Cyclic and Seasonal Beach Response: A Comparison of Oceanside and Bayside Beaches

This study compares the cyclic and seasonal geomorphic responses of oceanside and bayside beaches on Sandy Hook Spit, New Jersey. It was hypothesized that the different nature of onshore wind regimes at bayside and oceanside beaches would cause different types of beach change. On the east-facing ocean shoreline, rates of beach change are related to weather patterns associated with the passage of mid-latitude cyclonic storms. Bayside beach change is related to the influence of the prevailing westerlies. Storm erosion and post-storm deposition is more rapid on oceanside beaches. Swell waves occurring between storms rapidly reinstate pre-storm equilibrium conditions. Lower bay-side wave energies occurring between storms have little effect on profile development, and foreshore slopes inherited from previous storms undergo little change. Bayside beaches therefore appear to be more in equilibrium with storm conditions than oceanside beaches.

Changes in foreshore slope, beach volume, and beach position associated with individual storm events are compared to seasonal trends to test the applicability of the Hayes cyclic model of beach development to both oceanside and bayside beaches. There is evidence of a cyclic trend of develop-ment on the more exposed ocean sites and seasonal development on the more sheltered bayside sites, which suggests that cyclic development may be causally related to the difference among the energy levels of the storm and nonstorm wave regimes.     

AGE ESTIMATES OF INLAND DUNES IN EAST-CENTRAL LOWER MICHIGAN USING SOILS DATA

Extensive deposits of eolian sand occur deep (>50 km) within the interior of east-central lower Michigan. These dunes are most common in the Saginaw lowland where they are parabolic, with limbs oriented northwesterly. Their presence on densely forested landscapes indicates that paleoenvironmental conditions differed sufficiently for dune formation to have occurred. In a previous study, Arbogast et al. (1997) illustrated that surface soils in the northwestern part of the Saginaw dune field were morphologically similar, consisting of weakly developed Spodosols (A/E/Bs/C horizonation). Thus, these dunes must have stabilized concurrently following regional mobilization of eolian sand. In this study, we present soils data from dunes in the southeastern part of the Saginaw dune field. Surface soils were analyzed at 19 sites in the Deford State Game Area in Tuscola County. Morphologically, the soils within the Deford area are similar (A/E/Bs/C horizonation), indicating that Deford dunes stabilized concurrently. Statistical (ANOVA, KW, factor analysis) comparison of Deford soils and soils to the northwest, however, reveals that significant developmental differences exist between the two areas, with Deford soils being better developed. Given that variables (climate, soil texture, pH) are more conducive for Spodosol development to the northwest, we conclude that Deford soils are older. Thus, Deford dunes must have stabilized prior to their counterparts to the northwest. [Key words: eolian processes, sand dunes, soils, Spodosols, Michigan.]     

The role of palaeolimnology in assessing eutrophication and its impact on lakes

Eutrophication is perhaps the most pervasive form of pollution. Here we first review its effects on lake ecosystems based largely on modern ecological investigation. The longer time scale afforded by palaeolimnological investigation has seen an increase in the number of the publications since 1990 with a disproportionate increase in citations demonstrating the increasing use and usefulness of palaeolimnology to help understand lakes ecosystems and their response to eutrophication. We summarise briefly the history and origins of palaeolimnological investigation into eutrophication and its impacts in lakes. Then we review quantitative and qualitative palaeolimnological methods for tracking change in nutrient concentrations, algal community and abundance, macrophyte community composition and abundance and zooplanktivorous fish density. The usefulness of stable isotope analysis on sediment organic matter to track eutrophication is assessed and alternative methods discussed. A current challenge is to determine the effects of recent climate change on lake ecosystems. The impacts of climate change and eutrophication on the ecology of lakes have many similarities making it difficult to disentangle the impact of one from the other, in particular where the eutrophication impacts are greatest. We review a number of recent palaeolimnological studies, in particular those integrating long term monitoring data, which have gone some way to identifying when nutrients or climate may be having the greatest impact. Finally, we discuss possible future directions for the discipline, such as the greater integration of studies of evolutionary change using molecular techniques.     

