Approaches to knowledge sharing and capacity building: The role of local information systems in marine and coastal management

This paper explores how coastal data and information can be mobilised in information systems and applied in coastal management. The concept of an Information System is defined and described, and the potential role of Local Information System (LIS) in integrated coastal management (ICM) is considered. Three examples, from the Severn Estuary, UK the coast of the North West of England and North Wales, and the Fal and Helford estuaries, are used to demonstrate the requirements of a LIS for coastal areas. The role of GIS as part of the solution is considered in detail. The paper demonstrates how ideas from the disciplines of information systems and information science can be practically applied in coastal areas. The findings promote a holistic approach for those involved in the development of technologies and dealing with data and information about coasts and oceans.     

Initiation and growth of salt-based thrust belts on passive margins: results from physical models

Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time.     

Detrital record of Mesozoic shortening in the Yanshan belt, NE China: testing structural interpretations with basin analysis

The Yanshan fold‐thrust belt is an exposed portion of a major Mesozoic orogenic system that lies north of Beijing in northeast China. Structures and strata within the Yanshan record a complex history of thrust faulting characterized by multiple deformational events. Initially, Triassic thrusting led to the erosion of a thick sequence of Proterozoic and Palaeozoic sedimentary strata from northern reaches of the thrust belt; Triassic–Lower Jurassic strata that record this episode are deposited in a thin belt south of this zone of erosion. This was followed by postulated Late Jurassic emplacement of a major allochthon (the Chengde thrust plate), which is thought to have overridden structures and strata associated with the Triassic event and is cut by two younger thrusts (the Gubeikou and Chengde County thrusts). The Chengde allochthon is now expressed as a major east–west trending, thrust‐bounded synform (the Chengde synform), which has been interpreted as a folded klippe 20 km wide underlain by a single, north‐vergent thrust fault. Two sedimentary basins, defined on the basis of provenance, geochronology and palaeodispersal trends, developed within the Yanshan belt during Late Jurassic–Early Cretaceous time and are closely associated with the Chengde thrust and allied structures. Shouwangfen basin developed in the footwall of the Gubeikou thrust and records syntectonic unroofing of the hanging wall of that fault. Chengde basin developed in part atop Proterozoic strata interpreted as the upper plate of the Chengde allochthon and records unroofing of the adjacent Chengde County thrust. Both the Chengde County thrust and the Gubeikou thrust are younger than emplacement of the postulated Chengde allochthon, and structurally underlie it, yet neither Shouwangfen basin nor Chengde basin contain a detrital record of the erosion of this overlying structure. In addition, facies, palaeodispersal patterns and geochronology of Upper Jurassic strata that are cut by the Chengde thrust suggest only limited (ca. 5 km) displacement along this fault. We suggest that the units forming the Chengde synform are autochthonous, and that the synform is bounded by two limited‐displacement faults of opposing north and south vergence, rather than a single large north‐directed thrust. This conclusion implies that the Yanshan belt experienced far less Late Jurassic shortening than was previously thought, and has major implications for the Mesozoic evolution of the region. Specifically, we argue that the bulk of shortening and uplift in the Yanshan belt was accomplished during Triassic–Early Jurassic time, and that Late Jurassic structures modified and locally ponded sediments from a well‐developed southward drainage system developed atop this older orogen. Although Upper Jurassic strata are widespread throughout the Yanshan belt, it is clear that these strata developed within several discrete intermontane basins that are not correlable across the belt as a single entity. Thus, the Yanshan has no obvious associated foreland basin, and determining where the Mesozoic erosional products of this orogen ultimately lie is one of the more intriguing unresolved questions surrounding the palaeogeography of North China.     

