Higher-Dimensional Anisotropic Modified Holographic Ricci Dark Energy Cosmological Model in Lyra Manifold

Astrophysics - We used modified holographic Ricci dark energy to find anisotropic LRS Bianchi type I cosmological model in five-dimensions based on Lyra geometry. The exact solutions of the...     

Advective accretion flow properties around rotating black holes – application to GRO J1655-40

We examine the properties of the viscous dissipative accretion flow around rotating black holes in the presence of mass loss. Considering the thin disc approximation, we self-consistently calculate the inflow-outflow solutions and observe that the mass outflow rates decrease with the increase in viscosity parameter (\(\alpha \)). Further, we carry out the model calculation of quasi-periodic oscillation frequency (\(\nu _{\mathrm{QPO}}\)) that is frequently observed in black hole sources and observe that \(\nu ^\mathrm{max}_{\mathrm{QPO}}\) increases with the increase of black hole spin (\(a_k\)). Then, we employ our model in order to explain the High Frequency Quasi-Periodic Oscillations (HFQPOs) observed in black hole source GRO J1655-40. While doing this, we attempt to constrain the range of \(a_k\) based on observed HFQPOs (\(\sim \)300 Hz and \(\sim \)450 Hz) for the black hole source GRO J1655-40.     

Elemental (C,N, H and P) and stable isotope (δ<Superscript>15</Superscript>N and δ<Superscript>13</Superscript>C) signatures in sediments from Zeekoevlei,South Africa: a record of human intervention in the lake

We used elemental carbon, nitrogen, phosphorus and hydrogen ratios (C/N, N/P and H/C) with total organic carbon (TOC) and total phosphorus (TP) as well as stable carbon and nitrogen isotopes (δ¹³C and δ¹⁵N) to investigate the source and depositional conditions of organic matter in sediments from Zeekoevlei, the largest freshwater lake in South Africa. Typical C/N (10–12), H/C ratios (≥1.7) and δ¹³C_organic values (−22 to −19‰) together with the increase in TOC concentration indicate elevated primary productivity in lower middle (18–22 cm) and top (0–8 cm) sections of the sediment cores. Seepage of nutrients from a nearby waste water treatment plant, rapid urbanization and heavily fertilized farming in the catchments are responsible for the increased productivity. Consistent with this, measured δ¹⁵N_organic values (∼11‰) indicate increased raw sewage input towards the top-section of the core. Although cyanobacterial blooms are evident from the low δ¹⁵N values (∼3‰) in mid-section of the core, they did not outnumber the phytoplankton population. Low N/P ratio (∼0) and high TP (100–2,200 mg l⁻¹) support cyanobacterial growth under N limited condition, and insignificant input of macrophytes towards the organic matter pool. Dredging in 1983, caused sub-aerial exposure of the suspended and surface sediments, and affected organic matter preservation in the upper mid-section (12–14 cm) of the core.     

Metamorphic reactions in dry and aluminous granulites: a Perple_X <Emphasis Type="Italic">P–T</Emphasis> pseudosection analysis of the influence of effective reaction volume

In high-Mg, Al metapelites, monophase sapphirine corona occur around spinel–corundum aggregates in monomineralic cordierite layers, and bi-phase orthopyroxene–sillimanite aggregates replace locally warped sapphirine in polygonized cordierite aggregates. P–T phase topologies computed (Perple_X software) using compositions of cordierite-rich layers that host the reaction textures did not match the assemblages for the discontinuous reactions spinel + corundum + cordierite → sapphirine and sapphirine + cordierite → orthopyroxene + sillimanite. Instead, the reaction assemblages were reproduced using P–T pseudosection analysis for micro-domain reaction volumes estimated from compositions of product phases in the volume proportion they occur. The results are consistent with known phase relations deduced using Schreinmakers P–T grids. Apparently, the compositions of cordierite-rich layers that hosted the reaction textures were inadequate chemical proxies for determining P–T–X relations of phase-boundary controlled reactions influenced by compositions of the nearest-neighbor minerals in the proportion they react (effective composition), and not in the proportion they existed in the layer/bulk rock. In other words, P–T–X phase topologies and reconstructed P–T paths in dry and aluminous rocks may be best understood by thermodynamic modeling of reactions using effective reaction volume compositions rather than the bulk composition of the rock or the mineralogical layer that host the reaction textures.     

