Modeling microclimate environments: A verification study

A numerical model is developed for simulating microclimate of plants and bare soil. The model evaluates heat, mass, momentum, and radiative fluxes in the soil-plant-atmosphere system. Its vertical domain may extend throughout the whole Planetary Boundary Layer (PBL). The model requires, either, temporal meteorological data of solar radiation, wind speed, air temperature and humidity measured over the field, or, when applied to the whole PBL, initial values of the latter three at its top. Vegetation parameters (leaf area index, photometric properties, root distribution and density) as well as soil texture, hydraulic and photometric properties are considered. The model was verified with meteorological data taken from two different climatological regions, above a bare soil and two cotton fields.For all case studies, observed and calculated values of air (except for within-canopy) and soil temperatures, wind speed, net radiation, and soil-, latent-, and sensible heat fluxes, agreed well with measurements.     

MODEL-BASED TRANSFORMATIONS OF COMMON MIDPOINT GATHERS1

A method for transforming Normal Moveout corrected CMP-gathers is proposed. The method is based upon the availability of a model of the CMP-gather. However, the transformation can be performed with any degree of accuracy in the model. Ideally the employed model should be a synthesis of all available a priori information about the particular data set. Mathematically the transformation is performed as follows. The CMP-gather is considered to be a matrix. This matrix is first decomposed into a set of submatrices of the same dimensions. Each submatrix consists of non-zero elements or samples with the same relative amount of noise. By reducing each of these submatrices to a vector (a trace) we get a new set of traces. This set then represents the transformed CMP-gather. The purpose of the transformation is to organize the CMP data in a form which makes it easier both to analyse the noise distribution and to take the necessary steps to improve the signal-to-noise ratio at the stacking stage. In principle the method incorporates the exploitation of multichannel recordings with the use of models. Several examples of transformed gathers and their applications to the improvement of real seismic data are shown.     

Fluid inclusion and stable isotope studies of Pb-Zn-fluorite-barite mineralization in the lower and middle Benue Trough,Nigeria

Lead-zinc-fluorite-barite veins in the lower and middle Benue Trough (Nigeria) are located within the Lower Cretaceous (Albian) carbonaceous shales, limestones, and arkosic sandstones of this intracontinental rift structure. The veins in the lower Benue Through consist of sphalerite + galena+marcasite ± chalcopyrite ± barite in a gangue of siderite and quartz hosted by carbonaceous shales, whereas in the middle Benue Trough, fluorite, barite, quartz, and similar sulfide minerals are hosted by limestone and sandstone. Fluid inclusion temperatures in vein minerals range from 95°C to 200°C (without pressure corrections) and salinities range from 14 to 24 equiv. wt% NaCl. Oxygen isotope compositions of limestone wall rocks (middle Benue) have been lowered from premineralization ¹⁸O values of about 25 per mil to approximately 16 per mil. Fluid in equilibrium with vein calcite has a calculated ¹⁸O of +2.6 per mil at 130°C. The ⁸⁷Sr/⁸⁶Sr ratio of this calcite (0.71497) suggests that strontium and calcium had a considerably more radiogenic source than the Cretaceous limestone or evaporite did (⁸⁷Sr/⁸⁶Sr=0.7073–0.7078). Observed strontium data, lead isotope compositions of galena, and REE patterns in fluorite suggest that the Lower Paleozoic basement rocks in the trough or their weathered equivalents are likely sources for the Benue Trough ore components. Sulfur isotope data suggest that the sulfur was probably contributed from the Cretaceous evaporites in the trough.Our data favor a basinal brine source for the ore-forming fluid. Fluid criculation probably resulted from high geothermal gradients accompanying continental rifting. Brine interaction with the clastic, carbonate, and evaporite rocks led to metal and sulfur leaching and later deposition in fractures accompanying the Cenomanian deformation and uplift in the Benue Trough.     

Partitioning data pertaining to Fe-Mg ordering around trace cations in olivine and low-Ca pyroxene

We have used trace element partitioning data available in the literature to investigate nonideality of the cations of Yb, Sm, Gd, Ca, Mn, Sc, Ni, and Al in silicate melt, olivine, and low-Ca pyroxene. Results are consistent with ordering of Mg and Fe around trace cations in olivine and pyroxene. On the basis of these data, we suggest there is an increasing tendency for Fe to congregate in the vincinity of the trace cation as the size of the trace cation increases. These results are important both in achieving a better understanding of trace element behavior in crystals and in constraining the temperature and compositional dependence of trace element partitioning.     

