Wavenumber spectra of planetary-scale disturbances in the Mars atmosphere

Wavenumber spectra of the martian atmosphere covering zonal wavenumbers s=1-6 were obtained as a function of latitude and season for the first time from the temperatures measured by the Thermal Emission Spectrometer onboard the Mars Global Surveyor. The stationary component tends to peak at s=2, where the martian topography has large amplitude, and drops rapidly at higher wavenumbers. The transient component in the middle and high latitudes tends to peak at s=1, which is lower than the most unstable wavenumber based on linear theories, and exhibits spectral slopes much flatter than the stationary component. In the equatorial region, the spectra of the transient component are almost flat, indicating that the organization of large-scale structures is less efficient in this region. The spectral shapes are similar between the 0.5 and 2.2 hPa surfaces, except that the slopes are slightly steeper at 0.5 than at 2.2 hPa, probably due to selective vertical transmission at low wavenumbers. The seasonal variation is relatively large in the middle and high latitudes, where the maximum power occurs in winter and the minimum occurs in summer, with an exception that the transient component is maximum in spring in the southern hemisphere. Intensification of s=1 transient waves is observed around the period of the initiation of global dust storms.     

Time-series sediment trap record of alkenones from the western Sea of Okhotsk

C₃₇–C₃₉ alkenones were measured in time-series sediment trap samples collected from August 1998 to June 2000 at two depths in the seasonal sea ice region of the western Sea of Okhotsk, off Sakhalin, in order to investigate alkenone production and water-column processes in the region. Measurable export fluxes of alkenones are ranged from < 0.1 to 5.8 μg/m²/day and clearly showed that the alkenone production was restricted to autumn. In 1998, maximum export flux of alkenones occurred in September when surface water column was well stratified with low nutrients in the surface mixing layer. In the next year, the maximum flux is observed in October. Comparison between alkenone temperature and satellite based sea surface temperature (SST) shows that the estimated alkenone temperatures in August 1998 were found to be  10 °C lower than the temporal satellite SST, suggesting that alkenones are produced in surface to subsurface thermocline layers during the period. Annual mean flux of alkenones is lower in the lower traps than that of the upper traps, suggesting rapid degradation of alkenones in water column, but the U^K₃₇′ value is not significantly altered. This study indicates that U^K₃₇′ values preserved in the surface sediments off Sakhalin reflect the seasonal temperature signal of near surface water, rather than annual mean surface temperature.     

Confined groundwater system in Tokyo

The Musashino Terrace and the Shitamachi Lowland, the main urban areas in the Tokyo metropolis, are in the eastern part of Tokyo and are underlain by thick Quaternary sediments. The geologic structrue of these sediments has a general strike of WNW—ESE, with a gentle dip to the east in the western part of the Musashino Terrace, and strikes generally to the E—W with a gentle dip to the north in the eastern part of the terrace and strikes WNW—ESE to N—S with a very gentle dip to the east in the Shitamachi Lowland. The basal sediments in this area consist chiefly of massive thick silty layers, whereas the sediments overlying them consist of alternating layers of silt, sand, and gravel, which act as confined aquifers throughout the Musashino Terrace and the Shitamachi Lowland. Confined groundwater systems are being developed in the Tama District, the western part of the terrace, and are mainly recharged with river water from the Tama River. The unconfined groundwater system is being developed in the surface layers such as terrace sand and gravel formations and the Kanto Loam Formation. These confined aquifers that are being developed throughout the terrace and the lowland have been exploited for household water supplies and industrial and air-conditioning use for nearly seven decades. The heavy utilization of the confined groundwater, however, has caused a major lowering of groundwater levels. As a result of the lowering of groundwater levels, land subsidence has occurred all over the Lowland and the terrace. At this time the national government and the Tokyo Metropolitan Government restricted groundwater withdrawals for industrial, air-conditioning use and the others except for household supply. Owing to these restrictions, not only have the water levels recovered, but land subsidence has rapidly declined since around 1973.     

