Magnetic susceptibility anisotropy measurements of coal from the South Wales coal field: a coalification process indicator

Summary. Anisotropy of magnetic susceptibility measurements have been performed on 154 specimens taken from 25 different seams in the South Wales Coal Field, up to 24 samples per seam. The magnetic fabric determined is represented, in general, by oblate spheroids with minimum ( K _c) AMS axes usually clustered at a near-vertical, or occasionally, near-horizontal pole which is normal to the magnetic foliation plane defined by great circle distributions of maximum ( K _a) and intermediate ( K _b) axes. The results suggest that the coalification process and variations in rank within the coal field are due to the combined effects of vertical compression and compaction resulting from variations in overburden pressure, and to horizontal compression, due to variations in tectonic thrusting during the Variscan Orogeny. Analysis of the AMS of closely spaced samples across a single anthracite seam shows no systematic variability in magnetic properties within the seam.     

A seismic study of deep geological structure in the Bristol Channel area, SW Britain

Summary. Results from eight seismic refraction lines, 35–90 km long, in the Bristol Channel area are presented. The data, mostly land recordings of marine shots, have been interpreted mainly by ray-tracing and time-term modelling. Upper layer velocities through Palaeozoic rocks usually fall within the range 4.8–5.2 km s⁻¹. Below the Carboniferous Limestone with a normal velocity of 5.1–5.2 kms⁻¹, the Old Red Sandstone with a velocity of 4.7–4.8 kms⁻¹ acts as a low velocity layer, as do parts of the underlying Lower Palaeozoic succession. In the central South Wales/Bristol Channel area and the Mendips, a 5.4–5.5 km s⁻¹ refractor is correlated with a horizon at or near the top of the Lower Palaeozoic succession. Under the whole area, except for north Devon, a 6.0–6.2 km s⁻¹ basal refractor has been located and is correlated with Precambrian crystalline basement rocks. In general, this refractor deepens southwards from a series of basement highs, which existed before the major movements of the Variscan orogeny in South Wales, resulting in a southerly thickening of the pre Upper Carboniferous supra-basement sequence. In north Devon, a 6.2 km s⁻¹ refractor at shallow depth, interpreted as a horizon in the Devonian or Lower Palaeozoic succession, overlies a deep reflector that may represent the Precambrian crystalline basement.     

Potential impacts of global climate change on the hydrology and ecology of ephemeral freshwater systems of the forests of the northeastern United States

Global, national, and regional assessments of the potential effects of Global Climate Change (GCC) have been recently released, but not one of these assessments has specifically addressed the critical issue of the potential impacts of GCC on ephemeral freshwater systems (EFS). I suggest that this is a major oversight as EFS occur in various forms across the globe. In the northeastern United States, these systems, whether ephemeral (“vernal”) pools or ephemeral or intermittent headwater streams are abundant and provide unique habitats critical to the maintenance of forest biodiversity. Since the hydrology of these waterbodies is strongly affected by weather patterns (in the short-term) or climate (long-term), they are especially sensitive to climate change. In this essay, I review the literature on relationships between climate and hydrology of EFS and on relationships between hydrology and ecology of these systems. I then conclude with my assessment of potential impacts of GCC on the hydrology of EFS and implications for their ecology. The focus of this essay will be on EFS of the forests of the northeastern United States, but will include literature from other regions as they relate to the general relationships between GCC and EFS.     

A dark matter disc in three cosmological simulations of Milky Way mass galaxies

Making robust predictions for the phase-space distribution of dark matter at the solar neighbourhood is vital for dark matter direct-detection experiments. To date, almost all such predictions have been based on simulations that model the dark matter alone. Here, we use three cosmological hydrodynamic simulations of bright, disc-dominated galaxies to include the effects of baryonic matter self-consistently for the first time. We find that the addition of baryonic physics drastically alters the dark matter profile in the vicinity of the solar neighbourhood. A stellar/gas disc, already in place at high redshift, causes merging satellites to be dragged preferentially towards the disc plane where they are torn apart by tides. This results in an accreted dark matter disc that contributes ∼0.25–1.5 times the non-rotating halo density at the solar position. The dark disc, unlike dark matter streams, is an equilibrium structure that must exist in disc galaxies that form in a hierarchical cosmology. Its low rotation lag with respect to the Earth significantly boosts Weakly Interacting Massive Particle (WIMP) capture in the Earth and Sun, boosts the annual modulation signal and leads to distinct variations in the flux as a function of recoil energy that allow the WIMP mass to be determined.     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.     

Evaluation of a simple,inexpensive, in situ sampler for measuring time‐weighted average concentrations of suspended sediment in rivers and streams

The accurate measurement of suspended sediment (<200 μm) in aquatic environments is essential to understand and effectively manage changes to sediment, nutrient, and contaminant concentrations on both temporal and spatial scales. Commonly used sampling techniques for suspended sediment either lack the ability to accurately measure sediment concentration (e.g., passive sediment samplers) or are too expensive to deploy in sufficient number to provide landscape‐scale information (e.g., automated discrete samplers). Here, we evaluate a time‐integrated suspended sediment sampling technique, the pumped active suspended sediment (PASS) sampler, which collects a sample that can be used for the accurate measurement of time‐weighted average (TWA) suspended sediment concentration and sediment particle size distribution. The sampler was evaluated against an established passive time‐integrated suspended sediment sampling technique (i.e., Phillips sampler) and the standard discrete sampling method (i.e., manual discrete sampling). The PASS sampler collected a sample representative of TWA suspended sediment concentration and particle size distribution of a control sediment under laboratory conditions. Field application of the PASS sampler showed that it collected a representative TWA suspended sediment concentration and particle size distribution during high flow events in an urban stream. The particle size distribution of sediment collected by the PASS and Phillips samplers were comparable and the TWA suspended sediment concentration of the samples collected using the PASS and discrete sampling techniques agreed well, differing by only 4% and 6% for two different high flow events. We should note that the current configuration of the PASS sampler does not provide a flow‐weighted measurement and, therefore, is not suitable for the determination of sediment loads. The PASS sampler is a simple, inexpensive, and robust in situ sampling technique for the accurate measurement of TWA suspended sediment concentration and particle size distribution.     

