Boulder 1, Station 2, Apollo 17: Petrology and petrogenesis

Boulder 1, Station 2, Apollo 17 is a stratified boulder containing dark clasts and dark-rimmed light clasts set in a light-gray friable matrix. The gray to black clasts (GCBx and BCBx) are multigenerational, competent, high-grade metamorphic, and partially melted breccias. They contain a diverse suite of lithic clasts which are mainly ANT varieties, but include granites, basaltic-textured olivine basalts, troctolitic and spinel troctolitic basalts, and unusual lithologies such as KREEP norite, ilmenite (KREEP) microgabbro, and the Civet Cat norite, which is believed to be a plutonic differentiate. The GCBxs and BCBxs are variable in composition, averaging a moderately KREEPy olivine norite. The matrix consists of mineral fragments derived from the observed lithologies plus variable amounts of a component, unobserved as a clast-type, that approximates a KREEP basalt in composition, as well as mineral fragments of unknown derivation. The high-temperature GCBxs cooled substantially before their incorporation into the friable matrix of Boulder 1. The light friable matrix (LFBx) is texturally distinct from the competent breccia clasts and, apart from the abundant ANT clasts, contains clasts of a KREEPy basalt that is not observed in the competent breccias. The LFBx lacks such lithologies as the granites and the Civet Cat norite observed in the competent breccias and in detail is a distinct chemical as well as textural entity. We interpret the LFBx matrix as Serenitatis ejecta deposited in the South Massif, and the GCBx clasts as remnants of an ejecta blanket produced by an earlier impact. The source terrain for the Serenitatis impact consisted of the competent breccias, crustal ANT lithologies, and the KREEPy basalts, attesting to substantial lunar activity prior to the impact. The age of the older breccias suggests that the Serenitatis event is younger than 4.01±0.03 b.y.     

Une approche innovante pour modéliser la biodégradation des composés organochlorés volatils en aquifères poreux

The goal of this study was to develop an innovative chloroethene biodegradation module based on biological, thermodynamical and mechanistic concepts. The biodegradation scheme was based on the postulate that in each part of an aquifer only one degradation mechanism is dominant: the one involving the most energetic electron acceptor. Thus, the selection of the active degradation mechanism was a function of the concentration of different electron acceptors. Modified Monod-type kinetics was used in order to take into account the possible influence of some compounds on the biodegradation of a given organic compound. The numerical model developed was applied to a simple test case, whose results are presented here. To cite this article: F. Nex et al., C. R. Geoscience 338 (2006).     

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.     

A Comparison of Sediment Varves (1950–2003 AD) in Two Adjacent Lakes in Northern Sweden

Koltjärnen and Nylandssjön are two closely situated lakes (<2 km apart) in northern Sweden. During the past century, distinct varved sediments have formed in these lakes. Nylandssjön has two varved, deep basins. Since lake and catchment characteristics superficially appear very similar for the two lakes and they are exposed to the same climate, one would expect the sediment varves to be similar. This investigation compares the varves in the two deep basins of Nylandssjön, and in the two lakes. The comparison of basins of Nylandssjön shows that varve thickness, water content and annual accumulation rates of organic matter and nitrogen are correlated for the period (1970–2003). The grey-scale curves are only clearly similar in about 50% of the varves. In the between-lake comparison varve thickness, water content and annual accumulation rates of organic matter and nitrogen are correlated for the period (1950–1996). However, the annual accumulation rates of dry mass, minerogenic matter and biogenic silica differ between the lakes, as well as within-varve successions in grey-scale. A general explanation to the differences is that the prerequisites for varve formation are not totally similar because of differences in catchment size, catchment- to-lake material fluxes, lake productivity and land-use influence. This study illustrates the complex relationships that exist between a lake, its catchment, in-lake productivity and formation of sediment varves. As a consequence, we must not apply a too simplistic view of the potential of varves as past climatic indicators, especially if the lakes are affected by land-use.     

Tackling social exclusion in European neighbourhoods: experiences and lessons from the NEHOM project

Disadvantaged urban neighbourhoods with their complex social, economic and physical situations have increasingly become the focus of governmental policies in the EU. The emphasis has shifted from improving physical qualities to building opportunities for social groups in these areas. While physical upgrade is easier to achieve, at least in the short run, initiatives often fail in outcomes on communities and local participation. This paper aims to improve understanding on how to tackle area-based social exclusion and create socially coherent communities. Building on the results of the NEHOM project, the focus is on examining how various interventions have impacted local communities and their opportunities for better inclusion. A comparison between neighbourhoods shows that mixing social groups to a certain degree is likely to be a necessary step towards opening long-term opportunities for a disadvantaged neighbourhood. The planned initiatives should at the same time directly benefit local communities, and the involvement of local groups in the planning and implementation process helps to guarantee that the overall changes are accepted by the local community. However, the proposed guidelines do not provide a universal recipe for a successful renewal suiting each neighbourhood—the contextual matters should always be a starting point when planning an initiative.     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

