Tectonometamorphic evolution of the Koralm Complex (Eastern Alps): constraints from microstructures and textures of the ‘Plattengneis’ shear zone

Lattice preferred orientations (LPO) of quartz have been investigated along a south–north oriented section across the Plattengneis of the Koralm Complex (Eastern Alps). The Plattengneis forms an important shear zone within the Austroalpine nappe complex of the Eastern Alps, which has developed during the Cretaceous evolution of the Alpine orogen. The quartz c-axes form small circle distributions in the southernmost parts of the Koralm Complex, which represent the uppermost structural level of the Plattengneis. Further to the North two maxima between the Y and Z directions of the finite strain can be interpreted in terms of preferred slip on the rhomb planes. These fabrics continuously grade into (type I and type II crossed) girdle distributions in a northward direction. A strong maximum near the Y-axis with the tendency to be distributed along a single girdle, with three corresponding maxima of a-axes near the margin of the pole figure, can be observed in the central and northern parts. Such LPO are characteristic for both high grade metamorphic conditions and high finite strain. The microstructures display that the deformation within the Plattengneis shear zone was synmetamorphic. A continuous increase of peak temperatures (and pressure) from approximately 550 °C to approximately 750 °C from the South to the central parts can be inferred from geothermometric calculations. The temperatures then decrease to approximately 650 °C from the central parts to the North. The related pressures increase from 8 to 16 kbar, and then decrease to 10 kbar. The LPO changes that have been observed in the study area are best interpreted in terms of temperature dependence of the activation of glide systems within quartz aggregates. The temperature and pressure evolution may indicate that the central parts of the Koralm Complex have been exhumed by larger amounts than the northern and southern parts. This is also documented by the LPO evolution. Therefore, we assume that the Plattengneis shear zone formed during the exhumation of the Koralm Complex, and is related to the exhumation of high-pressure units in the footwall of this shear zone. Accordingly, the kinematics of the Plattengneis shear zone is rather extensional than thrust-related. The implications for the structural evolution of the Eastern Alps are shortly discussed.     

Status and outlook of hiking trails in the central part of the Low Tatra Mountains in Slovakia between 1980–1981 and 2013–2014

This study presents a methodology for assessment of the condition of hiking trails (HTs) and their impact zones in the central part of the Low Tatra mountain range, based on comparison of two complex data sets gathered in 33 years apart. The first field investigation was performed in 1980 and 1981, and the second in 2013 and 2014. The main goal was to perform a landscape typology in order to assess the susceptibility of landscape complexes to occurrence of anthropogenic and natural destruction processes and to assess the condition and prospects of HTs and their impacts on the adjacent alpine environment. Landscape complexes were characterised by selected abiotic, biotic and technical parameters of HTs and their impact zones. Due to the high variability of these parameters over the length of the HTs, we had to decide on how to map them. This was done using a square grid with 100 m-sized cells. For each cell with HT, the parameters were assigned the typical value within that cell. In total, 26.3 km of HT were studied, stretching over 266 grid cells. On comparison of the two data sets, it was seen that, 64% (171 grid cells) display a generally positive condition, with 54% (143 grid cells) even exhibiting significant improvement or continuously positive state of their condition. 36% (95 grid cells) were in bad condition, including 3% (9 grid cells) whose state had deteriorated, and 2% (6 grid cells) whose state had significantly deteriorated, in the time between the two assessments.     

Seismic performance assessment of “hybrid” structures using two-level multy group GIS oriented approach: case studies

In this paper, a two-level multi-group approach to seismic performance assessment of existing building stock is presented and discussed. The first level of assessment is a simple visual screening based on the principles originally developed in FEMA (Rapid visual screening of buildings for potential seismic hazards: a handbook—FEMA 154 and 155, Applied Technology Council, Redwood City, 2002). The second level of assessment is based on an integrated approach (field survey, geotechnical investigations, experimental testing and analytical investigations) with incorporated procedures of different levels of complexity. The acceptance criteria for assessment are founded on demand versus capacity relationships, defined at element and story level. The developed approach was applied in performance assessment of the existing buildings in Karposh, which is one of the largest and oldest municipalities in Skopje, the capital of the Republic of Macedonia. Rapid visual screening (level_1 activity) was performed for 161 existing buildings. For two selected buildings, level_2 assessment was carried out. The results from the assessment were uploaded into the existing geo-referenced building inventory database on the Karposh municipality that represents a practical tool for the decision makers in enforcing decisions on design and construction of seismically resilient building environment.     

Martian landslides in Valles Marineris: Wet or dry?