Sea‐level and ocean‐current control on carbonate‐platform growth,Maldives, Indian Ocean

Multichannel high‐resolution seismic and multibeam data were acquired from the Maldives‐isolated carbonate platform in the Indian Ocean for a detailed characterization of the Neogene bank architecture of this edifice. The goal of the research is to decipher the controlling factors of platform evolution, with a special emphasis on sea‐level changes and changes of the oceanic currents. The stacking pattern of Lower to Middle Miocene depositional sequences, with an evolution of a ramp geometry to a flat‐topped platform, reflects variations of accommodation, which here are proposed to be primarily governed by fluctuations of relative sea level. Easterly currents during this stage of bank growth controlled an asymmetric east‐directed progradation of the bank edge. During the late middle Miocene, this system was replaced by a twofold configuration of bank development. Bank growth continued synchronously with partial bank demise and associated sediment‐drift deposition. This turnover is attributed to the onset and/or intensification of the Indian monsoon and related upwelling and occurrence of currents, locally changing environmental conditions and impinging upon the carbonate system. Mega spill over lobes, shaped by reversing currents, formed as large‐scale prograding complexes, which have previously been interpreted as deposits formed during a forced regression. On a regional scale, a complex carbonate‐platform growth can occur, with a coexistence of bank‐margin progradation and aggradation, as well as partial drowning. It is further shown that a downward shift of clinoforms and offlapping geometries in carbonate platforms are not necessarily indicative for a sea‐level driven forced regression. Findings are expected to be applicable to other examples of Cenozoic platforms in the Indo‐Pacific region.     

Are numerical weather model outputs helpful to reduce tropospheric delay signals in InSAR data?

Interferometric synthetic aperture radar phase data include not only signals due to crustal movements, but also those associated with microwave propagation delay through the atmosphere. In particular, the effect of water vapor can generate apparent signals in the order of a few centimeters or more, and prevent us from detecting such geophysical signals as those due to secular crustal deformation. To examine if and to what extent numerical weather model (NWM) outputs are helpful to reduce the tropospheric delay signals at spatial scales of 5–50 km wavelengths, we compared three approaches of tropospheric signal reduction, using 54 interferograms in central Hokkaido, Japan. The first approach is the conventional topography-correlated delay correction that is based on the regional digital elevation model (DEM). The second approach is based on the Japan Meteorological Agency’s operational meso-scale analysis model (MSM) data, where we compute tropospheric delays and subtract them from the interferogram. However, the MSM data are available at predefined epochs and their spatial resolution is about 10 km; therefore, we need to interpolate both temporally and spatially to match with interferograms. Expecting to obtain a more physically plausible reduction of the tropospheric effects, we ran a 1-km mesh high-resolution numerical weather model WRF (Weather Research and Forecasting model) by ourselves, using the MSM data as the initial and boundary conditions. The third approach is similar to the second approach, except that we make use of the WRF-based tropospheric data. Results show that if the topography-correlated phases are significant, both the conventional DEM-based approach and the MSM-based approach reveal comparable performances. However, when the topography-correlated phases are insignificant, none of the approaches can efficiently reduce the tropospheric phases. Although it could reduce the tropospheric signals in a local area, in none of the case studies did the WRF model produce the “best” performance. Whereas the global atmospheric model outputs are shown to be effective in reducing long-wavelength tropospheric signals, we consider that further improvements are needed for the initial and boundary condition data for high-resolution NWM, so that the NWM-based approach will become more reliable even in the case of a non-stratified troposphere.     