Formation of iron-containing colloids by the weathering of phyllite

The formation of colloids during the weathering of phyllite was investigated by exposing ground phyllite to Milli-Q water. Secondary mineral colloids of 10¹–10² nm were detected in significant concentrations. At pH of about 8.5, the solution concentration of these colloids reached up to 10 mg/L (however, acidification to pH 4.0 prevented the formation of the colloids). The mineralogical composition of the secondary mineral colloids is assumed to be a mixture of ferrihydrite, manganese oxyhydroxides, aluminosilicates, amorphous Al(OH)₃ and gibbsite with possible additions of iron silicates and␣iron-alumino silicates. The colloids were stable over longer periods of time (at least several weeks), even in the presence of suspended ground rock. Direct formation of iron-containing secondary mineral colloids at the rock–water interface by the weathering of rock material is an alternative to the well-known mechanism of iron colloid formation in the bulk of water bodies by mixing of different waters or by aeration of anoxic waters. This direct mechanism is of relevance for colloid production during the weathering of freshly crushed rock in the unsaturated zone as for instance crushed rock in mine waste rock piles. Colloids produced by this mechanism, too, can influence the transport of contaminants such as actinides because these colloids have a large specific surface area and a high sorption affinity.     

Dissolved Trace Metal–Organic Complexes in the Lot–Garonne River System Determined Using the C18 Sep-Pak System

An 11-month observation of dissolved and particulate organic matter, chlorophyll a(Chl a), C18 Sep-Pak extractable hydrophobic dissolved organic matter (hDOM) fraction and associated dissolved trace metals (Cd, Cu, V, Co, Ni, Mo, U) was performed in the Lot–Garonne River system. This system includes the Riou Mort, the Lot River and the downstream reaches of the Garonne River and represents the fluvial transport path of trace metals between the major point source of polymetallic pollution, located in the Riou Mort watershed and the Gironde estuary. Spatial and temporal variations of dissolved and particulate organic carbon and Chl areflect the presence of different types of organic matter and their relation with the hDOM fraction. Maximum Chl a/POC ratios (up to 0.03), indicate intense phytoplankton production from March to May. In the Lot River (Temple), DOC and POC concentrations were clearly higher and mean Chl a concentration (2.8 mg g⁻¹) was about three times higher than those of the other sites. High Chl a/POC ratios suggest high phytoplankton activity with maxima in spring and late summer. In the Riou Mort River, very high POC concentrations of up to 40 (mean: 20) occurred, whereas Chl a concentrations were relatively low indicating low phytoplankton activity. High, strongly variable DOC and POC concentrations suggest important natural (Carboniferous soils, forests) or anthropogenic (e.g., former coal mines, waste areas, agriculture, sewage) carbon sources within the small Riou Mort watershed. Despite high DOC concentrations in the Riou Mort River, hDOM metal fractions were generally lower than those at the other sites. The general order of decreasing binding strength between metals and the organic hydrophobic phase (Cu, U > Co, Ni > V, Mo > Cd) at all four sites was in good agreement with the Irving–William series of transition element affinity towards organic ligands. Accordingly, the role of the hydrophobic phase in dissolved Cd transport appeared to be negligible, whereas the hDOM–Cu fraction strongly contributed to dissolved Cu transport.     

Land-Parcel Land-Use History as a Key to Site Selection for Documenting Soil Contamination Risk： a Case Study from Australian Suburbia

In that orcharding in early-to-mid twentieth century southeastern Australia involved use of certain heavy metal and As compounds in regular pest-control spray procedures, some interest attaches to the possibility that these landparcels are underlain by soils with above-background Cu, Pb and As levels. Interpreta- tion of Land-cover changes allowed land parcels previously occupied by orchards to be identified in the 1950s through time-series air-photos. A comparison of soil analysis results referring to soil samples from control sites, and from land parcels formerly occupied by orchardists, shows that contamination （above-background） levels of cations in the pesticides can be found in the top 6 cm of former orchard soils. It is clear that digital spatial data handling and culturally-informed air photo interpretation has a place in soil contamination studies, land-use planning （with particular reference to re-development） and in administration of public health.     

Facies partitioning and sequence stratigraphy of cool-water, mixed carbonate-siliciclastic sediments (Upper Miocene Guadalquivir Domain, southern Spain)

During the late Miocene, the Guadalquivir Basin and its satellite basin, the Ronda Basin, were under Atlantic cool-water influence. The aim of our study is to develop a sequence stratigraphic subdivision of the Ronda Basin fill and to provide models for the cool-water carbonates. The Upper Miocene of the Ronda Basin can be divided into three depositional sequences. Sequence 1 is early Tortonian, Sequence 2 late Tortonian to earliest Messinian, and Sequence 3 Messinian in age. The sediments were deposited in a ramp depositional system. Sequence 1 is dominated by conglomerates and marls. In Sequence 2 and Sequence 3, carbonate deposits dominate in the inner ramp whereas siliciclastics preferentially occur in the middle and outer ramp. Bryomol carbonate sediments occur in all sequences whereas rhodalgal carbonates are restricted to Sequence 3. In bays protected from siliciclastic influx, rhodalgal deposits formed under transgressive conditions. A bryomol factory occurs in zones of continuous siliciclastic supply. This distribution results from facies partitioning during the flooding of the Ronda Basin, which has a rugged and irregular relief. Embayments were protected from siliciclastic influx and provided regions with less hydraulic energy.