The objective of this paper is to determine whether martian landslides in Valles Marineris were wet or dry and place constraints on the availability of liquid water in Valles Marineris during the Amazonian, when the landslides occurred. We, thus, statistically compare the power-law relationship between the volume and runout distance of landslides on Earth with those in Valles Marineris, Mars. The exponent of the power-law for martian landslides is similar to that for dry landslides and volcanic flows on Earth, and differs significantly from wet debris flows on Earth. The constant of proportionality in the observed power-law relationship for martian flows is linearly proportional to gravity, as predicted from physical modeling of dry flows in which the dissipation occurs in a layer of uniform thickness. Conversion of gravitational potential energy to heat is insufficient to generate more than a few weight percent of liquid water in the landslide. We thus conclude that water did not significantly influence the dynamics of landslides in Valles Marineris. This implies predominantly dry conditions in Valles Marineris during the Amazonian.     

Crystal-melt partitioning of noble gases (helium, neon, argon, krypton, and xenon) for olivine and clinopyroxene

Mineral-melt partition coefficients of all noble gases (^min/meltD_i) have been obtained for olivine (ol) and clinopyroxene (cpx) by UV laser ablation (213 nm) of individual crystals grown from melts at 0.1 GPa mixed noble gas pressure. Experimental techniques were developed to grow crystals virtually free of melt and fluid inclusions since both have been found to cause profound problems in previous work. This is a particularly important issue for the analysis of noble gases in crystals that have very low partition coefficients relative to coexisting melt and fluid phases. The preferred partitioning values obtained for the ol-melt system for He, Ne, Ar, Kr, and Xe are 0.00017(13), 0.00007(7), 0.0011(6), 0.00026(16), and , respectively. The respective cpx-melt partition coefficients are 0.0002(2), 0.00041(35), 0.0011(7), 0.0002(2), and . The data confirm the incompatible behaviour of noble gases for both olivine and clinopyroxene but unlike other trace elements these values show little variation for a wide range of atomic radius. The lack of dependence of partitioning on atomic radius is, however, consistent with the partitioning behaviour of other trace elements which have been found to exhibit progressively lower dependence of ^min/meltD_i on radius as the charge decreases. As all noble gases appear to exhibit similar ^min/meltD_i values we deduce that noble gases are not significantly fractionated from each other by olivine and clinopyroxene during melting and fractional crystallisation. Although incompatible, the partitioning values for noble gases also suggest that significant amounts of primordial noble gases may well have been retained in the mantle despite intensive melting processes. The implication of our data is that high primordial/radiogenic noble gas ratios (³He/⁴He, ²²Ne/²¹Ne, and ³⁶Ar/⁴⁰Ar) characteristic of plume basalt sources can be achieved by recycling a previously melted (depleted) mantle source rather than reflecting an isolated, non-degassed primordial mantle region.     

Determination of actual limit angles to the surface and their comparison with the empirical values in the Upper Silesian Basin (Czech Republic)

This study deals with the determination of the actual limit angles in the long-term formed subsidence basin in the Czech part of the Upper Silesian Basin (the remaining part lays in Poland). Here there was the most extensive underground exploitation of black coal in the north-east of the Czech Republic. A limit angle is absolutely decisive in the determination of deep mining influences in relation to the current and future utilisation of this territory. The two CSM and Paskov mine localities on the edge of the subsidence basin were selected for this study, since they could not have been affected by mining in neighbouring mines. On the grounds of the long-term levelling monitoring of points on the surface which started prior to mining, the horizontal distance between the mined out area and the undisturbed ground surface was identified. The impact of limit angle on the surface was calculated by means of the horizontal distance and the established mining depth. Such identified actual limit angles reached the values of 36° at the CSM Mine and 25° for the Paskov Mine. The calculated values are significantly lower when compared with the currently applied empirical values of 57° for the CSM Mine and 56° for the Paskov Mine. This means that the extent of the undermining effects is unambiguously wider by 611 m at the CSM Mine and by 883 m at the Paskov Mine. This study thus establishes the existence of a significantly vaster area influenced by coal deep mining than previously expected. The identified facts lead to the conclusion that regular revisions and follow-up updates of the empirically determined parameters are recommended.     

