Petrographische und Kalium-Argon-Untersuchungen an basischen tertiären Vulkaniten zwischen Westerwald und Vogelsberg

Between the upper tertiary volcanic areas of Westerwald and Vogelsberg (central Western Germany) occur more than 40 isolated tertiary volcanic dikes, eroded necks, plugs and domes. Twelve of these volcanic rocks have been investigated petrographically and chemically and classified by means of their modal and chemical composition. Additional modal analyses have been performed on seven other volcanics. On seventeen volcanic occurences K-Ar-whole rock age determinations have been made. The K-Ar age determinations yield- with the exception of an olivine-nephelinite — values between 27 and 15 Ma. Regarding the known intervals of volcanic activities of the Westerwald- and Voge1sberg-areas, most of the examined volcanics can be related genetically with one of the adjacent volcanic areas. There seems to be no geographical overlapping of volcanics showing Westerwaldages and Vogelsberg-ages. A possible influence of excess-Ar-bearing phases (e. g. mantle xenoliths) and an Ar-loss of constituent matter of the groundmass have been estimated by additional age determinations of enriched samples. These influences — partially compensating each other — may shift the K-Ar whole rock age to a maximum of 5 % and thus do not exceed the dimension of the standard deviations. A distinct NNE-SSW-striking fault in the region between Marburg and Gießen is situated parallel with the eastern border of the “Rheinisches Schiefergebirge”. Volcanics showing Westerwald-age and Vogelsberg-age respectively reach this fault, but obviously do not overlap it. Relations between rock-type an rock age, as it has been observed for the volcanics of the northern Hessian Depression (Kreuzer et al. 1973;Wedepohl 1982) cannot be proved certainly. On the other hand, similar to the basaltic rocks of the northern Hessian Depression, the youngest volcanic product is an olivine-nephelinite (9 Ma).     

Solar and meteoritic abundance of silicon

Recent lifetime measurements on excited electronic states of neutral silicon (Beckeret al., Phys. Lett. In press, 1980) lead to a reassessment of widely used experimental transition probabilities Garz, Astron. Astrophys., 26, 471–477, 1973 of Si I lines. This translates into a 25% downward revision of the Si abundance determined from the solar spectrum.A solar atomic ratio, Si/Ca = 15.5 is inferred. This value coincides with that found in carbonaceous chondrites, but contrasts with ordinary and enstatite chondrites.     

Regolith Surface Reflectance: A New Attempt to Model

The reflectance coefficient of the regolith layer of celestial bodies has been studied in relation to the physical properties of regolith particles (size, refractive index, and packing density) on the basis of an accurate numerical radiative-transfer algorithm for a semi-infinite flat layer. Using the geometric-optics approximation, we have found that a shape mixture of randomly oriented spheroids can successfully model the single-scattering phase function of independent soil grains. In order to take into account the effect of packing density in a regolith layer, the concept of the so-called static structure factor was used. The main effect of increasing packing density is to suppress the forward-scattering peak of the phase function and to increase the albedo of the reflecting surface. We also investigated the influence of fine dust on the reflected light. An addition of small particles not only increases the surface albedo, but also changes the brightness profile and enhances the backscattering. Although the problem of unique solution, which is inherent in the retrieval of the properties of a medium from the measurements of the intensity of light scattered by this media, cannot be removed in the proposed model, the procedure used here, in contrast to widely used approximations, allows us to fit observational data with a set of real characteristics of the regolith. Semiempirical approaches are able to fit the measurements well with a small number of free parameters, but they do not explicitly contain crucial physical characteristics of the regolith such as grain sizes or the refractive index. We compared the numerical solution of the radiative-transfer equation with the Hapke approximation, which is most often used by investigators. The errors introduced by the Hapke model are small only for near-isotropic scattering by isolated particles. However, independent regolith grains are known to scatter light mainly in the forward direction.     

