Ouachita, Appalachian, and Ancestral Rockies deformations recorded in mesoscale structures on the foreland Ozark plateaus

Mesoscale structures in Paleozoic rocks of the Ozark plateaus reveal four Pennsylvanian deformation episodes in midcontinent North America. The two earliest episodes can be assigned to progressive northwestward docking of the Ouachita terrane with North America. Early extensional structures (Event 1) indicate a northwest/southeast maximum horizontal stress (Hmax) during Early Pennsylvanian Ouachita terrane advance. Event 2 extensional and strike-slip structures indicate Hmax across the Ozark plateaus that varies systematically from north-northwest/south-southeast in the south to northeast/southwest in the north. This suggests development of a slip-line deformation field in response to minor northeastward lateral escape of lithospheric blocks away from the northwestward-moving Ouachita terrane's leading edge, which acted as an indenter in western Arkansas, southeastern Oklahoma, and Texas. Younger contractional and strike-slip structures of Event 3 indicate northeast/southwest Hmax across the entire Ozark plateaus, and deformation orientation and intensity are not readily assigned to Ouachita foreland deformation and may be related to Middle Pennsylvanian Ancestral Rockies contractional deformation. Finally, Event 4 contractional structures indicate northwest/southeast Hmax consistent with southern Appalachian late stage convergence.Deformation episodes are localized along basement fault zones, particularly at major bends, suggesting minor restraining-bend uplifts along strike-slip faults. Geometries of conjugate normal fault and hybrid shear joint arrays indicate localized areas of high differential stress consistent with basement block uplift at these bends. High-angle faults reactivated in a reverse sense and bedding-parallel veins suggest tensile minimum stresses and pore fluid pressures exceeding lithostatic stress, consistent with brine pulses driven into the midcontinent during Late Paleozoic orogeny (as proposed by other authors).     

Assessment of the Pacific decadal oscillation’s contribution to the occurrence of local torrential rainfall in north China

On 21–22 July 2012, torrential rains hit North China, with the daily precipitation record at Beijing station reaching 160.6 mm; this event is named the Beijing 7–21 case. This paper assesses the likelihood of the occurrence of local torrential rains, such as the Beijing 7–21 case, from the perspective of climate variability. In particular, the influence of the Pacific Decadal Oscillation (PDO) is assessed. There were five extreme events, with daily precipitation records equal to or larger than 160.6 mm, at Beijing station during the period 1951–2012; all of these events happened during negative phases of the PDO. The present analysis indicates that precipitation events more extreme than the Beijing 7–21 case should happen more than once per decade during negative phases of the PDO, but only about once every four decades during positive PDO phases. The negative phase of the PDO is found to be associated with a much greater probability of daily records of southerly winds in North China during summer. Strong southerly summer monsoons are deemed favorable for increasing the occurrence of local extreme rainfall over North China.     

Crossing Filaments

Solar filaments show the position of large-scale polarity-inversion lines and are used for the reconstruction of large-scale solar magnetic field structure on the basis of Hα synoptic charts for the periods that magnetographic measurements are not available. Sometimes crossing filaments are seen in Hα filtergrams. We analyze daily Hα filtergrams from the archive of Big Bear Solar Observatory for the period of 1999 – 2003 to find crossing and interacting filaments. A number of examples are presented and filament patterns are compared with photospheric magnetic field distributions. We have found that all crossing filaments reveal quadrupolar magnetic configurations of the photospheric field and presume the presence of null points in the corona.     