Time constraints for the evolution of a large slope collapse in karstified mountainous terrain of the southwestern Crimean Mountains, Ukraine

Prominent longitudinal features are often reported on the surfaces of mass movement deposits. However, the genesis and implications of these have not hitherto been considered, and herein we present preliminary observations of their occurrence both in the field and in the laboratory. Elongated ridges are often oriented (sub-) parallel to the flow direction and aligned radially from the source due to debris spreading. They are particularly prominent in large (> 10⁶m³) rock avalanches emplaced onto deformable substrates and are also found in the proximal reaches of volcanic debris avalanches. Flowbands, which are longer and thinner expressions of longitudinal ridges, are continuous along the entire flow length and are observed in rock avalanches emplaced onto glaciers, in snow and some ice avalanches, in pyroclastic flows and some block-and-ash flows, in ejecta sheets, in extraterrestrial landslides, and in some volcanic debris avalanches. Other volcanic debris avalanches and the distal areas of rock avalanches often display hummocks that are aligned radially from the source; we propose that these aligned hummocks are remnants of longitudinal ridges. The formation of elongate ridges (and their expressions as flowbands, aligned hummocks, or distal lobes and digits) in qualitatively-similar fashion in both laboratory and field environments suggests they represent an intrinsic tendency of granular flows in a wide range of situations.     

Hot granulite nappes — Tectonic styles and thermal evolution of the Proterozoic granulite belts in East Africa

A section through the Neoproterozoic Mozambique Belt of Tanzania exposes western foreland (Archaean Tanzania Craton and Palaeoproterozoic Usagaran Belt), marginal (Western Granulites) and eastern, internal (Eastern Granulites) portions of the orogen. The assembly of granulite nappes at ca. 620 Ma displays westward emplacement along an eastward deepening basal decollement and forward propagation of thrusts, climbing from the deep crust to the surface. This goes along with eastward increase of syntectonic temperatures, derived from prevalent deformation mechanisms, and eastward decrease of the kinematic vorticity number. Distinctly different pressure - temperature paths with a branch of isothermal decompression (ITD) in Western Granulites and isobaric cooling (IBC) in Eastern Granulites reflect residence times of rocks within lower crustal levels. Western Granulites, exhumed rapidly at the orogen margin, display ITD and non-coaxial fabrics. Eastern Granulites in the internal orogen portions escaped from rapid exhumation and show IBC and co-axial flow fabrics. The vertical variation of structural elements, i.e. basement — cover relations within the Eastern Granulites, shows decoupling between lower and middle crust with horizontal west — east stretching in the basement and horizontal west — east shortening in the cover.A model of hot fold nappes [Beaumont, C., Nguyen, M.H., Jamieson, R.A., Ellis, S., 2006. Crustal flow modes in large hot orogens. In: Law, R.D., Searle, M.P., Godin, L., (eds). Channel Flow, Ductile Extrusion and Exhumation in Continental Collision Zones. Geological Society, London, Special Publications. vol. 268, 91–145] is adopted to explain flow diversity in the deep crust. The lower crust represented by Eastern Granulite basement flowed coaxially outwards (westward) in response to thickened crust and elevated gravitational forces, supported by a melt-weakened, viscous channel at the crustal base. Horizontal flow with rates faster than thermal equilibration gave rise to isobaric cooling. Simultaneously the mid crust (Eastern Granulite cover) was shortened when hot fold nappes moved along upward climbing thrust planes. Western Granulites preserved isothermal decompression through exhumation by thrusting and coeval erosion at the orogen front.Two different styles define the Neoproterozoic East African Orogen between northern Egypt and southern Mozambique. The Arabian Nubian Shield in the north is classified as small and cold orogen in which thin — skinned thrusting was associated with lateral extrusion. The Central Mozambique Belt in Tanzania/Southern Kenya is classified as large and hot orogen characterized by thick-skinned thrusting and assembly of large granulite nappes.     

Cost and Co<Subscript>2</Subscript>-Emission Reduction of Biomass Cascading: Methodological Aspects and Case Study of SRF Poplar

This study presents and applies a coherent methodological framework to compare biomass cascading chains, i.e. the subsequent use of biomass for materials, recycling and energy recovery, considering land use, CO₂ emission reduction and economic performance. Example cascading chains of short rotation poplar wood are compared with each other on the basis of literature data. Results for these chains vary strongly, namely, from CO₂ mitigation benefits of 200 /Mg CO₂ to CO₂ mitigation costs of 2200 /Mg CO₂, and from net CO₂ emission reductions per hectare of biomass production of 28 Mg CO₂/(ha yr) to net CO₂ emissions of 8 Mg CO₂/(ha yr). Using a present-value approach to determine CO₂ emissions and costs affects the performance of long-term cascading chains significantly, i.e. cost and CO₂ emission reduction are decreased. In general, cascading has the potential to improve both CO₂ emission reduction per hectare and CO₂ mitigation costs of biomass usage. However, this strongly depends on the biomass applications combined in the cascading chain. Parameters that significantly influence the results are market prices and gross energy requirements of substituted materials and energy carriers, and the efficiency of biomass production. The method presented in this study is suitable to quantify land use, CO₂ emission reduction and economic performance of biomass cascading systems, and highlights the possible impact of time on the attractiveness of specific cascading chains.