Ultra-rapid earth rotation determination with VLBI during CONT11 and CONT14

We present earth rotation results from the ultra-rapid operations during the continuous VLBI campaigns CONT11 and CONT14. The baseline Onsala–Tsukuba, i.e., using two out of the 13 and 17 stations contributing to CONT11 and CONT14, respectively, was used to derive UT1-UTC in ultra-rapid mode during the ongoing campaigns. The latency between a new observation and a new UT1-UTC result was less than 10 min for more than 95% of the observations. The accuracy of the derived ultra-rapid UT1-UTC results is approximately a factor of three worse than results from optimized one-baseline sessions and/or complete analysis of large VLBI networks. This is, however, due to that the one-baseline picked from the CONT campaigns is not optimized for earth rotation determination. Our results prove that the 24/7 operation mode planned for VGOS, the next-generation VLBI system, is possible already today. However, further improvements in data connectivity of stations and correlators as well in the automated analysis are necessary to realize the ambitious VGOS plans.     

Verification of vertically generalized production model and estimation of primary production in Sagami Bay,Japan

The Vertically Generalized Production Model (VGPM) was verified by the primary production data of the Sagami Bay, Japan. The VGPM with open ocean parameters including P ^B _opt , maximum primary production per unit of chlorophyll a in the water column, explained only 40% of the variability of integrated primary production. Formulations of the open ocean P ^B _opt showed no correlation with in situ P ^B _opt . Adjustment of the parameters of chlorophyll a and temperature dependent P ^B _opt improved the estimation of integrated primary production to 47% of the variation. Vertical integration parameters of VGPM also have to be adjusted to improve the estimation. Integrated primary production calculated with a stronger light dependency and with the adjusted P ^B _opt model can explain 74% of the variation. This model was used to estimate primary production of the Sagami Bay during 2003 with satellite data. In situ measurements on cloudy days indicate that the use of satellite data from sunny days only overestimates primary production.     

Geochemical composition of dykes along the Cameroon Line (CL): Petrogenesis and similarities with the Central Atlantic Magmatic Province

We report whole-rock geochemistry and Sr–Nd–Pb isotopic compositions of mafic dykes intruded in the Precambrian granito-gneissic basement complex, exposed at Nyos, Batibo, Dschang and Foumban on the Cameroon Line. The dykes are alkaline (Batibo), transitional (Foumban), and subalkaline (Nyos, Batibo and Dschang) with SiO₂ of 45–54 wt% and MgO of 2–9 wt%, similar to dykes reported in other areas of the Cameroon Line (CL) and the Central Atlantic Magmatic Province (CAMP). The abundances of rare earth elements (REE) and the Primitive Mantle normalised patterns for the Nyos, Batibo and Dschang dykes are similar to those of MORB, indicating that the dykes formed at shallower depths by a higher degree of partial melting relative to the Foumban dykes and the alkaline lavas of the CL. The transitional basaltic dykes with steeper REE patterns have their sources at deeper levels in the lithospheric mantle, possibly the garnet-spinel transition zone and were generated by a lower degree partial melting of the lithospheric and plume components. The Nyos and Batibo subalkaline dykes show similar isotopic compositions with a spectrum extending from depleted (DMM-like) to enriched (EM1-like) mantle, indicating the similarity in their source components. The Dschang dykes show distinct isotopic characteristics with relatively unradiogenic Nd-Pb isotope compositions compared to the Batibo and Nyos dykes. The Foumban transitional dykes with characteristic wide ranges in Sr-Nd-Pb isotopic compositions reveal varying contributions from enriched mantle components (EM1 and EM2) in addition to its plume signature similar to those of CL lavas. The Nyos and Batibo dykes alongside other dykes on the CL have low TiO₂ abundances (<2 wt%), negative PM-normalised Nb-anomalies, and moderately to strongly enriched REE patterns, and isotopic composition that overlaps with those of CAMP, suggesting a similar lithospheric origin.     