Mapping the thickness of sediments in the Ljubljana Moor basin (Slovenia) using microtremors

The Ljubljana Moor basin is characterized by moderate bedrock topography and thicknesses of Quaternary lacustrine and fluvial sediments ranging from 0 to 200 m. More than 65 boreholes which reached the bedrock were drilled in the area, but their distribution in the basin is very uneven and some data from the boreholes uncertain. There are also no data on S-velocity distribution within the basin, but seismic refraction measurements pointed out a rather uniform increase of P-velocity with depth, great impedance contrast with the bedrock and relatively small lateral velocity variations. The microtremor horizontal-to-vertical spectral ratio (HVSR) method was therefore applied as a complementary tool to seismic refraction survey to map the thickness of sediments. First, microtremors were measured at the locations of boreholes which reached the bedrock and the resonance frequencies determined. The inverse power relationship between the resonance frequency and the thickness of sediments was then determined from 53 data pairs. The quality of the correlation is moderate due to possible heterogeneities in sediments and possible 3D effects in some minor areas, but the obtained parameters correspond well to the values obtained in six other European basins. Secondly, a 16 km-long discontinuous seismic refraction profile was measured across the whole basin, leaving uncovered some larger segments where active seismic measurements were not possible. Microtremors were then measured at 64 locations along the same profile, using 250 m point spacing, without leaving any gaps. The frequency–thickness relationship was used to invert resonance frequencies to depths. These were first validated using the results of the seismic refraction survey, which showed good agreement, and finally used for interpolation in the segments of missing refraction data to obtain a continuous depth profile of the bedrock. The study has shown that the microtremor method can be used as a complementary tool for mapping the thickness of unconsolidated sediments also in areas characterized by moderate bedrock topography. As the input data are always to some extent uncertain, it is important to have a sufficiently large number of borehole data to establish a frequency–thickness relationship, as well as some additional independent geophysical information for its validation.     

Correlation between molecular absorption spectral slope ratios and fluorescence humification indices in characterizing CDOM

Ultraviolet–visible absorption spectral slope ratios S_R (slope in 275–295 nm divided by slope in 350–400 nm) and humification index (HIX, integrated fluorescence emission in 435–480 nm divided by that in 435–480 and 300–345 nm) were compared when characterizing chromophoric dissolved organic matter (CDOM) in three humic acids and 44 whole water samples. HIX increased with increasing pH for humic acids, while their S_R showed much more complicated dependencies on pH. There was a negative correlation between S_R and HIX. S_R increased in the order terrestrial coal/peat < terrestrial soil/river < seawater, while HIX increased in the order seawater < terrestrial soil/river < terrestrial coal/peat. The comparative study in this work indicates that terrestrially derived CDOM has higher HIX and lower S_R than marine CDOM. Investigators may potentially use these two indices to compare qualitatively the character of CDOM in different sources (e.g., terrestrial vs. marine).     

Position-domain integrity risk-based ambiguity validation for the integer bootstrap estimator

Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance.     

The extension of the parametrization of the radio source coordinates in geodetic VLBI and its impact on the time series analysis

The radio sources within the most recent celestial reference frame (CRF) catalog ICRF2 are represented by a single, time-invariant coordinate pair. The datum sources were chosen mainly according to certain statistical properties of their position time series. Yet, such statistics are not applicable unconditionally, and also ambiguous. However, ignoring systematics in the source positions of the datum sources inevitably leads to a degradation of the quality of the frame and, therefore, also of the derived quantities such as the Earth orientation parameters. One possible approach to overcome these deficiencies is to extend the parametrization of the source positions, similarly to what is done for the station positions. We decided to use the multivariate adaptive regression splines algorithm to parametrize the source coordinates. It allows a great deal of automation, by combining recursive partitioning and spline fitting in an optimal way. The algorithm finds the ideal knot positions for the splines and, thus, the best number of polynomial pieces to fit the data autonomously. With that we can correct the ICRF2 a priori coordinates for our analysis and eliminate the systematics in the position estimates. This allows us to introduce also special handling sources into the datum definition, leading to on average 30 % more sources in the datum. We find that not only the CPO can be improved by more than 10 % due to the improved geometry, but also the station positions, especially in the early years of VLBI, can benefit greatly.     