Evaluating post-wildfire logging-slash cover treatment to reduce hillslope erosion after salvage logging using ground measurements and remote sensing

Continuing long and extensive wildfire seasons in the Western US emphasize the need for better understanding of wildfire impacts including post-fire management scenarios. Advancements in our understanding of post-fire hillslope erosion and watershed response such as flooding, sediment yield, and debris flows have recently received considerable attention. The potential impacts of removing dead trees, called salvage logging, has been studied, however the use of remotely sensed imagery after salvage logging to evaluate spatial patterns and recovery is novel. The 2015 North Star Fire provided an opportunity to evaluate hillslope erosion reduction using two field experiments and coincidental remotely sensed imagery over 3 years. Simulated rill experiments with four flow rates were used to quantify hillslope erosion on skidder trails with and without added logging slash compared with a burned-only control. Seven replicated hillslope silt fence plots with the same treatments were also evaluated for natural rainfall events. WorldView-2 satellite imagery was used to relate ground cover and erodible bare soil between the two experiments using multi-temporal Normalized Differenced Vegetation Index (NDVI) values. Results indicate that the skid trails produced significantly more sediment (0.70 g s⁻¹) than either the slash treated skid trail (0.34 g s⁻¹) or controls (0.04 g s⁻¹) with the simulated rill experiment. Similarly, under natural rainfall conditions sediment yield from hillslope silt fence plots was significantly greater for the skid trail (3.42 Mg ha⁻¹) than either the slash treated skid trail (0.18 Mg ha⁻¹) or controls (0 Mg ha⁻¹). An NDVI value of 0.32 on all plots over all years corresponded to a ground cover of about 60% which is an established threshold for erosion reduction. Significant relationships between NDVI, ground cover, and sediment values suggest that NDVI may help managers evaluate ground cover and erosion potential remotely after disturbances such as a wildfire or salvage logging.     

Zeolite zones in East Greenland: use of native copper by pre‐contact Inuit?

Zeolites are a diverse group of calcium and sodium aluminosilicate minerals. They are tectosilicates (3‐D arrays of SiO₄ tetrahedra), but vary in chemistry and crystal symmetry. Some readily exchange sodium for calcium and are used as water softeners. They also find applications as molecular sieves in petroleum refining, although the bulk of zeolites used industrially today are synthetic. These minerals form at low temperatures under well‐defined conditions and can be used as indicators of palaeotemperatures. In the same environment, but at higher temperatures, other minerals form including quartz, calcite, prehnite and even native copper. The Inuit of East Greenland, a Stone Age people, may have utilized native copper from this environment as did the Copper Inuit of the central Canadian Arctic.     

A case study of using Raman lidar measurements in high-accuracy GPS applications

This paper investigates the impact of rapid small-scale water vapor fluctuations on GPS height determination. Water vapor measurements from a Raman lidar are used for documenting the water vapor heterogeneities and correcting GPS signal propagation delays in clear sky conditions. We use data from four short observing sessions (6 h) during the VAPIC experiment (15 May–15 June 2004). The retrieval of wet delays from our Raman lidar is shown to agree well with radiosonde retrievals (bias and standard deviation (SD) were smaller than 1 and 2.8 mm, respectively) and microwave radiometers (from two different instruments, bias was 6.0/−6.6 mm and SD 1.3/3.8 mm). A standard GPS data analysis is shown to fail in accurately reproducing fast zenith wet delay (ZWD) variations. The ZWD estimates could be improved when mean post-fit phase residuals were removed. Several methodologies for integrating zenith lidar observations into the GPS data processing are also presented. The final method consists in using lidar wet delays for correcting a priori the GPS phase observations and estimating a scale factor for the lidar wet delays jointly with the GPS station position. The estimation of this scale factor allows correcting for a mis-calibration in the lidar data and provides in the same way an estimate of the Raman lidar instrument constant. The agreement of this constant with an independent determination using radiosonde data is at the level of 1–4%. The lidar wet delays were derived by ray-tracing from zenith pointing measurements: further improvement in GPS positioning is expected from slant path lidar measurements that would properly account for water vapor anisotropy.     

Connecting Local to Global: Geographic Information Systems and Ecological Footprints as Tools for Sustainability

Tools that support public engagement with sustainability are essential for local sustainability planning. This research investigates the ability of two geographic information system (GIS)-based tools to promote discussion of sustainability in a suburban context. A local ecological footprint tool and a community environmental atlas (an environmentally themed online mapping system) were created for seven suburban boroughs of Montreal. Variations of both tools have been used to support sustainability efforts, but their use has not been widely evaluated. Working from a public participation GIS (PPGIS) framework that recognizes the powerful influence of data representation, this research uses focus groups to evaluate how well these tools address three criteria that have emerged from the literature on public engagement in sustainability: interdependency across systems, reflexivity about personal and social decision making, and interactions across spatial scales. Whereas the atlas remains advantageous for discussing local spatial specifics, it was found that the ecological footprint helped people see the interconnections among systems, integrate local and global aspects of sustainability, and reflect on the values and assumptions underlying current social and economic structures.