Subduction and back-arc activity at the Hikurangi convergent Margin,New Zealand

The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededM _s=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutM _s=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere.     

Hydrogeochemical assessment of groundwater quality in parts of the niger delta,Nigeria

Detailed hydrogeochemical analysis of several samples of groundwater collected from parts of the Niger Delta, Nigeria has been carried out in an effort to assess the quality of groundwater in the area. Results obtained showed the groundwater in the area to be enriched in Na⁺, Ca⁺⁺, Mg⁺⁺, Cl^–, HCO ₃ ^- , and SO ₄ ^-- . The concentration of these ions as well as such parameters as salinity, total hardness, and TDS are below the World Health Organization (WHO) standards for drinking water. The concentration of Ca⁺⁺ was found to be higher than Mg⁺⁺ except in some areas very close to the coast suggesting the encroachment of saltwater. This encroachment of saltwater is further indicated by the general increase in Cl^– and a decreased in HCO ₃ ^- content towards the coast and Na/Cl ratios. On the basis of the present hydrogeochemical studies, five groundwater types have been recognized to occur in the area of study. These are (1) Sodium-Calcium-Magnesium-Bicarbonate type (Na-Ca-Mg-5HCO₃), (2) Iron-Calcium-Bicarbonate type (Fe-Ca-4HCO₃), (3) Sodium-Calcium-Magnesium-Sulfate type ( ), (4) Iron-Chloride-Bicarbonate (Fe-Cl-HCO₃), and (5) Magnesium-Chloride type (Mg-2Cl). The assemblage of groundwater types in the area shows that both compound and single groundwater types occur. The geochemical characteristics of the groundwaters are thought to be closely related to the peculiar geologic and hydrologic conditions that prevail in the Niger Delta area of Nigeria.     

Biogenic and lithogenic magnetic minerals in Atlantic and Pacific deep sea sediments and their paleomagnetic significance

The carrier of the natural magnetization of deep sea sediments was characterized by mineralogical, electron microscopic, and rock magnetic investigations. Magnetic single domain (SD) and pseudo single domain (PSD) particles which are most important for the stable remanent magnetization were separated from the magnetic »coarse fraction« and concentrated as magnetic »fine fraction«. The magnetic coarse fraction consists of lithogenic magnetite and titanomagnetite, which often contains exsolution-lamellae of ilmenite. Both minerals are partially maghematized and occur isolated in the sediment or embedded in rock particles, in regionally different concentrations. The magnetic fine fraction consists of lithogenic magnetite and titanomagnetite and biogenic magnetite (magnetofossils = fossil bacterial magnetosomes), the latter generally maghematized.A graphical method is described which allows the classification and characterization of the magnetic fine fraction by demagnetization of the anhysteretic remanent magnetization (ARM) of whole sediment samples. Three groups with different magnetic properties can be distinguished, characterized by three ARM type-curves: Type A curves are associated with sediments from abyssal plaines. They show nearly identical ARM properties and are typical for magnetofossils.Type B curves are produced by sediments from the vicinity of volcanic regions. Their shapes are variable to a certain degree and indicate two lithogenic magnetic phases.Type C curves are found for sediments from submarine ridges and regions with input of terrigenous detritus. These curves have the largest deviations among each other indicating a magnetic multi-phase assemblage including magnetofossils.

---

Zusammenfassung Die Träger der Magnetisierung von Tiefseesedimenten wurden mineralogisch, elektronenmikroskopisch und gesteinsmagnetisch untersucht. Magnetische Eindomänen (SD) und Pseudo-Eindomänen (PSD) Partikel, die für eine stabile remanente Magnetisierung wichtig sind, wurden als magnetische »Feinfraktion« von der magnetischen »Grobfraktion« abgetrennt. Die magnetische Grobfraktion besteht aus lithogenem Titanomagnetit und Magnetit die teilweise maghemitisiert sind und teilweise auch Ilmenit-Entmischungslamellen aufweisen. In regional unterschiedlichen Konzentrationen liegen sie frei im Sediment oder in silikatischer Matrix eingebettet vor. Die magnetische Feinfraktion besteht sowohl aus lithogenem Titanomagnetit und Magnetit, als auch aus biogenem Magnetit (Magnetofossilien = fossile bakterielle Magnetosomen); letzterer ist größtenteils maghemitisiert.Es wird eine grafische Darstellungsmethode beschrieben, die anhand von Untersuchungen der anhysteretischen remanenten Magnetisierung (ARM) von Sedimentproben eine Charakterisierung der magnetischen Feinfraktion erlaubt. Es lassen sich dadurch drei Gruppen mit unterschiedlichen magnetischen Eigenschaften unterscheiden, die durch drei Gruppen von ARM-Kurventypen charakterisiert sind.Kurventyp A wird bei Sedimenten aus Tiefsee-Ebenen beobachtet. Die ARM-Daten sind nahezu identisch und zeigen ein Verhalten, wie es für Magnetofossilien typisch ist. Kurventyp B tritt bei Sedimenten aus dem Einzugsbereich vulkanischer Gebiete auf. Er zeigt eine größere Variation und die Form der Kurven spricht für ein System aus zwei lithogenen magnetischen Komponenten.Kurventyp C gehört zu Sedimenten aus submarinen Rücken und dem Einzugsgebiet terrigener Schüttungen. Die Kurvenverläufe sind uneinheitlich und sprechen für ein magnetisches Mehrkomponenten-System mit Beteiligung von Magnetofossilien.

