Cladoceran remains in lake sediments: a comparison between plankton counts and sediment records

To evaluate the comparability of neo- and paleo-limnology, we made year-to-year as well as seasonal comparisons of contemporary zooplankton data and cladoceran remains in thick (9–42 mm) annual laminations in sediment of Lake Vesijärvi, southern Finland. We calculated the expected annual exuviae production of nine planktonic taxa in the water column using contemporary zooplankton records, and compared the value to the observed net accumulation of their remains in deep sediment for 7 years. Although all of the species studied occur commonly in the lake pelagic zone, deposition of remains differed significantly among taxa. The observed accumulation of three Bosmina species and Chydorus sphaericus was similar to or exceeded expected values, suggesting good preservation of their remains as well as focusing of sediment into the deepest part of the lake. The accumulation of Limnosida and Leptodora remains exceeded expected values several fold, suggesting under-representation of these species in pelagic plankton samples, as well as efficient transportation and spatial averaging of their remains in the sediment. Daphnia, Diaphanosoma, and Ceriodaphnia were clearly under-represented in the sediment due to poor preservation of their remains and use of a 50-μm sieve in sediment processing. Thus, sieving should be taken into account as a possible source of bias. Correlation between relative abundances of all species in the sediment and in the plankton was weak (r _s = 0.54, P < 0.001), but for well-preserved species, the correlation was strong (r _s = 0.91, P < 0.001). Inter-annual variation in the deposition of remains suggested that resuspension and sediment focusing may vary between years, thus making it difficult to interpret absolute abundances, even though the deepest part of the basin shows clear varve formation and seasonality is well recorded. Detailed study of the uppermost lamination showed the seasonal succession of a cladoceran community within an annual varve as well as differences in the seasonality and intensity of ephippia production among the species. We recommend that results of cladoceran analyses be expressed in several ways (relative abundances, per unit dry weight, per unit organic matter, and as net accumulation values) before drawing final conclusions, as each approach may reveal a different aspect of the deposition process. In addition, sedimentation differences between epilimnetic and hypolimnetic species should be considered in stratified lakes.     

Micrometeorological Observations of a Microburst in Southern Finland

On the afternoon of 3 July 2004 in Hyytiälä (Juupajoki, Finland), convective cells produced a strong downburst causing forest damage. The SMEAR II field station, situated near the damage site, enabled a unique micrometeorological analysis of a microburst with differences above and inside the canopy. At the time of the event, a squall line associated with a cold front was crossing Hyytiälä with a reflectivity maximum in the middle of the squall line. A bow echo, rear-inflow notch, and probable mesovortex were observed in radar data. The bow echo moved west-north-west, and its apex travelled just north of Hyytiälä. The turbulence data were analysed at two locations above the forest canopy and at one location at sub-canopy. At 1412 EET (Eastern European Time, UTC+2), the horizontal and vertical wind speed increased and the wind veered, reflecting the arrival of a gust front. At the same time, the carbon dioxide concentration increased due to turbulent mixing, the temperature decreased due to cold air flow from aloft and aerosol particle concentration decreased due to rain scavenging. An increase in the number concentration of ultra-fine particles (< 10 nm) was detected, supporting the new particle formation either from cloud outflow or due to rain. Five minutes after the gust front (1417 EET), strong horizontal and downward vertical wind speed gusts occurred with maxima of 22 and 15 m s^?1, respectively, reflecting the microburst. The turbulence spectra before, during and after the event were consistent with traditional turbulence spectral theory.     

Effects of Arctic Sea Ice Decline on Weather and Climate: A Review

The areal extent, concentration and thickness of sea ice in the Arctic Ocean and adjacent seas have strongly decreased during the recent decades, but cold, snow-rich winters have been common over mid-latitude land areas since 2005. A review is presented on studies addressing the local and remote effects of the sea ice decline on weather and climate. It is evident that the reduction in sea ice cover has increased the heat flux from the ocean to atmosphere in autumn and early winter. This has locally increased air temperature, moisture, and cloud cover and reduced the static stability in the lower troposphere. Several studies based on observations, atmospheric reanalyses, and model experiments suggest that the sea ice decline, together with increased snow cover in Eurasia, favours circulation patterns resembling the negative phase of the North Atlantic Oscillation and Arctic Oscillation. The suggested large-scale pressure patterns include a high over Eurasia, which favours cold winters in Europe and northeastern Eurasia. A high over the western and a low over the eastern North America have also been suggested, favouring advection of Arctic air masses to North America. Mid-latitude winter weather is, however, affected by several other factors, which generate a large inter-annual variability and often mask the effects of sea ice decline. In addition, the small sample of years with a large sea ice loss makes it difficult to distinguish the effects directly attributable to sea ice conditions. Several studies suggest that, with advancing global warming, cold winters in mid-latitude continents will no longer be common during the second half of the twenty-first century. Recent studies have also suggested causal links between the sea ice decline and summer precipitation in Europe, the Mediterranean, and East Asia.     

Numerical modelling of heat shock-assisted rock fracture

This paper presents a numerical investigation on the effects of thermal shock as a pretreatment of rock prior to comminution. More specifically, the effect of heat shock-induced cracks on the uniaxial compressive strength of rock is numerically studied. The chosen constitutive model of rock employs a (strong) embedded discontinuity finite element formulation to describe cracks. The thermomechanical problem that governs the heat shock pretreatment of rocks is considered as an uncoupled problem because of a highly dominating role of the external heat influx. Two solution methods of the global problem are presented: an explicit-explicit dynamic scheme and an implicit-implicit quasi-static scheme. The model performance is tested in simulations on heterogeneous numerical rock samples subjected first to a heat shock pretreatment and then to a mechanical compression test. According to the results, the compressive strength of intact granite rock having the axial splitting failure mode can be substantially reduced by heat shock pretreatment.     

