Submarine flank eruption preceding caldera subsidence during the 2000 eruption of Miyakejima Volcano, Japan

During the early part of a seismic swarm preceding eruption and caldera formation at Miyakejima Volcano, discoloured sea surfaces were observed 1.5 km off the western coast of Miyakejima on 27 June 2000. A later survey of the area using a multi-beam side scan sonar and a remotely operated small submarine revealed four craters of 20–30 m diameter aligned east-west in a 100×10–30 m area on the seafloor, with hot water at 140°C being released from one of the centres. Each crater consists of submarine spatter overlain in part by scoria lapilli. Dredged spatter from the craters was fresh, and there was no evidence of activity of marine organisms on the spatter surface, indicating that the discoloured sea surface resulted from magmatic eruption on the seafloor. This eruption occurred when a westward-propagating seismic swarm, initiated beneath Miyakejimas summit, passed through the area. Finding new magma on the seafloor demonstrates that this seismic swarm was associated with intruding magma, moving outward from beneath Miyakejima. Submarine spatter shows flattened shapes with a brittle crust formed by cooling in water, and its composition is aphyric andesite of 54 wt% SiO₂. The spatter is similar in whole rock and mineral composition to spatter erupted in 1983. However, the wide range of Cl in melt inclusions in plagioclase of the 27 June submarine spatter shows that it is not simply a remnant of the 1983 magma, which has only high Cl melt inclusions in plagioclase. The mixed character of melt inclusions suggests involvement of a magma with low Cl melt inclusions. The magma erupted explosively on 18 August from Miyakejimas summit, considered as the second juvenile magma in this eruption, contains low Cl melt inclusions in plagioclase. Based on these observations and the eruption sequence, we present the following model: (1) A shallow magma chamber was filled with a remnant of 1983 magma that had evolved to a composition of 54–55 wt% SiO₂. (2) Injection of the 18 August magma into this chamber generated a mixed magma having a wide range of Cl in melt inclusions contained plagioclase. The magma mixing might have occurred shortly before the submarine eruption and could have been a trigger for the initiation of the removal of magma from the chamber as an extensive dyke, which eventually led to caldera subsidence.Editorial responsibility: S Nakada, T Druitt     

Lower crustal seismic velocity-anomalies; magmatic underplating or serpentinized peridotite? Evidence from the Vøring Margin,NE Atlantic

On the Vøring volcanic passive margin offshore mid-Norway, NE Atlantic, a lower crustal body with P-wave velocities in the range of 7.1–7.7 km/s has been mapped by twenty two-dimensional Ocean Bottom Seismograph (OBS) profiles. The main aim of the present paper is to evaluate to what extent the lower crust is consistent with magmatic intrusions or serpentinized peridotite. The relatively low V _p/V _s ratios of 1.75–1.78 modelled for the lower crust under the continental part of the Vøring Plateau are consistent with mafic intrusions mixed with blocks of stretched continental crust, but not with the presence of partially serpentinized peridotites. The lower crustal high-velocity body is restricted to the area of the Late Cretaceous/Early Tertiary rift that lead to continental break-up in Early Eocene. The same model can explain the observations in the northern Vøring Basin, but in the central and southern Vøring Basin the seismic velocities do not preclude a model involving serpentinized peridotite in addition to intrusions and continental remnants. On the west Iberia non-volcanic margin a similar layer is interpreted as serpentinized peridotite. The existence of Moho reflections, the observation of S-wave anisotropy but absence of P-wave anisotropy, uncertainties regarding supply of water to allow for significant serpentinization and very low stretching factors compared with the west Iberia Margin, are among factors that argue against the presence of serpentinized peridotite in the Vøring Basin.     

Characteristics of deep currents off Cape Shiono-misaki before and after formation of the large meander of the Kuroshio in 1981

Deep currents measured by moored current meters over the shelf-slope off Cape Shiono-misaki, Kii Peninsula during the period from 28 April, 1981 to 4 May, 1982 are analyzed to determine characteristics of the deep current before and after the large meander of the Kuroshio formed. The observed deep currents show some different characteristics between the periods before and after the formation of the large meander of the Kuroshio,i.e.:

1. The mean current direction over the shelf slope changed to westward after the meander was formed, though it was eastward at two offshore stations before the meander was formed.
2. The eddy kinetic energy, \(ke((\overline {u'^2 } + \overline {\upsilon '^2 } )/2)\) became large at all stations after the meander formed.
3. It appears that there were current variations in the period band shorter than 10 days which propagated offshore before the meander formed but inshore after the meander formed.
4. After the meander formed, the current variations with a period of O(25 days) were amplified at two of the three stations. The current variations in this period band showed high coherence among the three stations.