Impact of tsunami on texture and mineralogy of a major placer deposit in southwest coast of India

The great Indonesian earth quake (26 December 2004) triggered a tsunami wave across the Bay of Bengal and Indian Ocean basins and has brought a major havoc in several countries including India. The coastal segment between Thotapalli and Valiazhikal in Kerala state of southwest India, where considerably rich beach placer deposit with ilmenite percentage of more than 70% is concentrated, has been investigated to understand the impact of tsunami on coastal sediments. The grain size analysis flashes out the significant differences between the pre- and post-tsunami littoral environments. While the mineral grains collected during pre-tsunami period show well-sorted nature, the post-tsunami samples represent moderately to poorly sorted nature. Similarly, unimodal and bimodal distributions of the sediments have been recorded for pre- and post-tsunami sediments, respectively. Further, mineral assemblages corresponding to before and after this major wave activity clearly indicate the large-scale redistribution of sediments. The post-tsunami sediments register increasing trends of garnet, sillimanite and rutile. The total heavy mineral percentage of the post-tsunami sediment also shows an improved concentration, perhaps due to the large-scale transport of lighter fraction. Magnetite percentage of post-tsunami samples reflects higher concentration compared to the pre-tsunami samples, indicating the intensity of reworking process. X-ray diffraction patterns of ilmenite grains have confirmed the increased presence of pseduorutile, and pseudobrookite in post-tsunami samples, which could be due to the mixing of more altered grains. SEM examination of grains also confirms the significant alteration patterns on the ubiquitous mineral of placer body, the ilmenite. The reason for these textural, mineralogical and micromorphological changes in heavy minerals particularly in ilmenite, could be due to the churning action on the deeper sediments of onshore region or on the sediments entrapped in the near shelf region of the area, by the ∼ 6 m high tsunami waves.     

Impact of Doppler Radar Wind in Simulating the Intensity and Propagation of Rainbands Associated with Mesoscale Convective Complexes Using MM5-3DVAR System

Pre-monsoon rainfall around Kolkata (northeastern part of India) is mostly of convective origin as 80% of the seasonal rainfall is produced by Mesoscale Convective Systems (MCS). Accurate prediction of the intensity and structure of these convective cloud clusters becomes challenging, mostly because the convective clouds within these clusters are short lived and the inaccuracy in the models initial state to represent the mesoscale details of the true atmospheric state. Besides the role in observing the internal structure of the precipitating systems, Doppler Weather Radar (DWR) provides an important data source for mesoscale and microscale weather analysis and forecasting. An attempt has been made to initialize the storm-scale numerical model using retrieved wind fields from single Doppler radar. In the present study, Doppler wind velocities from the Kolkata Doppler weather radar are assimilated into a mesoscale model, MM5 model using the three-dimensional variational data assimilation (3DVAR) system for the prediction of intense convective events that occurred during 0600 UTC on 5 May and 0000 UTC on 7 May, 2005. In order to evaluate the impact of the DWR wind data in simulating these severe storms, three experiments were carried out. The results show that assimilation of Doppler radar wind data has a positive impact on the prediction of intensity, organization and propagation of rain bands associated with these mesoscale convective systems. The assimilation system has to be modified further to incorporate the radar reflectivity data so that simulation of the microphysical and thermodynamic structure of these convective storms can be improved.     

