A comparison of several wave spectra for the random wave diffraction by a semi-infinite breakwater

A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications.     

Nocdap results: On the relationship of extreme waves and currents for design of offshore structures

Simultaneous wind, wave, and current data during 21 storms spanning four winters at Tromsøflaket (230 m depth) were analysed to determine joint probabilities of occurrence. Waves were measured with a Waverider Buoy, winds with a recording anemometer onboard a vessel and currents at up to five depths with Aandera RCM-4 current meters. Measured currents were filtered to separate tidal currents from residual currents. In most of the statistical analyses, the actual current profiles were replaced with a simplified “equivalent” profile (constant above 50 m depth) whose magnitude was chosen to give the same drag load on a single pile as the actual profile when both profiles were combined with wave orbital velocities. The data suggest that the equivalent current is weakly correlated with the wave height. Within the range of the data analysed, an in-line equivalent residual current of 30 cm sec⁻¹ is adequate for design drag force calculations.The data presented here are used to illustrate a procedure for data analysis and are not suitable for use as design criteria.     

Identification of Pb sources in Yellow Sea sediments using stable Pb isotope ratios

Rapid economic developments in East Asian countries have inevitably resulted in environmental degradation in the surrounding seas, and concern for both the environment and protection from pollutants is increasing. Identification of sources of contaminants is essential to environmental pollution management. In this study, the provenance of anthropogenic lead (Pb), a major pollutant of Yellow Sea sediments, was determined for river mouth sediments, including those of the Changjiang, Huanghe, Han, and Geum Rivers, and for age-determined shelf core sediments through the measurement of Pb isotope ratios in the HCl-leached fraction using multi-collector inductively coupled plasma-mass spectrometry (MC ICP/MS). Anthropogenic Pb has accumulated in shelf core sediments since 1910, and its isotope ratios were estimated as 0.863–0.866 and 2.119–2.125 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively, from the mixing relationships of the two endmembers. River mouth sediments exhibited enough distinction in anthropogenic Pb isotope ratios to be discriminated: 0.874 (2.144) in the Huanghe, 0.856 (2.129) in the Han, 0.857 (2.122) in the Geum, and 0.854 (2.101) in the Changjiang for ²⁰⁷Pb/²⁰⁶Pb (²⁰⁸Pb/²⁰⁶Pb), respectively. Although isotope ratios of geogenic Pb in sediments dating before 1910 showed narrow ranges (0.842–0.845 and 2.088–2.100 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), distinct isotope ratios in each core permitted source identification of sediments in the Yellow Sea based on geographic locations and the geogenic Pb of each river. By comparing the isotope ratios of the estimated anthropogenic Pb to source-related materials, the provenances of anthropogenic Pb in Chinese river sediments were presumed to be Chinese coal or ore, which is also a major source of atmospheric particulate Pb. The anthropogenic Pb in the shelf core sediments in the northern Yellow Sea originated from northern Chinese cities such as Beijing and Tianjin through atmospheric pathways. Pb isotope ratios indicated that Pb in Korean river sediments was characteristic of local Korean ores.     

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.     

A study on the polarimetric properties of various features using SIR-C data

Spaceborne Imaging Radar (SIR-C) data acquired over Gujarat, India in 1994 were processed and analysed using differnet techniques applicable to polarimetric SAR data such as polarization signatures, polarization index, decomposition of the signal and polarization phase difference and limited groundtruth data. It has been observed that multi-frequency polarimetric data enhances the potential of retrieving geo-physical parameters. The polarization signatures are found to vary with the nature of the target. Target decomposition of the returned signal will be useful for the classification of various features. Polarization Phase Difference (PPD) gives good information about the vegetation parameters.     

GPS signal acquisition using the repeatability of successive code phase measurements

This paper introduces a new method for GPS signal acquisition, which is based on the repeatability of successive code phase measurements and the M-of-N search algorithm. The performance of the proposed method in terms of probability of signal detection is similar to that of traditional methods, except that the calculation of the probability of detection does not rely on the noise distribution or the Carrier-to-Noise ratio (C/N₀). The code phase repeatability-based method is presented along with equations for probability of detection and probability of false detection. If the distribution of the noise is known, it also provides an estimate of the C/N₀. The proposed method is illustrated for coherent and non-coherent acquisition and C/N₀ estimation.     

Uncertainty as the overlap of alternate conditional distributions

An important task in modern geostatistics is the assessment and quantification of resource and reserve uncertainty. This uncertainty is valuable support information for many management decisions. Uncertainty at specific locations and uncertainty in the global resource is of interest. There are many different methods to build models of uncertainty, including Kriging, Cokriging, and Inverse Distance. Each method leads to different results. A method is proposed to combine local uncertainties predicted by different models to obtain a combined measure of uncertainty that combines good features of each alternative. The new estimator is the overlap of alternate conditional distributions.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.     

Origin of the hydrocarbon component of carbonaceous chondrites: the star-meteorite connection

We report the results of an experiment that produced a residue which closely matches the hydrocarbon component of the Murchison carbonaceous chondrite. This experiment suggests that the parent material of the meteoritic component originated as polycyclic aromatic hydrocarbon species in carbon stars during their later stages of evolution. The experiments also indicate that the pathway from those formation sites to eventual incorporation into the meteorite parent body involved hydrogenation in a plasma in the solar nebula or in H II regions prior to the solar nebula. This model is consistent with what is known about the meteoritic hydrocarbon component including deuterium abundance, the observation of cosmic infrared emission bands best attributed to polycyclic aromatic hydrocarbon molecules, and the inherent stability of these molecules that allows their formation in stars and subsequent survival in the interstellar medium.