Upscaling permeability for three-dimensional fractured porous rocks with the multiple boundary method

Upscaling permeability of grid blocks is crucial for groundwater models. A novel upscaling method for three-dimensional fractured porous rocks is presented. The objective of the study was to compare this method with the commonly used Oda upscaling method and the volume averaging method. First, the multiple boundary method and its computational framework were defined for three-dimensional stochastic fracture networks. Then, the different upscaling methods were compared for a set of rotated fractures, for tortuous fractures, and for two discrete fracture networks. The results computed by the multiple boundary method are comparable with those of the other two methods and fit best the analytical solution for a set of rotated fractures. The errors in flow rate of the equivalent fracture model decrease when using the multiple boundary method. Furthermore, the errors of the equivalent fracture models increase from well-connected fracture networks to poorly connected ones. Finally, the diagonal components of the equivalent permeability tensors tend to follow a normal or log-normal distribution for the well-connected fracture network model with infinite fracture size. By contrast, they exhibit a power-law distribution for the poorly connected fracture network with multiple scale fractures. The study demonstrates the accuracy and the flexibility of the multiple boundary upscaling concept. This makes it attractive for being incorporated into any existing flow-based upscaling procedures, which helps in reducing the uncertainty of groundwater models.     

The Oeschinensee rock avalanche,Bernese Alps,Switzerland: a co-seismic failure 2300 years ago?

Landslide deposits dam Lake Oeschinen (Oeschinensee), located above Kandersteg, Switzerland. However, past confusion differentiating deposits of multiple landslide events has confounded efforts to quantify the volume, age, and failure dynamics of the Oeschinensee rock avalanche. Here we combine field and remote mapping, topographic reconstruction, cosmogenic surface exposure dating, and numerical runout modeling to quantify salient parameters of the event. Differences in boulder lithology and deposit morphology reveal that the landslide body damming Oeschinensee consists of debris from both an older rock avalanche, possibly Kandertal, as well as the Oeschinensee rock avalanche. We distinguish a source volume for the Oeschinensee event of 37 Mm³, resulting in an estimated deposit volume of 46 Mm³, smaller than previous estimates that included portions of the Kandertal mass. Runout modeling revealed peak and average rock avalanche velocities of 65 and 45 m/s, respectively, and support a single-event failure scenario. ³⁶Cl surface exposure dating of deposited boulders indicates a mean age for the rock avalanche of 2.3 ± 0.2 kyr. This age coincides with the timing of a paleo-seismic event identified from lacustrine sediments in Swiss lakes, suggesting an earthquake trigger. Our results help clarify the hazard and geomorphic effects of rare, large rock avalanches in alpine settings.     

Estimating areal production of intertidal microphytobenthos based on spatio-temporal community dynamics and laboratory measurements

In situ Microphytobenthic community dynamics were combined with laboratory measurement of predominant species by fluorescence methods to estimate the areal primary production. Field investigation of community dynamics of microphytobenthos (MPB) was conducted from August 2006 to August 2007 in intertidal flats of the Nakdong River estuary, Korea. MPB Biomass varied between 0.47 and 16.58 μg cm^?3 in the surface 1 cm sediment, with two dominant diatom species, Amphora coffeaeformis and Navicula sp., occupying average 77.2 ± 14.9% of total number of MPB cells. The biomass was higher in the slightly muddy sand sites than that in the sand site, and showed different pattern of seasonal variation. The profile of vertical distribution of biomass was an exponential decrease trend with depth in sediments. The biomass proportions in the uppermost 3 mm were 57.6% and 37.8% with and without the presence of biofilm, respectively. The two dominant species were cultured in laboratory, and their photosynthetic parameters, rETR_max (relative maximum electron transport rate), α (light utilization coefficient) and E _k (light saturation parameter) were derived from rETR (relative ETR)-irradiance curves by Imaging- PAM (pulse amplitude modulated) fluorometry. The rETR-irradiance curves showed no significant difference of photosynthetic activities between the two species. The areal potential production ranged from 0.74 to 2.22 g C m^?2 d^?1.