Data from tidal stations showed that sea level variations with a period of O(30 days) were also amplified along the south coast of Japan after the meander was formed. But sea level variations were not coherent with current variations in this period band.     

Photographic observations of deep-sea infaunal ophiuroids in Suruga Bay,central Japan: an application of a free-fall system of time-lapse cameras and current meters

Underwater observations of infaunal amphiurid ophiuroids were made at a depth of about 480 m in Suruga Bay, central Japan, using a free-fall system which consists of time-lapse stereo-photography units and current meters. The megabenthos fauna was characterized by the dominance of infaunal echinoderms; in particular, amphiurid ophiuroids were numerically dominant. The density and biomass of the amphiurids were 170 m^–2 and 37 g m^–2, respectively. They buried their discs in the sediment and extended their arm tips out of the sediment surface. They protruded 2.2 arms per individual on the average. Strong bottom currents were observed, and the average velocity was 12 cm sec^–1 at 4 m above the sea floor. No arm tip was observed to be raised vertically into the water column for suspension feeding utilizing the bottom current, and amphiurids were considered to be primarily a surface deposit feeder at the present site.     

Bottom currents in Nankai Trough and Sagami Trough

Mean flows and velocity fluctuations are described from direct measurements of bottom currents made at three stations across Nankai Trough and two stations in Sagami Trough from May 1982 to May 1984. Aanderaa current meters were moored 7 m above the bottom. The observed mean flows indicate a counter-clockwise circulation in Nankai Trough with current speeds of 0.9–2.1 cm sec^–1. The mean flows were larger on the slopes than on the flat bottom of the trough. The mean flows observed in Sagami Trough show an inflow into Sagami Bay which is considered to be a part of the Oyashio undercurrent from the north that flows along the eastern coast of Honshu. Velocity fluctuations with periods greater than 100 hr were less energetic in the troughs than those at a station west of Hachijo-jima Island. A highly energetic fluctuation with a period of 66.7 hr was observed on the northern slope of Sagami Trough in the velocity component parallel to the trough axis. A maximum current speed of 49 cm sec^–1 was observed in Sagami Trough.This study was sponsored by the Ministry of Education, Science and Culture, Japan.     

Measurements of ocean bottom pressure with a quartz sensor

Year long measurements of bottom pressure were made at 2,036 m depth in Sagami Trough, at 2,538 m depth in Suruga Trough, and at 32 m depth in the south of Minami-Daitojima Island. Amplitudes and phase lags of the major constituents of tides were estimated by the response method, and they were compared with the observational results at several tide stations operated by the Japan Meteorological Agency. A comparison with Schwiderski's global models for the eight tidal constituents showed that the amplitudes were in good accordance to one another within 3 cm, and that the differences of phase lags were less than 15°. The largest portion of the variations of the bottom pressure was caused by the tides: the variance of the major eight constituents was more than 98.5% as large as the total variance. The measurements show that tidal waves can be recorded offshore with a sufficient accuracy by the quartz sensors. Drifts of indication of the pressure gauges were significant and they prevented detection of a long-term variation which might be caused by fluctuations of the ocean currents or by the eddies.     

Vertical vibration isolator having piecewise‐constant restoring force

We present a vertical vibration isolator having a piecewise‐constant restoring force, which belongs to a class of passive and nonlinear vibration isolators. In vertical vibration isolation, direct use of low‐stiffness elements leads to unacceptably large deformations due to self‐weight. To overcome the difficulty, we apply a combination of constant‐force springs, each of which sustains a constant load regardless of its stretch. By arranging the constant‐force springs, so that the isolator has a piecewise‐constant restoring force, we alleviate the problem of the excessive deformation caused by self‐weight, provide stability at the static equilibrium state along with the self‐centering capability, and realize a large stroke while keeping the mechanism simple and compact. Further, we attempt to limit the response acceleration within a tolerance regardless of the frequency spectrum and the magnitude of earthquake ground motions. We demonstrate the effectiveness of the present isolator through shaking table tests and numerical simulations. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of Long-period Ground Motions from the Nankai Trough, Japan, Earthquakes: Observations and Computer Simulation of the 1944 Tonankai (Mw 8.1) and the 2004 SE Off-Kii Peninsula (Mw 7.4) Earthquakes