Simultaneous volume measurements of post-perovskite and perovskite in MgSiO3 and their thermal equations of state

Simultaneous volume measurements of MgSiO₃ post-perovskite (PPv) and perovskite (Pv) were performed in a diamond anvil cell (DAC) combined with synchrotron X-rays. An externally-heated DAC was used in addition to a laser-heated DAC for the volume measurement experiment at high temperatures. The volume data were collected in the stability field of post-perovskite from 115 to 130 GPa. The temperature generated in the externally-heated and the laser-heated DACs for the volume measurement were up to 832 and 2330 K, respectively. Using two different but complementary heating techniques, we collected the data at a wide temperature range from 300 to 2330 K. The obtained P-V-T data for PPv and Pv were fitted to a third-ordered Birch-Murnaghan equation of state (EOS). For a precise comparison of the volume between the two phases, the EOSs were constructed based on the same pressure scale of MgO. The simultaneous volume measurements and the volumes calculated from the determined EOSs demonstrate that the volume difference between PPv and Pv of about 1.5% is almost constant with increasing temperature to 4000 K at the transition. At the base of the mantle, this density difference corresponds to a temperature anomaly of 1300 K without the phase transition due to the very small thermal expansivity of minerals, which has a significant effect on mantle dynamics. The thermal expansivity contrast between the top and the bottom of the mantle is a factor of 3.6. From a mantle convection study, this value suggests that huge and hot plumes are formed at the core–mantle boundary.     

U-series dating of Lake Nyos maar basalts,Cameroon (West Africa): Implications for potential hazards on the Lake Nyos dam

From previously published ¹⁴C and K–Ar data, the age of formation of Lake Nyos maar in Cameroon is still in dispute. Lake Nyos exploded in 1986, releasing CO₂ that killed 1750 people and over 3000 cattle. Here we report results of the first measurements of major elements, trace elements and U-series disequilibria in ten basanites/trachy-basalts and two olivine tholeiites from Lake Nyos. It is the first time tholeiites are described in Lake Nyos. But for the tholeiites which are in ²³⁸U–²³⁰Th equilibrium, all the other samples possess ²³⁸U–²³⁰Th disequilibrium with 15 to 28% enrichment of ²³⁰Th over ²³⁸U. The (²²⁶Ra/²³⁰Th) activity ratios of these samples indicate small (2 to 4%) but significant ²²⁶Ra excesses. U–Th systematics and evidence from oxygen isotopes of the basalts and Lake Nyos granitic quartz separates show that the U-series disequilibria in these samples are source-based and not due to crustal contamination or post-eruptive alteration. Enrichment of ²³⁰Th is strong prima facie evidence that Lake Nyos is younger than 350 ka. The ²³⁰Th–²²⁶Ra age of Nyos samples calculated with the (²²⁶Ra/²³⁰Th) ratio for zero-age Mt. Cameroon samples is 3.7 ± 0.5 ka, although this is a lower limit as the actual age is estimated to be older than 5 ka, based on the measured mean ²³⁰Th/²³⁸U activity ratio. The general stability of the Lake Nyos pyroclastic dam is a cause for concern, but judging from its ²³⁰Th–²²⁶Ra formation age, we do not think that in the absence of a big rock fall or landslide into the lake, a big earthquake or volcanic eruption close to the lake, collapse of the dam from erosion alone is as imminent and alarming as has been suggested.     

Lithological,structural, and chronological relationships between the Sanbagawa Metamorphic Complex and the Cretaceous Shimanto Accretionary Complex on the central Kii Peninsula,SW Japan

It is essential to clarify the lithological, structural, and chronological relationships between the Sanbagawa Metamorphic Complex (MC) and the Cretaceous Shimanto Accretionary Complex (AC) for understanding the tectonic evolution of SW Japan. To this end, we carried out a detailed field survey of the Sanbagawa MC and the Cretaceous Shimanto AC on the central Kii Peninsula, where they are in direct contact with each other. We also conducted U–Pb dating of detrital zircons from these complexes. The field survey showed that the boundary between the Iro Complex of the Sanbagawa MC and the Mugitani Complex of the Shimanto AC, Narai Fault, shows a sinistral sense of shear with a reverse dip‐slip component, and there are significant differences in the strain intensity and the degree of recrystallization between the two complexes across this fault. Detrital zircon U–Pb dating indicates that the Iro Complex in the hanging wall of the Narai Fault shows a significantly younger maximum depositional age than the Mugitani Complex in the footwall of the fault, and an apparently large gap in the MDA of ca. 35 Myr exists across this fault. This large age gap across the Narai Fault suggests that this fault is an essential tectonic boundary fault within the Cretaceous accretionary–metamorphic complexes on the Kii Peninsula, and is considered to be an out‐of‐sequence thrust. In addition, a similar shear direction and a large age gap have been identified across the Ui Thrust, which marks the boundary between the Kouyasan and Hidakagawa belts of the Cretaceous Shimanto AC. The Cretaceous accretionary–metamorphic complexes record the large‐scale tectonic juxtapositions of complexes, and these juxtaposed structures had been caused by sinistral–reverse movements on the tectonic boundary faults such as the Narai Fault and the Ui Thrust.     