Melting of iron–silicon alloy up to the core–mantle boundary pressure: implications to the thermal structure of the Earth’s core

The melting temperature of Fe–18 wt% Si alloy was determined up to 119 GPa based on a change of laser heating efficiency and the texture of the recovered samples in the laser-heated diamond anvil cell experiments. We have also investigated the subsolidus phase relations of Fe–18 wt% Si alloy by the in-situ X-ray diffraction method and confirmed that the bcc phase is stable at least up to 57 GPa and high temperature. The melting curve of the alloy was fitted by the Simon’s equation, P(GPa)/a = (T _m(K)/T ₀) ^c , with parameters, T ₀ = 1,473 K, a = 3.5 ± 1.1 GPa, and c = 4.5 ± 0.4. The melting temperature of bcc Fe–18 wt% Si alloy is comparable with that of pure iron in the pressure range of this work. The melting temperature of Fe–18 wt% Si alloy is estimated to be 3,300–3,500 K at 135 GPa, and 4,000–4,200 K at around 330 GPa, which may provide the lower bound of the temperatures at the core–mantle boundary and the inner core–outer core boundary if the light element in the core is silicon.     

Geology and Mineralization at the Dajing Tin-polymetallic Ore Deposit, Inner Mongolia, China

Abstract: Dajing is a large-scale tin–polymetallic ore deposit in north China with Sn, Cu, Pb, Zn, Ag, and minor elements such as Co and In. The deposit is controlled by a passage-host structure system. Two groups of NE direction faults such as F₂ and F₁ are characterized by sinistral and multiphase activities, and the syn-ore NE faults with their derivative faults nearly in N-S direction constitute an important structure system as channelway for ore fluid. Around F₂ fault (mineralization center), metallic elements display horizontal zoning outwards from Sn, Cu to Cu, Sn, Pb, Zn, Ag and to Pb, Zn, Ag. Controlled by sinistral pull-apart vein system, the WNW direction host structure yielded the ore vein to "W" shape on horizontal plan while to staircase shape on vertical profile. Multiperiodic activities of the host structures system lead to multistage of ore mineralization. Four mineralization stages are recognized in the main mineralization, i.e. 1) cassiterite–arsenopyrite–quartz stage, 2) cassiterite-sulfide (or Cu–poly–metallic mineralization) stage, 3) massive pyrite stage, and 4) galena-sphalerite stage. Besides, fluid activities are identified here at the pre-mineral stage of the formation of quartz veins and sheared deformation, and at the post-mineral stage of quartz–calcite–fluorite deposition.
The earlier tin-rich ore solution raised from NE faults and its nearly N-S derivatives filled the NW-WNW direction fractures, and formed tin ore veins. Subsequent mineralization of Cu-polymetallic stage, pyrite stage and galena-sphalerite stage, overlapping on the same fracture system, sequentially expanded outwards from the fractures, and produced different kinds of ore types and mineralization zoning.     

Collision structure in the upper crust beneath the southwestern foot of the Hidaka Mountains, Hokkaido, Japan as derived from explosion seismic observations

The P-wave velocity structure of the upper crust beneath a profile ranging from Niikappu to Samani in the southwestern foot of the Hidaka Mountains, Hokkaido, Japan was obtained through analysis of refraction and wide-angle reflection data. The mountains are characterized by high seismicity and a large gravity anomaly. The present profile crosses the source region of the 1982 Urakawa-oki earthquake (M_s 6.8). The length of the profile is 66 km striking northwest and southeast. Along the profile, 64 vertical geophones were set up and 5 shot points were chosen. For each shot, a 400–600 kg charge of dynamite was detonated. The studied area is composed of four major geological belts: Neogene sedimentary rocks, the Kamuikotan belt, the Yezo Group, and the Hidaka belt. The measurement line crosses these geological trend at an oblique angle. The structure obtained is characterized by remarkable velocity variations in the lateral direction and reflects the surface geological characteristics. A thin, high-velocity layer (HVL) was found between low-velocity materials in the central part of the profile, beneath the Kamuikotan Metamorphic Belt, at a depth ranging from 0.5 to 6 km, overthrusting toward the west on the low-velocity materials consisting of Neogene sedimentary rocks, and forming gentle folds. Outlines of the velocity structure of the Hidaka Mountains yielded by other studies have shown a large-scale overthrust structure associated with the collision of the Outer Kurile and the Outer Northern Honshu Arcs. The shallow velocity structure inferred by the present study showed a similar (although small scale) overthrust structure. The obtained structure shows that the composite tectonic force, comprising westward movement of the Outer Kurile Arc and northward movement of the Outer Northern Honshu Arc, plays an important role in the evolution of the tectonic features of the crust and upper mantle in a wide depth range beneath the Hidaka Mountains.     

