Partial Melting of Metapelitic Rocks Beneath the Bushveld Complex, South Africa

Metapelitic rocks in the aureole beneath the Bushveld Complexpreserve evidence for both high- and low-a_H2O anatexis. Theaureole is characterized by an inverted thermal structure inwhich suprasolidus rocks potentially interacted with an H₂O-richvolatile phase derived from underlying, dehydrating rocks. Atlower grade (T < 700°C) the rocks contain fibrolite matsand seams that record local redistribution of volatiles. Incongruentreactions consuming biotite produced small quantities (<1mol %) of liquid and peritectic cordierite that remained trappedwithin the mesosome. Larger volumes of melt (3–4%), preservedas coarse-grained discordant leucosomes, were produced by congruentmelting following a structurally focused influx of H₂O. Subhorizontalvolatile-phase flow was concentrated within thin (     

Borings and bioerosion in fossils

Ancient marine organisms that excavated holes in shells and other calcium carbonate substrates on the sea bed have not been widely studied by palaeontologists. Together with scrape and scratch marks made by rasping grazers on shell surfaces, they constitute a group of hard–substrate trace fossils that have many modern equivalents. Even the smallest forms can be studied by casting the holes in plastic resin and dissolving the shell. The variety of borers increased in the Mesozoic Era, thereby avoiding the attentions of predatory groups that were radiating at the same time.     

Zircon alteration,formation and preservation in sandstones

Zircon textures, chemistry and microstructures have been characterized in situ within Carboniferous sandstones from the Midland Valley of Scotland using back‐scattered electron and cathodoluminescence images, electron backscatter diffraction techniques and chemical analyses. The study of polished thin sections reveals a variety of zircon types including unmodified detrital zircon, zircon outgrowths and different forms of modified zircon that formed in low‐temperature conditions within the sedimentary rocks. These rocks have only experienced temperatures of <100 °C during burial; however, altered zircon is abundant and characterized by a low mean atomic number, with relatively high contents of non‐formula elements and a nano‐crystalline or microcrystalline structure. It forms by replacement of detrital zircon that subsequently became metamict. Two types of replacement mechanisms are effective in sedimentary environments and involve either dissolution–reprecipitation or solid‐state reaction, but both require fluid access to the radiation‐damaged areas. The former process appears to become the dominant replacement mechanism as temperature increases and produces highly porous, inclusion‐rich zircon. Metamict zircon is extremely reactive in near‐surface conditions and the production of low‐temperature zircon is sensitive to both parent zircon characteristics and environmental conditions. As such, the alteration of zircon has the potential to yield unique information on the diagenetic history of sedimentary rocks. Low‐temperature zircon would be unlikely to survive sedimentary transport or the rock crushing procedures that characterize many investigations of detrital zircon populations and consequently may generate severe biases in studies of this type.     

Calculation of Phase Relations Involving Haplogranitic Melts Using an Internally Consistent Thermodynamic Dataset

A simple thermodynamic model is developed for silicate meltsin the system CaO–Na₂O–K₂O–Al₂O₃–SiO₂–H₂O(CNKASH). The Holland & Powell (Journal of Metamorphic Geology,16, 289–302, 1998) internally consistent thermodynamicdataset is extended via the incorporation of the experimentallydetermined melting relationships in unary and binary subsystemsof CNKASH. The predictive capability of the model is evaluatedvia the experimental data in ternary and quaternary subsystems.The resulting dataset, with the software THERMOCALC, is thenused to calculate melting relationships for haplogranitic compositions.Predictions of the P–T stabilities of assemblages in water-saturatedand -undersaturated bulk compositions are illustrated. It isnow possible to make useful calculations of the melting behaviourof appropriate composition rocks under crustal conditions. KEY WORDS: thermodynamics; melts; granite; dataset     

Internal structure of aeolian dunes in Abu Dhabi determined using ground-penetrating radar

A ground-penetrating radar survey of aeolian dunes in the Al Liwa area of Abu Dhabi reveals a variety of dipping reflectors which are interpreted as primary sedimentary structures. The interpretation of the radar profiles has been confirmed by bulldozing trenches through the study area and comparing logged sections in the trenches with the radar profiles. NNW— SSE-orientated radar profiles, approximately parallel to the prevailing wind direction, show two sets of dipping reflectors which are interpreted as sets of cross-stratification and second- and third-order bounding surfaces. Radar profiles orientated WSW—ENE across the prevailing wind direction are dominated by concave-up reflectors which are interpreted as trough-shaped scours and sets of trough cross-stratification produced by oblique progradation of barchanoid dunes. Nested troughs, with small sets of trough cross-stratification within larger troughs, may be due to reactivation following wind reversal, or the superposition of small dunes on larger dunes and the fill of large dune troughs by smaller dunes. Convex-upwards reflectors are interpreted as linear spurs on the convex portions of sinuous dunes or erosional remnants between troughs. Overall there is a tendency for the larger second-order bounding surfaces to dip downwind, which confirms Brookfield's ideas of the relative migration paths of dunes and draa.     