A near-infrared survey of Miras and the distance to the Galactic Centre

We report the results of a near-infrared survey for long-period variables in a field of view of 20× 30 arcmin² towards the Galactic Centre (GC). We have detected 1364 variables, of which 348 are identified with those reported in Glass et al. We present a catalogue and photometric measurements for the detected variables and discuss their nature. We also establish a method for the simultaneous estimation of distances and extinctions using the period–luminosity relations for the JHK _s bands. Our method is applicable to Miras with periods in the range 100–350 d and mean magnitudes available in two or more filter bands. While J band means are often unavailable for our objects because of the large extinction, we estimated distances and extinctions for 143 Miras whose H - and   K _s  -band mean magnitudes are obtained. We find that most are located at the same distance to within our accuracy. Assuming that the barycentre of these Miras corresponds to the GC, we estimate its distance modulus to be  14.58 ± 0.02 (stat.) ± 0.11 (syst.) mag  , corresponding to  8.24 ± 0.08 (stat.) ± 0.42 (syst.) kpc  . We have assumed the distance modulus to the Large Magellanic Cloud to be 18.45 mag, and the uncertainty in this quantity is included in the above systematic error. We also discuss the large and highly variable extinction. Its value ranges from 1.5 mag to larger than 4 mag in     except towards the thicker dark nebulae and it varies in a complicated way with the line of sight. We have identified mid-infrared counterparts in the Spitzer /IRAC catalogue of Ramírez et al. for most of our variables and find that they follow rather narrow period–luminosity relations in the 3.6–8.0 μm wavelength range.     

Spectral Structure of Small-Scale Turbulent and Mesoscale Fluxes in the Atmospheric Boundary Layer over a Thermally Inhomogeneous Land Surface

Spectral analysis was performed on aircraft observations of a convective boundary layer (CBL) that developed over a thermally inhomogeneous, well-marked mesoscale land surface. The observations, part of the GAME-Siberia experiment, were recorded between April and June 2000 over the Lena River near Yakutsk City. A special integral parameter termed the ‘reduced depth of the CBL’ was used to scale the height of the mixed layer with variable depth. Analysis of wavelet cospectra and spectra facilitated the separation of fluxes and other variables into small-scale turbulent fluctuations (with scales less than the reduced depth of the CBL, approximately 2 km) and mesoscale fluctuations (up to 20 km). This separation approach allows for independent exploration of the scales. Analyses showed that vertical distributions obeyed different laws for small-scale fluxes and mesoscale fluxes (of sensible heat, water vapour, momentum and carbon dioxide) and for other variables (wind speed and air temperature fluctuations, coherence and degree of anisotropy). Vertical profiles of small-scale turbulent fluxes showed a strong decay that differed from generally accepted similarity models for the CBL. Vertical profiles of mesoscale fluxes and other variables clearly showed sharp inflections at the same relative (with respect to the reduced depth of the CBL) height of approximately 0.55 in the CBL. Conventional similarity models for sensible heat fluxes describe both small-scale turbulent and mesoscale flows. The present results suggest that mesoscale motions that reach up to the relative level of 0.55 could be initiated by thermal surface heterogeneity. Entrainment between the upper part of the CBL and the free atmosphere may cause mesoscale motions in that region of the CBL.     

Formal education and disaster response of children: evidence from coastal villages in Indonesia

Natural Hazards - Although children are exposed to a high mortality risk during disasters, what determines their disaster response, especially during earthquakes, remains largely unexplored. The...     

Application of an impact plate – Bedload transport measuring system for high-speed flows

To achieve the sustainable use of dams, the development of methods for sediment management in reservoirs is required. One such method includes the use of Sediment Bypass Tunnels (SBTs) to divert sediment around a dam, thereby preventing sedimentation in the reservoir. However, SBTs are prone to severe invert abrasion caused by the high sediment flux. Therefore, it is necessary to establish a measurement system of the sediment transport rate in these tunnels. One system to measure sediment transport in rivers is the Swiss plate geophone, which can register plate vibrations caused by particle impact. In Japan, the Japanese pipe microphone is used, and sediment transport is measured based on the sound emitted by the particle impact. In this study an attempt was made to optimize the advantages of both systems by fixing a microphone and an acceleration sensor to a steel plate. The results of calibration experiments with this new system are presented and compared with the existing methods. It was found that the acceleration sensor can detect sediment particles larger than 2 mm in diameter. Moreover, a new parameter, referred to as the detection rate, was introduced to describe the correlation between the actual amount of sediment and the registered output. Finally, two parameters - the saturation rate and hit rate - are introduced and exhibit strong correlation with the detection rate.