-stratigraphic classifications. In addition to these broad classes, it is clear that in a number of the Urals settings, an evolution of the host volcanic stratigraphy is accompanied by an associated change in the metal ratios of the VMS deposits, a situation previously discussed, for example, in the Noranda district of Canada.Two key structural settings are implicated in the South Urals. The first is seen in a preserved marginal allochthon west of the Main Urals Fault where early arc tholeiites host Cu–Zn mineralization in deposits including Yaman Kasy, which is host to the oldest macro vent fauna assembly known to science. The second tectonic setting for the South Urals VMS is the Magnitogorsk arc where study has highlighted the presence of a preserved early forearc assemblage, arc tholeiite to calc-alkaline sequences and rifted arc bimodal tholeiite sequences. The boninitc rocks of the forearc host Cu–(Zn) and Cu–Co VMS deposits, the latter hosted in fragments within the Main Urals Fault Zone (MUFZ) which marks the line of arc-continent collision in Late Devonian times. The arc tholeiites host Cu–Zn deposits with an evolution to more calc-alkaline felsic volcanic sequences matched with a change to Zn–Pb–Cu polymetallic deposits, often gold-rich. Large rifts in the arc sequence are filled by thick bimodal tholeiite sequences, themselves often showing an evolution to a more calc-alkaline nature. These thick bimodal sequences are host to the largest of the Cu–Zn VMS deposits.The exceptional degree of preservation in the Urals has permitted the identification of early seafloor clastic and hydrolytic modification (here termed halmyrolysis sensu lato) to the sulphide assemblages prior to diagenesis and this results in large-scale modification to the primary VMS body, resulting in distinctive morphological and mineralogical sub-types of sulphide body superimposed upon the tectonic association classification.It is proposed that a better classification of seafloor VMS systems is thus achievable using a three stage classification based on (a) tectonic (hence bulk volcanic chemistry) association, (b) local volcanic chemical evolution within a single edifice and (c) seafloor reworking and halmyrolysis.     

Activity-composition relations in the system CaCO3-MgCO3 predicted from static structure energy calculations and Monte Carlo simulations

Thermodynamic mixing properties and subsolidus phase relations of the rhombohedral carbonate system, (1 − x) · CaCO₃ − x · MgCO₃, were modelled in the temperature range of 623-2023 K with static structure energy calculations based on well-parameterised empirical interatomic potentials. Relaxed static structure energies of a large set of randomly varied structures in a 4 × 4 × 1 supercell of calcite (a = 19.952 Å, c = 17.061 Å) were calculated with the General Utility Lattice Program (GULP). These energies were cluster expanded in a basis set of 12 pair-wise effective interactions. Temperature-dependent enthalpies of mixing were calculated by the Monte Carlo method. Free energies of mixing were obtained by thermodynamic integration of the Monte Carlo results. The calculated phase diagram is in good agreement with experimental phase boundaries.     

Projected changes in meteorological drought over East Africa inferred from bias-adjusted CMIP6 models

Natural Hazards - The ongoing global warming has caused unprecedented changes in the climate system, leading to an increase in the intensity and frequency of weather and climate extremes. This...     

Web-oriented GIS system for monitoring, conservation and law enforcement of the Brazilian Amazon

A web GIS (WGIS) system for the Brazilian Amazon, named ImazonGeo and based on open source and public domain data, is presented. ImazonGeo was built following three principles. First, the system is based on Spatial Data Infrastructure architecture and web interface built using free software and public domain data. Second, we went beyond visualization of maps and spatial queries by providing information obtained with spatial analysis models. To do that, we designed a database that stores the results of previously defined spatial analyses and developed customized reports and query tools to facilitate fast access of information by end-users. Finally, the system is application-oriented in the areas of forest monitoring, conservation and forest law enforcement, meaning that it aims to contribute to support the protection of Brazilian Amazon forests. We illustrate these principles by presenting ImazonGeo’s technology, architecture, content and tools. Moreover, we present two successful cases to demonstrate how the system is being used. We conclude the paper discussing the challenges and potential solutions to turning our WGIS-SDI system into an internet hub of geo-information about the Brazilian Amazon.