Optimized formulas for the gravitational field of a tesseroid

Various tasks in geodesy, geophysics, and related geosciences require precise information on the impact of mass distributions on gravity field-related quantities, such as the gravitational potential and its partial derivatives. Using forward modeling based on Newton’s integral, mass distributions are generally decomposed into regular elementary bodies. In classical approaches, prisms or point mass approximations are mostly utilized. Considering the effect of the sphericity of the Earth, alternative mass modeling methods based on tesseroid bodies (spherical prisms) should be taken into account, particularly in regional and global applications. Expressions for the gravitational field of a point mass are relatively simple when formulated in Cartesian coordinates. In the case of integrating over a tesseroid volume bounded by geocentric spherical coordinates, it will be shown that it is also beneficial to represent the integral kernel in terms of Cartesian coordinates. This considerably simplifies the determination of the tesseroid’s potential derivatives in comparison with previously published methodologies that make use of integral kernels expressed in spherical coordinates. Based on this idea, optimized formulas for the gravitational potential of a homogeneous tesseroid and its derivatives up to second-order are elaborated in this paper. These new formulas do not suffer from the polar singularity of the spherical coordinate system and can, therefore, be evaluated for any position on the globe. Since integrals over tesseroid volumes cannot be solved analytically, the numerical evaluation is achieved by means of expanding the integral kernel in a Taylor series with fourth-order error in the spatial coordinates of the integration point. As the structure of the Cartesian integral kernel is substantially simplified, Taylor coefficients can be represented in a compact and computationally attractive form. Thus, the use of the optimized tesseroid formulas particularly benefits from a significant decrease in computation time by about 45 % compared to previously used algorithms. In order to show the computational efficiency and to validate the mathematical derivations, the new tesseroid formulas are applied to two realistic numerical experiments and are compared to previously published tesseroid methods and the conventional prism approach.     

Lettau’s Contribution to the Obukhov Length Scale: A Scientific Historical Study

Boundary-Layer Meteorology - It has been repeatedly assumed that Heinz Lettau found the Obukhov length in 1949 independently of Obukhov in 1946. However, it was not the characteristic length scale,...     

The nature and genesis of marginal Cu–PGE–Au sulphide mineralisation in Paleogene Macrodykes of the Kangerlussuaq region, East Greenland

The Kangerlussuaq region of East Greenland hosts a variety of early Tertiary extrusive and intrusive igneous rocks related to continental break up and the passage of the ancestral Iceland plume. These intrusive bodies include a number of gabbroic macrodykes, two of which—the Miki Fjord Macrodyke, and the newly discovered Togeda Macrodyke—contain Cu–PGE–Au sulphide mineralisation along their margins. Sulphides occur as disseminated interstitial blebs and rounded globules of chalcopyrite and pyrrhotite with some Fe–Ti oxides and platinum-group minerals, comprising largely Pd bismuthides and tellurides. The globules are interpreted to have formed from fractionation of trapped droplets of an immiscible Cu- and Pd-rich sulphide melt and show geopetal indicators. Sulphur isotopes imply a local crustal source of S in these from pyritic sediments of the Kangerlussuaq Basin. Thus, generation of these sulphide occurrences was controlled by local country rock type. Low Ni/Cu and Pt/Pd ratios, also present in the Platinova reefs in the Skaergaard Intrusion, indicate that early fractionation of olivine may have depleted the magma of Ni and suggest the likely presence of a large magma chamber at depth. Xenoliths of Ni-rich olivine cumulates in the Miki Fjord Macrodyke may have been sourced from such a body. The location of thus far unidentified conduit or feeder zones to the macrodykes beneath the present day surface may represent potential targets for more massive sulphide orebodies.     

The competing models for the origin and internal evolution of granitic pegmatites in the light of melt and fluid inclusion research

In this paper we discuss the main petrogenetic models for granitic pegmatites and how these models have evolved over time. We suggest that the present state of knowledge requires that some aspects of these models to be modified, or absorbed into newer ones. Pegmatite formation and internal evolution have long supposed the need for highly water- and flux-enriched magmas to explain the differences between pegmatites and other intrusives of similar major element composition. Compositions and textural characteristics of fluid and melt inclusions in pegmatite minerals provide strong evidence for such magmas. Furthermore, we show that melt inclusion research has increased the number of potential flux components, which may include H₂O, OH^?, CO₂, HCO ₃ ^? , CO ₃ ^2? , SO ₄ ^2? , PO ₄ ^3? , H₃BO₃, F , and Cl, as well as the elements Li, Na, K, Rb, Cs, and Be, herein described as melt structure modifiers. In this paper we emphasize that the combined effect which these components have on the properties of pegmatite melts is difficult to deduce from experimental studies using only a limited number of these components. The combination and the amount of the different magmatic species, together with differences in the source region, and variations in pressure and temperature cause the great diversity of the pegmatites observed. Some volatile species, such as CO ₃ ^2? and alkalis, have the capacity to increase the solubility of H₂O in silicate melt to an extraordinary degree, to the extent that melt-melt-fluid immiscibility becomes inevitable. It is our view that the formation of pegmatites is connected with the complex interplay of many factors.