Assessment of seismic hazard of roller compacted concrete dam site in Gilgit-Baltistan of northern Pakistan

The proposed site of the Diamer Bhasha Dam in northern Pakistan is situated in an active tectonic zone with intensive seismicity, which makes it necessary for seismic hazard analysis(SHA). Deterministic and probabilistic approaches have been used for SHA of the dam site. The Main Mantle Thrust(MMT), Main Karakaram Thrust(MKT), Raikot-Sassi Fault(RKSF) and Kohistan Fault(KF) have been considered as major seismic sources, all of which can create maximum ground shaking with maximum potential earthquake(MPE). Deterministically estimated MPE for magnitudes of 7.8, 7.7, 7.6, and 7.1 can be produced from MMT, MKT, RKSF and KF, respectively. The corresponding peak ground accelerations(PGA) of 0.07, 0.11, 0.13 and 0.05 g can also be generated from these earthquakes, respectively. The deterministic analysis predicts a so-called floating earthquake as a MPE of magnitude = 7.1 as close as 10 km away from the site. The corresponding PGA was computed as 0.38 g for a maximum design earthquake at the project site. However, the probabilistic analysis revealed that the PGA with 50% probability of exceedance in 100 years is 0.18 g. Thus, this PGA value related to the operational basis earthquake(OBE) is suggested for the design of this project with shear wave velocity(V_(s30)) equal to 760 m/s under dense soil and soft rock conditions.     

Parallel Proton Heating in Solar Wind Using Generalized (r, q) Distribution Function

Kinetic theory is used to calculate the power dissipated by obliquely propagating Alfvén waves to heat the solar wind protons, using the Generalized (r, q) distribution function. The evolution of power dissipation of protons with increasing heliocentric distance is subsequently determined. Comparison between theoretical and observational results with data shows good agreement, especially for the slow solar wind streams. Previous results where a Maxwellian distribution function was used to calculate the power dissipated did not match well with observations.     

Factors determining the economic value of groundwater

Increasing groundwater extraction threatens aquifer sustainability for future generations. Making the best use of limited groundwater resources requires knowledge of its alternative extractive and non-extractive values, as well as the cost of extraction and the hydrological interlinkages between alternative uses. Groundwater value is driven by a number of factors including its supply and demand and institutional and policy factors. These factors and how they affect value of groundwater are described. Also described are the various components relevant to the economic valuation of groundwater and there is discussion on the potential difficulties in their practical estimation. It is argued that groundwater management is essential when there are large potential spatial and temporal externalities related to groundwater pumping. Maintaining non-extractive and option values is likely to require trade-offs with current extractive uses. Well-informed management will be required to allocate groundwater efficiently between different users such as agriculture, industry and the environment, while also balancing the needs of current and future generations.     

Estimation of climatic transition in Riyadh (Saudi Arabia) in global warming perspectives

The present exercise is a study to enquire into the recent climatic transition, if any in Riyadh, Saudi Arabia. Conventional climatic indicators such as rainfall distribution, temperature regime, relative humidity, sunshine duration, wind velocity and evaporation characteristics were examined over a period of twenty six years of available meteorological data. The analyses showed a remarkable mutual resemblance and unidirectional trend in all the temperature parameters like absolute monthly maximum, absolute monthly minimum, mean monthly maximum, mean monthly minimum and mean monthly temperatures and the mean monthly maximum and mean monthly minimum relative humidities. Similarly, the trends in sunshine duration, wind velocity and pan evaporation were also supportingly in accordance to the general trends of climatic transition. The analysis based on a smaller period climatic data shows a good deal of agreement with the trends of studies on global warming projections made by simulated models on the basis of CO₂ concentration changes in the atmosphere.     

Novel Calix[4]arene‐based Amberlite XAD‐4 Modified Resin for As(III) Removal from Water

The present article describes As(III) sorption behavior of novel calix[4]arene appended TS‐4 resin. The sorption ability of TS‐4 resin has been evaluated at wide range of pH, i.e., pH 2–14. The maximum As(III) sorption efficiency (95%) was achieved at pH 2, which shows that the TS‐4 resin possesses greater affinity for As(III) at this pH. Column sorption mechanism was evaluated through various operating parameters, i.e., change in concentration, flow rate, bed heights, and pH. The experimental data were also tested against bed depth service time model and from the results; it has been observed that the data is in close agreement with the theoretically calculated values. Thus, from the data it has been revealed that TS‐4 resin has maximum column efficiency of 0.13 mmol g^?1. Application of TS‐4 to real samples indicates a slight decrease (2–3%) in extraction efficiency of TS‐4 because of high concentration of total dissolved salts. Thermal behavior was tested by differential scanning calorimetry and it has been observed that TS‐4 resin is stable up to 160°C. TS‐4 resin was found to be regenerable and best regeneration was achieved by using 4% solution of NaOH. It can be deduced from the study that the resin will find its applicability in small as well as industrial scale water purification plants.     

