A GIS numerical framework to study the process basis of scaling statistics in river networks

A new geographic information system (GIS) numerical framework (NF), called CUENCAS, for flows in river networks is presented. The networks are extracted from digital elevation models (DEMs). The program automatically partitions a basin into hillslopes and channel links that are required to correspond to these features in an actual terrain. To investigate the appropriate DEM resolution for this correspondence, we take a high-resolution DEM at 10-m pixel size, and create DEMs at eight different resolutions in increments of 10 m by averaging. The extracted networks from 10-30 m remain about the same, even though there is a tenfold reduction in the number of pixels. By contrast, the extracted networks show increasing distortions of the original network from 40-90 m DEMs. We show the presence of statistical self-similarity (scaling) in the probability distributions of drainage areas in a Horton-Strahler framework using CUENCAS. The NF for flows takes advantage of the hillslope-link decomposition of an actual terrain and specifies mass and momentum balance equations and physical parameterizations at this scale. These equations are numerically solved. An application of NF is given to test different physical assumptions that produce statistical self-similarity in spatial peak flow statistics in a Horton-Strahler framework.     

Estimation of ship velocities from MODIS and OCM

Detection of ships and their tracks in the atmosphere from satellites was earlier demonstrated by Porch, Noone, and Kaufman, among others. In this letter, we have gone one step further to estimate the ship speed and direction by locating them and their tracks from multisatellite imagery. Exhausts from the ships create streaks of clouds in the atmosphere that help identify the same ship from two satellites. Ship velocities are estimated from displacements of ships. We have used optical sensors data from Moderate Resolution Imaging Spectroradiometer (MODIS) and Ocean Color Monitor (OCM) to demonstrate this technique. Estimated velocities of ships are within the expected range. Application of this approach has general interest to the navy, coast guards, shipping corporations, commercial ship owners, and fishermen. More satellite observations can be used to continuously monitor the ship velocities.     

Eddies and planetary waves in the Central Arabian Sea

Eddies and planetary waves are identified as one of the important factors that control the dynamics of the Arabian Sea. During 10–14 January 1990, Ignat, Paulyuchenkov (USSR ship) conducted an experiment in the central Arabian Sea and of late TOPEX/POSEIDON satellites collected data on sea surface height (SSH) anomalies of the Arabian Sea. These data sets give an opportunity to understand the characteristic of eddies and planetary waves in this region during winter. The geostrophic flow revealed three anticyclonic and two cyclonic eddies of diameters ranging from 75 to more than 150 km from surface to subsurface levels. Current speeds around different eddies were maximum at surface and varied from 9 cm/s to 25 cm/s (at the middle point between the center and periphery). The occurrence of eddies were further investigated with the TOPEX/POSEIDON altimetry for the years 1993–97. The analysis revealed multiple eddies of diameter 100 to 550 km occur every year with maximum number of eddies during 1997 and minimum during 1995. The calculated speed varied between 8–30 cm/s around various eddies. Longitude-Time plots showed annual Rossby waves generating at the eastern Arabian Sea and propagating westwards with a phase speed of ~ 10 cm/s along 16° N. Further, it was observed that these waves arrived in the study area by January. In addition, another positive anomaly of SSH was found generating at the western Arabian Sea simultaneously and extended up to the study region by April–June. Time series of SSH at selected locations along 16°N revealed many small-scale oscillations and their spatial variability. These oscillations were delineated using the FFT analysis. Other than the Rossby wave, the major components at the study region were 40–60 and 26–32 day oscillations. The implications of these long period waves associated with eddies are discussed.     

Simulating the effect of Nitrogen application on Wheat Yield by linking remotely sensed measurements with wtgrows simulation model

A field experiment was conducted on wheat at New Delhi with five treatments of Nitrogen (N) fertilizer application (0, 30, 60, 90 and 120 kgha^-1). Relationship has been established between observed leaf area index (LAI) and remotely sensed vegetation indices. These relationships are inverted and used for predicting LAI from vegetation indices on different days after sowing. The “re-initialization” strategy is implemented in model WTGROWS in which initial conditions of model are changed so that the model simulated LAI match remote sensing predicted LAI. The model performance with re-initialization has been evaluated by comparing the simulated grain yield and total above-ground dry matter (TDM) values with the actual observations. The results show that in-season re-initialization is effective in model course correction by improving the simulated results of yield and TDM for different N treatments even though the model was run with no N stress condition. Model re-initialization at different days shows that the closer is the day of re-initialization to crop anthesis the more effective is model course correction. Also, the treatment showing maximum error in yield simulation without re-initialization shows maximum reduction in error by re-initialization. The approach shows that the remote sensing inputs can substitute for some of the inputs or errors in inputs required by crop models for yield prediction.     