Exploring CO pollution episodes observed at Rishiri Island by chemical weather simulations and AIRS satellite measurements: long-range transport of burning plumes and implications for emissions inventories

The summer of 2003 was an active forest fire season in Siberia. Several events of elevated carbon monoxide (CO) were observed at Rishiri Island in northern Japan during an intensive field campaign in September 2003. A simulation with a global chemistry-transport model is able to reproduce the general features of the baseline levels and variability in the observed CO, and a source attribution for CO in the model suggests that the contribution from North Asia dominated, accounting for approximately 50% on average, with contributions of 7% from North America and 8% from Europe and 30% from oxidation of hydrocarbons. With consideration of recent emission estimates for East Asian fossil fuel and Siberian biomass burning sources, the model captures the timing and magnitude of the CO enhancements in two pollution episodes well (17 and 24 September). However, it significantly underestimates the amplitude during another episode (11–13 September), requiring additional CO emissions for this event. Daily satellite images from AIRS reveal CO plumes transported from western Siberia toward northern Japan. These results suggest that CO emissions from biomass burning in western Siberia in 2003 are likely underestimated in the inventory and further highlight large uncertainties in estimating trace gas emissions from boreal fires.     

Short-term morphological change and sediment dynamics in the intertidal zone of a macrotidal beach

This paper describes the morphological and sedimentological evolution of a macrotidal beach over a 20 day period under varying hydrodynamic conditions (significant breaker heights of 0·3–2 m and tidal ranges of 2–5 m). During the field campaign, an intertidal bar developed around the mid‐tide level, migrated onshore, welded to the upper beach and was then flattened under energetic wave conditions. The bar had a wave breakpoint origin and its formation was triggered by a reduction in tidal range, causing more stationary water‐level conditions, rather than an increase in wave height. Most of the onshore bar migration took place while the bar was positioned in the inner to mid‐surf zone position, such that the bar moved away from the breakpoint and exhibited ‘divergent’ behaviour. The depth of disturbance over individual tidal cycles was 10–20% of the breaker height. Such values are more typical of steep reflective beaches, than gently sloping, dissipative beaches, and are considered to reflect the maximum height of wave‐generated ripples. The grain size distribution of surficial sediments did not vary consistently across the beach profile and temporal changes in the sedimentology were mostly unrelated to the morphological response. The lack of clear links between beach morphology and sedimentology may be in part due to shortcomings in the sampling methodology, which ignored the vertical variability in the sediment size characteristics across the active layer.     

Criteria for the recognition of salt-pan evaporites

Layered evaporites can accumulate in: (1) ephemeral saline pans, (2) shallow perennial lagoons or lakes, and (3) deep perennial basins. Criteria for recognizing evaporites deposited in these settings have yet to be explicitly formulated. The characteristics of the ephemeral saline pan setting have been determined by examining eight. Holocene halite-dominated pans (salt pans) and their deposits (marine and non-marine) from the U.S., Mexico, Egypt and Bolivia. These salt pans are typified by alternating periods of flooding, resulting in a temporary brackish lake, evaporative concentration, when the lake becomes saline, and desiccation, which produces a dry pan fed only by groundwater. The resulting deposits consist of alternating layers (millimetres to decimetres) of halite and mud. The layers of halite are characterized by: (1) vertical and horizontal cavities, rounded crystal edges and horizontal truncation surfaces, due to dissolution during flooding; (2) vertical ‘chevrons’ and ‘cornets’ grown syntaxially on the bottom during the saline lake stage; (3) halite cements (overgrowths and euhedral cavity linings) and disruption of layering into metre-scale polygons, produced during the desiccation stage. The muddy interbeds are characterized by displacive growth of halite during the desiccation stage. Immediately below the surface of the pan the halite layers are ‘matured’ by repeated episodes of dissolution and diagenetic crystal growth. This results in porous crusts with patches of ‘chevron’ and ‘cornet’ crystals truncated by dissolution, clear diagenetic halite cement, and internal sediment. These layers of ‘mature’ halite closely resemble the patchy cloudy and clear textures of ancient halite deposits. Holocene salt-pans are known to cover thousands of square kilometres and cap halite deposits hundreds of metres thick, so they are realistic models for ancient evaporites in scale, e.g. Permian Salado Formation of New Mexico-Texas, which preserves many primary salt-pan features.