基于IBatisNet框架的工资上报系统的设计与实现

阐述了开发工资系统的意义,在对IBatisNet框架进行简要介绍的基础上,探,讨了工资上报系统的设计思路,详细讲述了IBatisNet框架在系统开发中实际的应用方式,以及相关的总结.从而使工资上报系统具有可扩展性,实用性和可维护性.     

CAWS600自动站地温数值异常故障判断及排除

根据自动站地温数据采集原理、工作流程,对产生地温数值异常故障的原因进行分析和定位,并找出排除故障的方法。     

CH4-H2O体系流体包裹体均一过程激光拉曼光谱定量分析

对南黄海盆地二叠纪地层中某石英脉中的CH4-H2O体系流体包裹体均一过程进行了激光拉曼光谱定量分析。利用甲烷与水的拉曼峰面积比值计算不同温度下流体包裹体中水溶液相中甲烷的浓度,除了在100℃附近出现最小值,随温度增加甲烷浓度呈指数增大。包裹体在214℃完全均一,均一时甲烷的浓度为0·1347mol/L。同时利用甲烷的拉曼特征对流体包裹体均一过程的内压变化作了分析。压力变化可以分为三个区间:19~100℃,随温度升高压力增大;100~150℃压力随温度升高减小;150℃之后压力迅速增大。均一温度下的内压为21·92MPa。流体包裹体内压的变化主要是由甲烷溶解行为和封闭体系的热力学特征决定的。实验表明激光拉曼光技术可以作为定量分析含甲烷流体包裹体的一种有效方法。     

CCSD HP-UHP变质岩中石英脉和东海水晶流体包裹体惰性气体同位素组成及其成因指示意义

中国大陆科学钻探（CCSD）岩心中存在大量石英脉和长英质脉体，关于其成因目前存在板块折返过程中的减压和流体释放以及后期流体穿插等不同成因观点。本文利用高真空气相质谱系统分析了CCSD石英脉和东海水晶流体包裹体中惰性气体同位素组成，其He-Ar、Xe和Ne同位素体系均清楚显示它们主要由地壳变质流体和大气饱和水组成，而基本不含深源地幔流体。在CCSD900～1500m深度的石英脉流体包裹体出现^40Ar／^36Ar和δ^18O同步下降，且与前人对CCSD中HP-UHP岩石的矿物原位δ^18O测定结果变化趋势相似，说明该段原岩在板块俯冲前曾与大气降水发生较为充分的水／岩反应，石英脉继承了围岩的同位素组成特征。流体包裹体惰性气体同位素组成显示CCSD中石英脉和东海水晶可能具有相似的成因，它们均主要形成于HP-UHP岩石在板块折返到地壳中的压力降低和流体释放过程。CCSD HP-UHP岩石及其石英脉中基本不合地幔流体的原因在于本区印支期快速的俯冲和折返过程，被俯冲地壳物质无法与地幔进行充分的同位素交换。此外，退变质作用及其伴生的地壳流体也进一步减弱了HP-UHP岩石中的地幔流体信息。     

Seismic wavefront evolution of multiply reflected, transmitted, and converted phases in 2D/3D triangular cell model

Conventionally grid-cell-based schemes for simulating seismic wavefront propagation, such as the finite difference eikonal equation solver or the shortest-path method, usually adopt regular grids or cells in model parameterization to obtaining (but not exclusively) first arrivals only. However, later arrivals, which often result from the velocity interfaces or discontinuities, can be prevalent and significant (sometimes of large amplitude), making them potentially important additional information to use in practical applications. To better approximate the data acquisition geometry and the irregular interfaces, we exploit a triangular shortest-path method (TSPM; that is to use triangular cells in model parameterization) to simulate seismic wavefront evolution, comprising any kind of transmissions, reflections (or refractions), mode conversions, and combinations thereof, in 2D/3D heterogeneous media. A practical procedure, known as the multistage scheme, was incorporated with the TSPM to propagate seismic wavefronts from one interface (or subsurface in 3D) to the next. By treating each separate layer that the wavefront enters as an independent computational domain, one can simulate wavefront transmission and mode conversion by reinitializing it in the adjacent layer and wavefront reflection (and/or conversion) by reinitializing it in the incident layer. To further improve the computational accuracy, a second level of forward star scheme, previously defined in the grid model, is introduced into the triangular cell model. Several examples (including the Marmousi model) are used to demonstrate the viability and versatility of the multistage TSPM in heterogeneous media, even in the presence of high-velocity contrasts involving interfaces of relatively high curvature. With the introduction of the second level of forward star scheme, the total numbers of nodes are reduced sufficiently, and hereafter the computer memory is less required. Most important is that the computing accuracy with the second-level forward star scheme can be largely improved over those with the first level of forward star scheme applied in the multistage TSPM scheme.     