Strong ground motions recorded in central Tokyo during the 1944 Tonankai Mw8.1 earthquake occurring in the Nankai Trough demonstrate significant developments of very large (>10 cm) and prolonged (>10 min) shaking of long-period (T > 10–12 s) ground motions in the basin of Tokyo located over 400 km from the epicenter. In order to understand the process by which such long-period ground motions developed in central Tokyo and to mitigate possible future disasters arising from large earthquakes in the Nankai Trough, we analyzed waveform data from a dense nation wide strong-motion network (K-NET and KiK-net) deployed across Japan for the recent SE Off-Kii Peninsula (Mw 7.4) earthquake of 5 September 2004 that occurred in the Nankai Trough. The observational data and a corresponding computer simulation for the earthquake clearly demonstrate that such long-period ground motion is primarily developed as the wave propagating along the Nankai Trough due to the amplification and directional guidance of long-period surface waves within a thick sedimentary layer overlaid upon the shallowly descending Philippine Sea Plate below the Japanese Island. Then the significant resonance of the seismic waves within the thick cover of sedimentary rocks of the Kanto Basin developed large and prolonged long-period motions in the center of Tokyo. The simulation results and observed seismograms are in good agreement in terms of the main features of the long-period ground motions. Accordingly, we consider that the simulation model is capable of predicting the long-period ground motions that are expected to occur during future Nankai Trough M 8 earthquakes.     

Simple DEM-Based Methods to Delineate Channel Networks for Hydrogeomorphological Mapping

To delineate channel networks from DEMs regardless of landform type, this article proposes a new method using slope-weighted flow accumulation. To validate the method, SRTM-3, a global DEM dataset with a resolution of approximately 90 m, was used for analysis of the Loess Plateau, China. Channel networks delineated with and without slope-weighted flow accumulation were derived in both uplands and hilly lands for comparison. In the weighted flow accumulation method, the thresholds for delineating the channels were defined by detecting a turning point in the frequency distribution of the weighted flow accumulation function or by visual similarity with drainage channels extracted from topographic maps. The channel networks delineated with weighting showed closer correlation with a topographic map than the channel networks without weighting, despite the differences in thresholds. Moreover, the channel networks delineated with weighting represented the differences between landform types, while the channel networks without weighting did not. Weighting on the basis of the slope angle shows promise as a general channel delineation method which reflects the actual topography due to its hydrogeomorphological functions.     

High-Reflectivity Coatings for a Vacuum Ultraviolet Spectropolarimeter

Precise polarization measurements in the vacuum ultraviolet (VUV) region are expected to be a new tool for inferring the magnetic fields in the upper atmosphere of the Sun. High-reflectivity coatings are key elements to achieving high-throughput optics for precise polarization measurements. We fabricated three types of high-reflectivity coatings for a solar spectropolarimeter in the hydrogen Lyman-\(\upalpha \) (Ly\(\upalpha \); 121.567 nm) region and evaluated their performance. The first high-reflectivity mirror coating offers a reflectivity of more than 80 % in Ly\(\upalpha \) optics. The second is a reflective narrow-band filter coating that has a peak reflectivity of 57 % in Ly\(\upalpha \), whereas its reflectivity in the visible light range is lower than 1/10 of the peak reflectivity (\(\sim 5~\%\) on average). This coating can be used to easily realize a visible light rejection system, which is indispensable for a solar telescope, while maintaining high throughput in the Ly\(\upalpha \) line. The third is a high-efficiency reflective polarizing coating that almost exclusively reflects an s-polarized beam at its Brewster angle of 68° with a reflectivity of 55 %. This coating achieves both high polarizing power and high throughput. These coatings contributed to the high-throughput solar VUV spectropolarimeter called the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP), which was launched on 3 September, 2015.