Nonlinear kinetic Alfven waves in space plasmas with generalized ($$) distribution

In this paper, we have investigated linear and nonlinear propagation of kinetic Alfven waves in which the electrons have been assumed to follow generalized (\(r,q\)) distribution. We have shown that (\(r,q\)) distribution gives us most of the distributions observed in space plasmas. We have varied the flatness parameter \(r\) and the tail parameter \(q\) to explore the linear and nonlinear propagation characteristics of kinetic Alfven waves. We have also discussed the limiting cases. It has been shown that our results agree well with Fast and Freja observations of the nonlinear kinetic Alfven waves. An important feature of our study is the formation of rarefactive solitary structures. It has been shown that this result cannot be obtained with Maxwellian distribution and that it agrees well with the observations of Fast and Freja satellites.     

Two-dimensionality on spherical earth — A problem in gravity reductions

Summary A mass distribution which remains constant perpendicular to a diameter, within the walls of a vertical cylinder, is defined as a bounded two-dimensional mass distribution. Assumption of such a distribution may be more realistic than the assumption of an unbounded two-dimensional distribution in many situations. The gravity effect of such a distribution is comparable with the effect calculated by conventional three-dimensional methods of reduction. The effect of sphericity of the earth may be allowed as an additional correction. For the calculation of the gravitational effect of this distribution, a formula for the attraction of a cylindrical strip, at a point on the axis, is derived. The effect is compared with that of a two-dimensional distribution. To calculate the effect of sphericity, a formula for the attraction of a spherical cap is derived and this attraction is compared with that of a flat disc. The proposed distribution and the correction for sphericity are particularly applicable in marine gravity reductions.     

GIS-based landslide susceptibility evaluation using fuzzy-AHP multi-criteria decision-making techniques in the Abha Watershed,Saudi Arabia

Landslides are natural geological disasters causing massive destructions and loss of lives, as well as severe damage to natural resources, so it is essential to delineate the area that probably will be affected by landslides. Landslide susceptibility mapping (LSM) is making increasing implications for GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. It is considered to be an effective tool to understand natural disasters related to mass movements and carry out an appropriate risk assessment. This study is based on an integrated approach of GIS and statistical modelling including fuzzy analytical hierarchy process (FAHP), weighted linear combination and MCE models. In the modelling process, eleven causative factors include slope aspect, slope, rainfall, geology, geomorphology, distance from lineament, distance from drainage networks, distance from the road, land use/land cover, soil erodibility and vegetation proportion were identified for landslide susceptibility mapping. These factors were identified based on the (1) literature review, (2) the expert knowledge, (3) field observation, (4) geophysical investigation, and (5) multivariate techniques. Initially, analytical hierarchy process linked with the fuzzy set theory is used in pairwise comparisons of LSM criteria for ranking purposes. Thereafter, fuzzy membership functions were carried out to determine the criteria weights used in the development of a landslide susceptibility map. These selected thematic maps were integrated using a weighted linear combination method to create the final landslide susceptibility map. Finally, a validation of the results was carried out using a sensitivity analysis based on receiver operator curves and an overlay method using the landslide inventory map. The study results show that the weighted overlay analysis method using the FAHP and eigenvector method is a reliable technique to map landslide susceptibility areas. The landslide susceptibility areas were classified into five categories, viz. very low susceptibility, low susceptibility, moderate susceptibility, high susceptibility, and very high susceptibility. The very high and high susceptibility zones account for 15.11% area coverage. The results are useful to get an impression of the sustainability of the watershed in terms of landsliding and therefore may help decision makers in future planning and mitigation of landslide impacts.     

The use of low frequencies in a full‐waveform inversion and impedance inversion land seismic case study

Velocity model building and impedance inversion generally suffer from a lack of intermediate wavenumber content in seismic data. Intermediate wavenumbers may be retrieved directly from seismic data sets if enough low frequencies are recorded. Over the past years, improvements in acquisition have allowed us to obtain seismic data with a broader frequency spectrum. To illustrate the benefits of broadband acquisition, notably the recording of low frequencies, we discuss the inversion of land seismic data acquired in Inner Mongolia, China. This data set contains frequencies from 1.5–80 Hz. We show that the velocity estimate based on an acoustic full‐waveform inversion approach is superior to one obtained from reflection traveltime inversion because after full‐waveform inversion the background velocity conforms to geology. We also illustrate the added value of low frequencies in an impedance estimate.