Activity–composition relations for phases in petrological calculations: an asymmetric multicomponent formulation

For petrological calculations, including geothermobarometry and the calculation of phase diagrams (for example, P–T petrogenetic grids and pseudosections), it is necessary to be able to express the activity–composition (a–x) relations of minerals, melt and fluid in multicomponent systems. Although the symmetric formalism—a macroscopic regular model approach to a–x relations—is an easy-to-formulate, general way of doing this, the energetic relationships are a symmetric function of composition. We allow asymmetric energetics to be accommodated via a simple extension to the symmetric formalism which turns it into a macroscopic van Laar formulation. We term this the asymmetric formalism (ASF). In the symmetric formalism, the a–x relations are specified by an interaction energy for each of the constituent binaries amongst the independent set of end members used to represent the phase. In the asymmetric formalism, there is additionally a "size parameter" for each of the end members in the independent set, with size parameter differences between end members accounting for asymmetry. In the case of fluid mixtures, for example, H₂O–CO₂, the volumes of the end members as a function of pressure and temperature serve as the size parameters, providing an excellent fit to the a–x relations. In the case of minerals and silicate liquid, the size parameters are empirical parameters to be determined along with the interaction energies as part of the calibration of the a–x relations. In this way, we determine the a–x relations for feldspars in the systems KAlSi₃O₈–NaAlSi₃O₈ and KAlSi₃O₈–NaAlSi₃O₈–CaAl₂Si₂O₈, for carbonates in the system CaCO₃–MgCO₃, for melt in the melting relationships involving forsterite, protoenstatite and cristobalite in the system Mg₂SiO₄–SiO₂, as well as for fluids in the system H₂O–CO₂. In each case the a–x relations allow the corresponding, experimentally determined phase diagrams to be reproduced faithfully. The asymmetric formalism provides a powerful and flexible way of handling a–x relations of complex phases in multicomponent systems for petrological calculations.     

青藏高原东部全新世冬夏季风变化的高分辨率泥炭记录

在建立了全新世泥炭沉积物高分辨率冬夏季风代用指标时间序列的基础上, 发现青藏高原若尔盖地区全新世冬夏季风的变化具有此消彼长和同时消长两种基本的模式, 冬季风与夏季风在不同时间尺度上两种模式又相互嵌套. 由冬夏季风指标叠加效应合成的气候状况却有与全球同步的规律性, 表现出千年-百年尺度的不稳定性, 6.2 ka的季风突然减弱事件要比8.0 ka的事件更显著, 反映了亚洲季风的区域特点或它本身就是全球气候的一个窗口.     

The effect of organic materials on the mobility and toxicity of metals in contaminated soils

Organic materials such as compost are often proposed as suitable materials for the remediation of contaminated brownfield sites intended for soft end-use. In addition to vitalising the soil, they are also believed to immobilise metals thereby breaking contaminant-receptor pathways and reducing the ecotoxicity of the contaminants. However, some research has demonstrated contradictory effects between composts on metal immobilisation. In the present study, four different composts and a liming product containing organic matter (LimeX70) were tested to examine both their metal retention and toxicity reduction capabilities on three different metal contaminated soils. Leaching tests, a plant growth test with Greek cress (Lepidium sativum), an earthworm (Eisenia fetida) survival and condition test and a bacterial toxicity test using Vibrio fischeri were carried out. The leaching test results showed that spent mushroom compost caused an increase in metal concentration in the leachates, while LimeX70 caused a decrease. The variation in behaviour between different amendments for each soil was high, so a generic conclusion could not be drawn. Toxicity tests showed significant reduction of metal bioavailability and toxicity for Greek cress, earthworms and bacteria. The results also suggest that more research should be undertaken to understand the mechanisms involved in metal complexation using different types of organic matter, in order to optimise the use of organic materials like compost for soil remediation.     

A Discussion of IGS Solutions and Their Impact on Geodetic and Geophysical Applications

The International Association of Geodesy officially established the International GPS Service (IGS) on Janaury 1, 1994. Its prime objective is to provide support and a rerefence system for a wide variety of scientific and practical applications involving GPS. To fulfill its role the IGS also generates, in addition to its fundamental products (orbital/staion positions and consistent Earth orientation parameters), additional reference-system products providing the necessary infrastructure, standards, and means of calibrations for timing and various atmospheric applications of GPS. The generation and efficient application of IGS products and their impact on a number of positioning and atmospheric applications, including low earth orbit satellites, is reviewed and discussed. @ 1998 John Wiley & Sons, Inc.