一种合成2,2-二甲基-4-戊烯酸的方法

报道一种合成２,２－二甲基－４－戊烯酸的新方法。由异丁醛与烯丙醇缩合得到２,２－二甲基－４－戊烯醛,后者经氧化银选择氧化生成２,２－二甲基－４－戊烯酸。此法氧化产率（９６％）高于分子氧氧化法（６１％）和歧化法（４１％）。反应中析出的金属银能定量回收,循环使用。     

川西甲基卡地区西康群砂岩地球化学特征及对物源区、构造背景的指示

松潘-甘孜造山带中部大面积分布西康群浊积岩,为一套厚度巨大(2000～3000 m)的泥质碎屑复理石建造,以深海-次深海海底扇沉积为特征.本文通过对甲基卡稀有金属矿集区分布的西康群砂岩进行主量元素、微量元素及粒度分析,从而揭示该区砂岩构造背景和物源属性.研究结果表明,砂岩样品SiO2、CaO、MgO、Al2 O3、Fe...     

甘孜-玉树断裂带晚第四纪走滑速率与滑动分解作用

滑动速率是研究断裂运动学特征、地震活动性和区域应变分配的重要参数和依据。前人关于甘孜-玉树断裂带滑动速率的研究结果存在较大差异,因此,其晚第四纪滑动速率有待进一步调查研究。本文基于卫星影像解译和野外实地考察,对甘孜-玉树断裂带西段（玉树断裂）上典型断错地貌点进行测量分析,得到玉树断裂晚第四纪走滑速率为6.6±0.1-7.4±1.2mm/a。通过与前人对甘孜-玉树断裂带东段（甘孜断裂）滑动速率的研究结果进行对比,发现甘孜-玉树断裂带东、西段滑动速率不一致,其原因是甘孜断裂的左旋滑移在向西传递的过程中,一部分应变被分配到了巴塘盆地南缘断裂上。巴塘盆地南缘断裂的存在很好地解释了玉树断裂的走滑速率比甘孜断裂偏低的原因。但是,从区域变形来看,巴塘盆地南缘断裂分配的滑动速率恰好说明了甘孜-玉树断裂带东、西段及鲜水河断裂带的水平构造变形是协调一致的。     

Correlation between abnormal trends in the spontaneous fields of tectonic plates and strong seismicities

Tectonic activities, electrical structures, and electromagnetic environments are major factors that affect the stability of spontaneous fields. The method of correlating regional synchronization contrasts(CRSC) can determine the reliability of multi-site data trends or shortimpending anomalies. From 2008 to 2013, there were three strong earthquake cluster periods in the North–South seismic belt that lasted for 8–12 months. By applying the CRSC method to analyze the spontaneous field E_(SP) at 25 sites of the region in the past 6 years, it was discovered that for each strong earthquake cluster period, the E_(SP) strength of credible anomalous trends was present at minimum 30%of the stations. In the southern section of the Tan-Lu fault zone, the E_(SP) at four main geoelectric field stations showed significant anomalous trends after June 2015, which could be associated with the major earthquakes of the East China Sea waters(MS7.2) in November 2015 and Japan's Kyushu island(MS7.3) in April 2016.     

Study on Seismic Damage to Buildings from the 2016 Hutubi MS6.2 Earthquake

Based on the field investigation of the building types and damage caused to them by the Hutubi M_S6.2 earthquake on December 8, 2016, we analyzed the damage characteristics and causes for different types of buildings. In conclusion we put forward some suggestions for the restoration and reconstruction in the earthquake affected area in future.     

Development of solar flares and features of the fine structure of solar radio emission

The reason for the occurrence of different elements of the fine structure of solar radio bursts in the decimeter and centimeter wavelength ranges has been determined based on all available data from terrestrial and satellite observations. In some phenomena, fast pulsations, a zebra structre, fiber bursts, and spikes have been observed almost simultaneously. Two phenomena have been selected to show that the pulsations of radio emission are caused by particles accelerated in the magnetic reconnection region and that the zebra structure is excited in a source, such as a magnetic trap for fast particles. The complex combination of unusual fiber bursts, zebra structure, and spikes in the phenomenon on December 1, 2004, is associated with a single source, a magnetic island formed after a coronal mass ejection.     