---

Résumé Les minéraux porteurs du magnétisme dans les sédiments de mer profonde ont été explorés par les méthodes de la minéralogie, de la microscopie électronique et du magnétisme des roches. Les particules qui correspondent à un domaine magnétique unique (SD) et pseudo-unique (PSD), significatives pour un magnétisme rénanent stable, ont été concentrées comme «fraction magnétique fine» après séparation de la «fraction magnétique grossière». Cette dernière consiste en magnétite et titanomagnétite lithogéniques, qui renferment souvent des lamelles d'exsolution d'ilménite. Ces deux minéraux sont partiellement maghémitisés; ils se présentent isolés ou inclus dans des fragments de roches, avec des concentrations régionales diverses. La fraction magnétique fine consiste en magnétite et titanomagnétite lithogéniques, ainsi qu'en magnétite biogénique (magnétofossile = magnétosome fossile bactérien), cette dernière ordinairement maghemitisée.Les auteurs présentent une méthode graphique qui permet de caractériser la fraction magnétique fine à partir de l'examen du magnétisme rémanent anhystérique (ARM) de l'échantillon de sédiment. Cette méthode permet de distinguer trois groupes de propriétés magnétiques différentes, caractérisés par trois types de courbes ARM. Les courbes de type A caractérisent les sédiments de plaines abyssales; elles montrent des propriétés ARM presque identiques et sont typiques pour les magnétofossiles. Les courbes de types B sont fournies par les sédiments voisins des régions volcaniques; leurs formes varient dans une certaine mesure et indiquent un système à deux composants magnétiques lithogéniques. Les courbes de type C correspondent aux sédiments des crêtes sous-marines et des régions à apports terrigènes; ces courbes présentent entre elles des différences plus marquées, ce qui indique un système magnétique à composants multiples, comportant des magnétofossiles.

---

, - . (SD) (PSD) , , » « » «. . . , . , , . » « , , — , , ; . (ARM) , . , ARM. , . - , .

     

Intercomparison of NO column measurements during MAP/GLOBUS 1985

Column measurements of nitric oxide were made using several techniques during the MAP/GLOBUS campaign in France in September 1985. The data sets are nearly co-located and simultaneous, therefore allowing a valid intercomparison of the various measurement methods. The range of altitudes sampled differs from instrument to instrument. This complicates the comparison because the data sets are to some extent complementary. The NO distributions apparently vary significantly from day to day, and possibly over shorter timescales. Changes in dynamics may be responsible for these variations. The results from the instruments which measure in the infrared and the ultraviolet are self-consistent, and show good agreement with photochemical predictions. On 19 September, when the intercomparison was made, the profile measured by the in-situ chemiluminescent instrument differed significantly from the predicted profile, and the measured columns were generally higher.     

ON THE EFFECTS OF THICKNESS OF THE HALF-PLANE MODEL IN HLEM INDUCTION PROSPECTING OVER SULPHIDE DYKES IN A HIGHLY RESISTIVE MEDIUM1

In the quantitative data interpretation for HLEM induction prospecting, a vertical half-plane model in an insulating medium is widely employed. For this assumption to be valid, the steeply dipping massive sulphide dykes must have large strike lengths and depth extents, but small thickness. We report investigations, using the laboratory scale-modelling method, on the response variation of large vertical conductors as the thickness is varied. We conclude that a steeply dipping large dyke can be approximated by a half-plane model only if its thickness is less than half the skin depth. An inductively thick conductor produces larger amplitudes and relatively higher quadrature compared to a thin conductor, even if both have the same induction number.