Phosphorus removal in low alkalinity secondary effluent using alum

The alkalinity plays an important role in phosphorus removal using coagulant. The dosage of coagulant in the low alkalinity wastewater is limited due to rapid pH changes. In the present study, a series of jar test was conducted using low alkalinity wastewater (50 mg/L) to evaluate the optimum pH, dosage and performance parameters (slow mixing and settling time) for the common coagulant alum. From the experiment, it was found that the dosage of coagulant and removal of phosphorus depend upon the pH of the wastewater after adding coagulant. The final optimum pH for efficient P removal was found to be within the range of 5.7–5.9. This range acts as an indicator and it is the maximum tolerable pH range for phosphorus removal for low alkalinity wastewater. The optimum time for slow mix and settling was found to be 20 min. The optimum mole ratio of alum to remove one mole of phosphorous was found to be 2.3. The alum coagulation at pH 7 produced effluent with the total residual phosphorus and reactive phosphorus content of 0.3 and 0.9 mg/L, respectively.     

How to assess hydromorphology? A comparison of Ukrainian and German approaches

Recently, the Ukrainian Western Bug water authorities developed a national field survey to assess the quality of river habitats. The Ukrainian government already cooperates with EU member states along transboundary rivers and also orientates itself towards the European Water Framework Directive (WFD). As a future application for EU membership is feasible, the water authorities started to implement WFD criteria into their national survey schemes including the assessment of rivers’ hydromorphology. This article compares two different hydromorphological survey methods to identify similarities and differences of the classification approaches with regard to the conformity of obtained outputs with the WFD demands. The field surveys, the Ukrainian (UA-FS) and the German (LAWA-FS), were applied in parallel on 14 river sections along the Western Bug River and parts of its tributaries. Results show a wide range of conformity, but also several differences between and gaps within all methods. The UA-FS generally lacks the idea of reference condition in rivers’ hydromorphology and the definition of different stream types or near-natural land uses. The UA-FS and the LAWA-FS approaches are similar with respect to their incorporated compartments and most main parameters, but differ in definition and interpretation of specific functional units and single parameters. Greatest similarities down to single parameters exist in aspects of land use, bank vegetation, currents diversity, and within-stream variation of water depths. Differences include the assessment and interpretation of lateral erosion, sinuosity, type and depth of profile, substrate diversity, as well as special structures of bank and riverbed. Overall, the LAWA-FS is more conservative in its rating than the UA-FS. Still, UA-FS can be regarded as an important improvement for a systematic and reliable monitoring of river hydromorphology in the Ukraine that will help to successfully engage with both the integrated water resources management and the WFD harmonisation process in the future.     

Flow of groundwater with variable density and viscosity, Atikokan Research Area, Canada

 Flow of groundwater with variable density and viscosity was simulated at the Atikokan Research Area (ARA) in northwestern Ontario, Canada. An empirical viscosity–concentration equation was modified to include total-dissolved-solids (TDS) data from the ARA. The resulting equation was used successfully to estimate reasonably accurate viscosity values over the expected range of temperature and concentration, in comparison with experimental values derived for sodium chloride solutions. A three-dimensional finite-element code, MOTIF, developed by Atomic Energy of Canada Limited, was used in the simulations. The inclusion of the effects of depth-increasing temperature and TDS-dependent fluid-density distribution, while maintaining only a temperature-dependent viscosity relationship in a simulation, resulted in a more penetrative flow against expected buoyancy effects (i.e., the physics of the system was not honored). Accounting for concentration in the viscosity equation caused water to be less penetrative and more in accordance with the expected physics of the system. A conclusion is that fluid concentration should be considered simultaneously in calculating the density and viscosity of a fluid during modeling of variable-density flow in areas underlain by fluids with high TDS. Results of simulations suggest that both flow directions and magnitudes should be employed simultaneously during the calibration of a model. Large-scale groundwater movement in the ARA may be analyzed with carefully selected vertical no-flow boundaries. By incorporating the geothermal temperature gradient, groundwater recharge increases by 12%; thus, this gradient plays a significant role in groundwater flow at the ARA. Variability in the fluid concentration at the ARA neither decreases nor increases recharge into the groundwater system. The hypothesis that an isolated continuous regional flow system may exist at depth in the ARA is not supported by these simulations. Received, September 1996 Revised, September 1997, February 1998 Accepted, February 1998     