Seismicity and magma supply rate of the 1998 failed eruption at Iwate volcano,Japan

Iwate volcano, Japan, showed significant volcanic activity including earthquake swarms and volcano inflation from the beginning of 1998. A large earthquake of magnitude 6.1 hit the south-west of the volcano on September 3. Although a 1 km² fumarole field formed, blighting plants on the ridge in the western part of the volcano in the spring of 1999, no magmatic eruptions occurred. We reconcile the spatio-temporal distributions of volcanic pressure sources determined by previously reported studies in which GPS, strain and tilt data from dense geodetic station networks are analyzed (Miura et al. Earth Planet Space 52:1003–1008, 2000; Sato and Hamaguchi J Volcanol Geotherm Res 155:244–262, 2006). We calculate the magma supply rates from their results and compare them with the occurrence rates of volcanic earthquakes. The results show that the magma supply rates are almost constant or even decrease with time while the earthquake occurrence rate increases with time. This contrast in their temporal changes is interpreted to result from stress accumulation in the volcanic edifice caused by constant magma supply without effusion of magma to the surface. We further show that data showing slight acceleration in strain can be best explained by magma ascent at a constant velocity, and that there is no evidence for increased magma buoyancy resulting from gas bubble growth. This consideration supports the interpretation that the magma stayed at 2 km depth and horizontally migrated. These findings relating magma supply rate and seismicity to magma ascent process are clues to understanding why no magmatic eruption occurred at Iwate volcano in 1998.     

Shear Strength Behavior of Two Landfill Clay Liners

Direct shear tests were conducted to obtain both the shear strength of compacted clay liners (CCLs) specimens and the interface shear strength between compacted clay liner and base soil. These experiments were conducted under the conditions of five different water contents. The experimental results show that shear strength of both CCLs and CCLs/base interface decreases with the increase in the water content of CCLs and base soil. In addition, the considerate concentration of NaCl in leachate has no deteriorating effect on the shear strength of liners. Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shear strength under a fast compression. The shear strength c‘=100 kPa for sand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normal consolidation, but that the compacted sand-bentonite exhibits over-consolidation.     

Mineral classification from quantitative X-ray maps using neural network: Application to volcanic rocks

We developed a mineral classification technique of electron probe microanalyzer (EPMA) maps in order to reveal the mineral textures and compositions of volcanic rocks. In the case of lithologies such as basalt that include several kinds of minerals, X-ray intensities of several elements derived from EPMA must be considered simultaneously to determine the mineral map. In this research, we used a Kohonen self-organizing map (SOM) to classify minerals in the thin-sections from several X-ray intensity maps. The SOM is a type of artificial neural network that is trained using unsupervised training to produce a two-dimensional representation of multi-dimensional input data. The classified mineral maps of in situ oceanic basalts of the Juan de Fuca Plate allowed us to quantify mineralogical and textural differences among the marginal and central parts of the pillow basalts and the massive flow basalt. One advantage of mineral classification using a SOM is that relatively many minerals can be estimated from limited input elements. By applying our method to altered basalt which contains multiple minerals, we successfully classify eight minerals in thin-section.