An Innovative Post Grouting Technique for Soil Nails

This study presents an innovative technique of executing soil nails called sectorized post grouting (SPG). The most utilized technique of soil nail grouting is gravity grouting, with the literature reporting advances in pressurized grouting. Although obtaining higher pullout resistance of soil nails, pressurized grouting, mostly done in single-stage grouting, does not compensate for exudation and its use in higher nail lengths is difficult. Thus, a technique has been developed that compensates for exudation, with easier application in lengthier nails. The technique was qualitatively assessed to evaluate its surface roughness and later applied in seven real soil nailing works, where it could be quantitatively assessed. The results show that sectorized post-grouted nails obtained greater pullout resistances than gravity grouted and single-stage grouted nails. Although similar improvement was found in tube-à-manchette (TAM) grouted nails, this method presents lower economic efficiency than sectorized post grouting. The pullout resistance results obtained in this study can be utilized in future soil nailing works executed utilizing SPG.

     

A dual-continuum model (TOUGH2) for characterizing flow and discharge in a mechanically disrupted sandstone overburden

Underground hard coal mining usually disrupts the mechanical equilibrium of rock sequences, creating fractures within minor permeable rocks. The present study employs a dual-continuum model to assess how both fractured and porous sandstone media influence the percolation process in postmining setups. To test the approach, the software TOUGH2 was employed to simulate laminar fluid flow in the unsaturated zone of the Ibbenbüren Westfield mining area. Compared to other coal mining districts in Germany, this area is delineated by the topography and local geology, leading to a well-defined hydrogeological framework. Results reveal good agreement between the calculated and measured mine water discharge for the years 2008 and 2017. The constructed model was capable of reproducing the bimodal flow behavior of the adit by coupling a permeable fractured continuum with a low-conductivity rock matrix. While flow from the fractured continuum results in intense discharge events during winter months, the rock matrix determines a smooth discharge limb in summer. The study also evaluates the influence of individual and combined model parameters affecting the simulated curve. A detailed sensitivity analysis displayed the absolute and relative permeability function parameters of both continua among the most susceptible variables. However, a strong a priori knowledge of the value ranges for the matrix continuum helps to reduce the model ambiguity. This allowed for calibration of some of the fractured medium parameters for which sparse or variable data were available. However, the inclusion of the transport component and acquisition of more site-specific data is recommended to reduce their uncertainty.

     

Using phytogeomorphology, cartography and GIS to explain forest site productivity expressed as tree height in southern and central Finland

Using geomorphological knowledge, spatial data and GIS methods, one can obtain phytogeomorphological site variables describing interactions between landforms and vegetation. We used 15 site variables derived from maps to explain forest site productivity in southern and central Finland expressed as dominant height of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies [L.] Karst.) with ages of 30–110 years. These site variables were grouped into two: Group 1 with seven variables describing geographical conditions of sites including climate, and Group 2 with eight variables describing local morphometric and soil properties. We calculated slope and aspect from a 25 × 25 m DEM. The catchment area, calcium content in soil, length of the growing season, radiation index, sea index, lake index, past highest shoreline and total annual temperature sum with threshold + 5 °C were also obtained. Then we classified the landforms of 688 sample plots into four major types and 15 sub-types. We applied regression analysis to explain the tree height as a function of the tree age and the phytogeomorphological site variables. When the tree height was explained with the tree age and the Group 1 variables, the remaining standard error of the model was 16.6–17.9%. When the Group 2 variables were added to the analysis, the standard error decreased slightly. The most significant variables were the temperature sum, latitude coordinate and length of the growing season. Other significant variables were elevation, slope and aspect. The major landform types, sub-types and watershed area did not explain the tree height. Furthermore, if the forest site types determined in the field were included, the remaining standard error decreased by ca. 2%, showing the importance of field information.     

Formation of Al-rich titanite (CaTiSiO4O–CaAlSiO4OH) reaction rims on ilmenite in metamorphic rocks as a function of fH2O and fO2

Reaction rims of titanite on ilmenite are described in samples from four terranes of amphibolite-facies metapelites and amphibolites namely the Tamil Nadu area, southern India; the Val Strona area of the Ivrea-Verbano Zone, northern Italy, the Bamble Sector, southern Norway, and the northwestern Austroalpine Ötztal Complex. The titanite rims, and hence the stability of titanite (CaTiSiO₄O) and Al–OH titanite, i.e. vuaganatite (hypothetical end-member CaAlSiO₄OH), are discussed in the light of fH₂O- and fO₂-buffered equilibria involving clinopyroxene, amphibole, biotite, ilmenite, magnetite, and quartz in the systems CaO–FeO/Fe₂O₃–TiO₂–SiO₂–H₂O–O₂ (CFTSH) and CaO–FeO/Fe₂O₃–Al₂O₃–SiO₂–H₂O–O₂ (CFASH) present in each of the examples. Textural evidence suggests that titanite reaction rims on ilmenite in rocks from Tamil Nadu, Val Strona, and the Bamble Sector originated most likely due to hydration reactions such as clinopyroxene + ilmenite + quartz + H₂O = amphibole + titanite and oxidation reactions such as amphibole + ilmenite + O₂ = titanite + magnetite + quartz + H₂O during amphibolite-facies metamorphism, or, as in the case of the Ötztal Complex, during a subsequent greenschist-facies overprint. Overstepping of these reactions requires fH₂O and fO₂ to be high for titanite formation, which is also in accordance with equilibria involving Al–OH titanite. This study shows that, in addition to P, T, bulk–rock composition and composition of the coexisting fluid, fO₂ and fH₂O also play an important role in the formation of Al-bearing titanite during amphibolite- and greenschist-facies metamorphism.