Mapping of suspended sediments using site specific seasonal algorithms

This article reports a preliminary work in which two site specific seasonal algorithms have been proposed for estimating the suspended sediments concentration (SSC) from the digital numbers recorded on Indian Remote sensing Satellite, IRS-P4 Ocean Colour Monitor (OCM) sensor. For estimation of SSC, the proposed algorithms utilize dark pixel deduction atmospheric correction technique. The computations are performed with respect to north east monsoon phase situations of Palk Strait coastal stretch. The algorithms performance was satisfactory during the north east monsoon period. Although the results obtained cannot be generalized, we suggest that the authority of proposed algorithms can be extended to other seasons with the addition of more temporal experimental validation data sets and with numeric constants adjusted to present existing conditions. (As this area was severely affected by Tsunami, it may have dissimilar conditions at present).     

Lead isotopes of the carbonate-hosted Kabwe, Tsumeb, and Kipushi Pb-Zn-Cu sulphide deposits in relation to Pan African orogenesis in the Damaran-Lufilian Fold Belt of Central Africa

Lead isotope ratios of galena from the carbonate-hosted massive sulphide deposits of Kabwe (Pb-Zn) and Tsumeb (Pb-Zn-Cu) in Zambia and Namibia, respectively, have been measured and found to be homogeneous and characteristic of upper crustal source rocks. Kabwe galena has average isotope ratios of ^206/204Pb = 17.997 ± 0.007, ^207/204Pb = 15.713 ± 0.010 and ^208/204Pb = 38.410 ± 0.033. Tsumeb galena has slightly higher ^206/204Pb (18.112 ± 0.035) and slightly lower ^207/204Pb (15.674 ± 0.016) and ^208/204Pb (38.276 ± 0.073) ratios than Kabwe galena. The isotopic differences are attributed to local differences in the age and composition of the respective source rocks for Kabwe and Tsumeb. The homogeneity of the ore lead in the two epigenetic deposits suggests lead sources of uniform isotopic composition or, alternatively, thorough mixing of lead derived from sources with relatively similar isotopic compositions. Both deposits have relatively high ²³⁸U/²⁰⁴Pb ratios of 10.31 and 10.09 for Kabwe and Tsumeb galenas, respectively. These isotope ratios are considered to be typical of the upper continental crust in the Damaran-Lufilian orogenic belt, as also indicated by basement rocks and Cu-Co sulphides in stratiform Katangan metasediments which have a mean μ-value of 10.25 ± 0.12 in the Copperbelt region of Zambia and the Democratic Republic of Congo (formerly Zaire). The ²³²Th/²⁰⁴Pb isotope ratios of 43.08 and 40.42 for Kabwe and Tsumeb suggest Th-enriched source regions with ²³²Th/²³⁵U (κ-values) of 4.18 and 4.01, respectively. Model isotopic ages determined for the Kabwe (680 Ma) and Tsumeb (530 Ma) deposits indicate that the timing of the mineralisation was probably related to phases of orogenic activity associated with the Pan-African Lufilian and Damaran orogenies, respectively. Galena from the carbonate-hosted Kipushi Cu-Pb-Zn massive sulphide deposit in the Congo also has homogeneous lead isotope ratios, but its isotopic composition is comparable to that of the average global lead evolution curve for conformable massive sulphide deposits. The μ (9.84) and κ (3.69) values indicate a significant mantle component, and the isotopic age of the Kipushi deposit (456 Ma) suggests that the emplacement of the mineralisation was related to a post-tectonic phase of igneous activity in the Lufilian belt. The isotope ratios (^206/204Pb, ^207/204Pb, ^208/204Pb) of the three deposits are markedly different from the heterogeneous lead ratios of the Katangan Cu-Co stratiform mineralisation of the Copperbelt as well as those of the volcanogenic Nampundwe massive pyrite deposit in the Zambezi belt which typically define radiogenic linear trends on lead-lead plots. The host-rock dolomite of the Kabwe deposit also has homogeneous lead isotope ratios identical to the ore galena. This observation indicates contamination of the Kabwe Dolomite Formation with ore lead during mineralisation. Received: 8 September 1997 / Accepted: 21 August 1998