大地电磁三维正演并行算法研究

大地电磁法三维正演算法计算量大,用传统的串行程序计算相当耗时。而三维正演是逐个频率按顺序计算的,并行性好,适合并行运算。结合MPI自身的优越性,在深入分析大地电磁三维正演串行程序实现流程的基础上,确定了并行计算的思路,实现了三维正演的并行计算。通过三个理论模型对实现的三维正演并行程序进行了试算,分析对比了在多种情况下程序的执行效率。测试结果表明,所实现的三维正演并行程序运行结果正确,效率提高明显。此思路可为解决其它地球物理超大计算量问题所借鉴。     

安宁河-则木河断裂带及周边地区Rayleigh波群速度背景噪声成像研究

安宁河-则木河断裂带位于川滇地块、巴颜喀拉地块和华南地块的交接部位,是川滇菱形块体的东部重要边界。利用布设在安宁河-则木河断裂带周边区域的西昌台阵和川西台阵均历时两年、共187个宽频带地震台站的垂直分量的背景噪声数据,采用噪声层析成像方法获得了这一区域4~20s的Rayleigh波群速度分布图像。与前人研究相比,本文结果的横向分辨率有明显改进,在安宁河-则木河断裂带可达20km左右,在其它区域可以达到20~40km。成像结果表明,安宁河-则木河断裂地区上地壳的速度结构存在明显横向不均匀性,速度分布特征与地表地质构造基本一致,不同周期的速度分布变化较小。盐源盆地、西昌盆地和四川盆地西南缘表现为低速异常。九龙附近和南部的德昌-盐边-巧家附近表现为高速异常,分别与出露的花岗岩体和峨眉山玄武岩有关。在安宁河断裂南段和则木河断裂北段能观测到断裂两侧的速度存在明显差异,其余断裂带两侧的速度对比不明显。贡嘎山附近的中上地壳表现为明显的低速异常,其东侧和西南侧高速体的阻挡,以及鲜水河-安宁河断裂带走向的变化,在贡嘎山区形成一个挤压弯曲段,使得川滇菱形块体的东南向水平运动转换为垂直于断裂的挤压作用和垂直隆升,导致了贡嘎山的快速隆起。     

Recent progress and application on seismic isolation energy dissipation and control for structures in China

China is a country where 100% of the territory is located in a seismic zone. Most of the strong earthquakes are over prediction. Most fatalities are caused by structural collapse. Earthquakes not only cause severe damage to structures, but can also damage non-structural elements on and inside of facilities. This can halt city life, and disrupt hospitals, airports, bridges, power plants, and other infrastructure. Designers need to use new techniques to protect structures and facilities inside. Isolation, energy dissipation and, control systems are more and more widely used in recent years in China. Currently, there are nearly 6,500 structures with isolation and about 3,000 structures with passive energy dissipation or hybrid control in China. The mitigation techniques are applied to structures like residential buildings, large or complex structures, bridges, underwater tunnels, historical or cultural relic sites, and industrial facilities, and are used for retrofitting of existed structures. This paper introduces design rules and some new and innovative devices for seismic isolation, energy dissipation and hybrid control for civil and industrial structures. This paper also discusses the development trends for seismic resistance, seismic isolation, passive and active control techniques for the future in China and in the world.     

Brittleness characteristics of tight oil siltstones

Rock brittleness directly affects reservoir fracturing and its evaluation is essential for establishing fracturing conditions prior to reservoir reforming. Dynamic and static brittleness data were collected from siltstones of the Qingshankou Formation in Songliao Basin. The brittle–plastic transition was investigated based on the stress–strain relation. The results suggest that the brittleness indices calculated by static elastic parameters are negatively correlated with the stress drop coefficient and the brittleness index B₂, defined as the average of the normalized Young’s modulus and Poisson’s ratio, is strongly correlated with the stress drop. The brittleness index B₂, Young’s modulus, and Poisson’s ratio correlate with the brittle minerals content; that is, quartz, carbonates, and pyrite. We also investigated the correlation between pore fluid and porosity and dynamic brittle characteristic based on index B₂. Pore fluid increases the plasticity of rock and reduces brittleness; moreover, with increasing porosity, rock brittleness decreases. The gas-saturated siltstone brittleness index is higher than that in oil- or water-saturated siltstone; the difference in the brittleness indices of oil- and water-saturated siltstone is very small. By comparing the rock mechanics and ultrasonic experiments, we find that the brittleness index obtained from the rock mechanics experiments is smaller than that obtained from the ultrasonic experiments; nevertheless, both decrease with increasing porosity as well as their differences. Ultrasonic waves propagate through the rock specimens without affecting them, whereas rock mechanics experiments are destructive and induce microcracking and porosity increases; consequently, the brittleness of low-porosity rocks is affected by the formation of internal microcrack systems.