Influence of cavity shape on hydrodynamic noise by a hybrid LES-FW-H method

The flow past various mechanical cavity, which is a common structure on the surface of the underwater vehicle, and generating hydrodynamic noise has attracted considerable attention in recent years. In this paper, a hybrid method is presented to investigate the hydrodynamic noise induced by mechanical cavities with various shapes. With this method, the noise sources in the near wall turbulences or in the wake are computed by the large eddy simulation (LES) and the generation and propagation of the acoustic waves are solved by the Ffowcs Williams-Hawkings (FW-H) acoustic analogy method with acoustic source terms extracted from the time-dependent solutions of the unsteady flow. The feasibility and reliability of the current method was verified by comparing with experimental data (Wang, 2009). The 2D cavity models with different cross-section shapes and 3D cavity models with different cavity mouth shapes (rectangular and circular) are developed to study the influence of cavity shape on the hydrodynamic noise. By comparing the flow mechanisms, wall pressure fluctuations, near-field and far-field sound propagation distributions, it is found that the quadrangular cavity with equal depths of leading-edge and trailing-edge is preferred for its inducing lower hydrodynamic noise than the cylindrical cavity does.     

吉林东部盆地群早白垩世原型盆地恢复

通过区域地质、电法和地震资料等对吉林东部盆地群早白垩世地层、沉积和构造特征进行研究,从而恢复沉积古地理及原型盆地面貌,结合现今勘探成果与原型盆地控制烃源岩展布,残留盆地改造情况,预测有利勘探区。研究结果表明: 该区早白垩世原型盆地为一大型陆相湖盆的一部分,果松组-鹰嘴砬子组沉积期为初始裂陷孤立盆地发展阶段,林子头组沉积期为断坳转换期,沙河子组- 营城组沉积期为统一的坳陷盆地,至登娄库组沉积期原型盆地完全遭到破坏,泉头组沉积期各盆地进入独立发展阶段。靠近原型盆地湖盆中心的( 扇) 三角洲相、河流相及湖沼相沉积区且位于现今盆地的凹陷区是吉林东部盆地群的有利油气勘探区。     

3-D Non-linear Travel-time Tomography: Imaging High Contrast Velocity Anomalies

In this paper we present an approach for 3-D travel-time tomography, which works well in reconstructing high contrast velocity anomalies in both location and strength. It uses a revised ‘irregular’ approach to the shortest-path method as the ray tracer and a damped minimum norm, and constrained least-squares CG approach as the inversion solver. In ray tracing, the advantages of the revised ‘irregular’ over the ‘regular’ approach are that the secondary nodes introduced on the cell surfaces significantly improve accuracy of computed travel times, without dramatically increasing the total number of cells and nodes; the tri-linear velocity function defined across the cell guarantees accurate ray tracing in a high velocity contrast medium; and the capacity to calculate a relatively large 3-D model, due to the fast run speed (at least one order of magnitude over the ‘regular’ approach) and less number of total nodes. The introduction of ‘soft’ and ‘hard’ bounds into the inversion process changes the conditioning and makes the solution meaningful in a physical sense. Thus the artifacts caused by noise and high velocity contrasts are substantially suppressed and the image quality is considerably improved, making the solution realistic with noisy or inconsistent travel-time data. Several numerical tests indicate that we can obtain good quality images even for high velocity contrast anomalies (say more than 20%) in the target region. This means the inversion algorithm is an efficient and effective procedure. Meanwhile, the inversion procedure is not very sensitive to the quality of the travel-time data, which is promising for practical usage.     

国内外油砂资源研究现状

介绍了油砂的概念,世界范围内的资源量及其主要分布.中国油砂资源相当丰富,主要分布在四类盆地中西部挤压盆地,东部伸展盆地,中部过渡型盆地及南部地台盆地.依据油砂形成的构造背景,我国可分为西部挤压盆地油砂、东部伸展盆地油砂、中部过渡型盆地油砂和南部地台盆地油砂.新一轮全国油砂资源评价结果表明,中国油砂资源量达到4.0×1010桶.中国油砂资源潜力较大,可能是不久将来重要的替代能源之一.     

315国道勘察设计中的洪水研究

315国道依吞布拉克—若羌段水毁灾害问题十分突出,为配合公路改建工程的勘察计,通过对水毁路段野外勘测,在获取沿线主要河流的历史洪水信息基础上,分3种方案分析计算了既定控制节点历史洪水洪峰流量,并确定了历史洪水重现期。在此基础上,采用多种方法计算了控制节点设计洪峰流量和设计洪水位,经分析论证后推荐选用其合理的计算成果作为公路设计的基础依据。本次研究所提出的小汇水区设计洪水计算技术路线和方法为公路、铁路、水利等部门开展类似流域设计洪水分析计算提供了有益的借鉴。