Sensitivity analysis of support safety factor for predicting the effects of contributing parameters on roof falls in underground coal mines

Roof falls accounted for 18.18% of all fatal accidents in Indian coal mines, contributing about 35.29% of all fatal accidents in below-ground operations in 2005. The support safety factor, always preferred in support planning and design of underground coal mines, may be an important predictor for roof falls. In this paper, geotechnical data were collected from 14 roof fall incident places in an underground coal mine, located in the Eastern India, which has bord and pillar method of workings. The mean value of probabilistic support safety factor for the case study mine was found to be 1.24. However, the probability, of the estimated support safety factor of less than or equal to one, was found to be 0.246. Sensitivity analysis was conducted to analyze the effects of the contributing parameters on support safety factor and the likelihood of the roof fall. The multi-variate regression analysis was carried out for the data generated by Monte Carlo method to correlate the contributing factors to support safety factor. It ranked gallery width as the first parameter to control the support safety factor.     

Surface complexation modeling of Cu(II) adsorption on mixtures of hydrous ferric oxide and kaolinite

Background  

The application of surface complexation models (SCMs) to natural sediments and soils is hindered by a lack of consistent models and data for large suites of metals and minerals of interest. Furthermore, the surface complexation approach has mostly been developed and tested for single solid systems. Few studies have extended the SCM approach to systems containing multiple solids.     

Influence of biotic-abiotic factors on the degradation of novaluron in tropical soil

In this study, the degradation of novaluron (benzoylphenyl urea insect growth regulator) was investigated under controlled laboratory conditions in clay loam alluvial and coastal saline soils of West Bengal, India. The application rates were field rate (FR); 2FR and 10FR. The incubation study was carried out at 30 °C and 60% of maximum water holding capacity of both the soils. Degradation of novaluron in both the soils followed first order reaction kinetics at all application rates under non-sterile and sterile conditions. The half-lives of novaluron in non-sterilized soils ranged from 17.0–17.8 days (alluvial soil) and 11.4–12.7 days (coastal saline soil), while the values in case of the sterilized soils were 53.7–59.0 days (alluvial soil) and 28.9–29.8 days (coastal saline soil) respectively. The novaluron degradation patterns were found to be highly influenced by soil types, application rates, and biotic abiotic factors. Abiotic factors strongly influenced novaluron degradation in both the soils. Biotic degradation was higher in alluvial soil compared to the coastal saline soil.     

Evidence for structural discordance in the inverted metamorphic sequence of Sikkim Himalaya: Towards resolving the Main Central Thrust controversy

Inverted metamorphism in the Himalayas is closely associated with the Main Central Thrust (MCT). In the western Himalayas, the Main Central Thrust conventionally separates high grade metamorphic rocks of the Higher Himalayan Crystalline Sequence (HHCS) from unmetamorphosed rocks of the Inner sedimentary Belt. In the eastern Himalayas, the Inner sedimentary Belt is absent, and the HHCS and meta-sedimentary Lesser Himalayan Sequence (LHS) apparently form a continuous Barrovian metamorphic sequence, leading to confusion about the precise location of the MCT. In this study, it is demonstrated that migmatitic gneisses of the sillimanite zone in the higher structural levels of the HHCS are multiply deformed, with two phases of penetrative fabric formation (S_1HHCS and S_2HHCS) followed by third folding event associated with a spaced, NW-SE trending, north-east dipping foliation (S_3HHCS). The underlying LHS schists (kyanite zone and lower) are also multiply deformed, with the bedding S₀ being isoclinally folded (F_1LHS), and subsequently refolded (F_2LHS and F_3LHS). The contact zone between the HHCS and LHS is characterized by ductile, top-to-the southwest shearing and stabilization of a pervasive foliation that is consistently oriented NW-SE and dips northeast. This foliation is parallel to the S_3HHCS foliation in the HHCS, and the S_2LHS in the LHS. Early lineations in the HHCS and LHS also show different dispersions across the contact shear zone, implying that pre-thrusting orientations of the two units were distinct. The contact shear zone is therefore interpreted to be a plane of structural discordance, shows a shear sense consistent with thrust movement and is associated with mineral growth during Barrovian metamorphism. It may well be considered to represent the MCT in this region.