Land surface temperature retrieval and its validation using NOAA AVHRR thermal data

The retrieval of land (soil-vegetation complex) surface temperature (LST) was carried out over semi-arid mixed agriculture landscape of Gujarat using thermal bands (channel 4 and 5) and ground emissivity from atmospherically corrected NDVI of NOAA AVHRR LAC images. The atmospheric correction of Visible and NIR band reflectance was done using SMAC model. The LST computed from split-window method and subsequently corrected with fractional vegetation cover were then compared with near synchronous ground observations of soil and air temperatures made during 13–17 January and April, 1997 at five Land Surface Processes Experiment (LASPEX) sites of Anand, Sanand, Derol, Arnej and Khandha covering 100 km x 100 km. The fractional vegetation cover corrected LST at noon hrs. varied from 301.6 – 311.9K in January and from 315.8 – 325.6K in April. The LST_corr were found to lie in the mid way between AT and ST during January. But in April, LST were found to be more close to ST which may be due to relatively poor vegetation growth as indicated by lower NDVI values in April indicating more contribution to LST from exposed soil surface.     

Check dam positioning by prioritization of micro-watersheds using SYI model and morphometric analysis — Remote sensing and GIS perspective

Sediment Yield Index (SYI) model and results of morphometric analysis have been used to prioritize watersheds and to locate sites for checkdam positioning in Tarafeni watershed in Midnapur district. West Bengal. Various thematic maps such as land use/land cover, slope, drainage, soil etc. were prepared from 1RS ID LISS III digital data, SOI toposheets of 1:50,000 scale and other reference maps. Morphometric parameters such as bifurcation ratio (R_b). drainage density (D_d), texture ratio (T), length of overland flow (L_o), stream frequency (F_u), compactness coefficient (C_c), circularity ratio (R_c), elongation ratio (E_r), shape factor (B_s) and form factor (R_f) were computed. Automated demarcation of prioritization of micro-watersheds was done by using GIS overlaying technique by assigning weight factors to all the identified features in each thematic map and ranks were assigned to the morphometric parameters. Five categories of priority viz., very high, high, medium, low and very low, were given to all the watersheds in both the methods. Sixty-two micro-watersheds using SYI method and twenty-three micro-watersheds using morphometric have been prioritized as very high priority. Final priority map was prepared by considering the commonly occurred very high-prioritized micro-watersheds in both SYI model and morphometric analysis. Twenty-four suitable sites were identified for check dam construction in 21 highly prioritized watersheds. It is proved that integrated study of SYI model and morphometric analysis yield good result in prioritization of watersheds.     

A new kind of cloudy sky model to compute instantaneous values of diffuse and global solar irradiance

Summary A model that uses two parameters to describe the state of the sky is presented. The parameters are the total cloud amount and a new two-value parameter – the sunshine number – stating whether the sun is covered or uncovered by clouds. Regression formulae to compute instantaneous cloudy sky global and diffuse irradiance on a horizontal surface are proposed. Fitting these relationships to Romanian data shows low bias errors for global radiation but larger errors for diffuse radiation. The model’s accuracy is significantly higher than one based on total cloud amount alone. The model is used to generate time-series of solar radiation data. A first approximate relationship, neglecting auto-correlation of the sunshine number, is used in the computations. Received July 17, 2001 Revised November 7, 2001     

Aerosol characterization and optical thickness retrievalsusing GOME and METEOSAT satellite data

Summary ?Retrievals of atmospheric aerosol optical thickness are highly dependent on the choice of the class describing the aerosol properties leading to significant errors while using classes available in the literature. High spectral resolution measurements from GOME (Global Ozone Monitoring Experiment) between the ultraviolet and the near infrared can be used for an accurate characterization of the aerosol optical properties. The radiometer MVIRI (METEOSAT Visible and Infrared Imager) on board the geostationary satellite METEOSAT, while being equipped only with broadband VIS channel, ensures an adequate half-hourly monitoring of the atmospheric conditions over a large portion of the Earth. The present algorithm is based on a combination of data from both sensors for the retrieval of the aerosol optical thickness at the reference wavelength of 0.55 μm (AOT). A case of a desert dust outbreak from the African continent over the Atlantic Ocean is examined. AOT values obtained using a priori fixed classes taken from the literature are compared with those retrieved with this algorithm using the GOME-derived classes. Systematic differences of the order of a few tenths on average are found which remain significant also after considering the measurement errors. This represents a novelty introduced by the synergetic use of both sensors. Received March 13, 2002     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.