桂北豆乍山岩体放射性地球化学特征及其干热岩资源潜力研究

对桂北豆乍山岩体钻孔样品进行了放射性生热元素含量、岩石密度和岩石热导率测试.结果 显示该岩体花岗岩U平均含量为17.49×10-6,Th平均含量为27.54×10-6,K2O平均含量为4.64％,放射性生热率平均值6.46 μW/m3,高于地壳平均值及大部分华南其他岩体的放射性生热率值;岩石密度平均在2.57 g/cm...     

测井预测TOC方法在页岩储层评价中的运用

总有机碳含量(TOC)是页岩储层评价中的一个重要参数,同时也是烃源岩评价的重要指标.本论文在测井原理的指导下,基于不同岩石类型对测井参数的响应特征,运用自然伽马能谱测井法、多元回归法和△ LogR 法对四川盆地南部龙马溪组页岩的TOC含量进行预测,通过数理统计和误差分析,选出最佳预测方法.研究结果表明:四川盆地南部页岩...     

Genetic diversity and differentiation of three populations of Penaeus monodon Fabricus

Genetic diversity of two wild Penaeus monodon populations sampled from the coastal waters of Qinglan （ Hainan Province of China, HN） and Malaysia （KD）, and the F1 generation of a Thailand broodstock population （CP） were examined by vertical polyacrylamide gel electrophoresis. Of 21 loci encoded by ten enzymes, 11 were polymorphic. The mean proportions of polymorphic loci of HN, KD and CP were 36. 36%, 45.45% and 50.00% , with the average heterozygosities of 0.135, 0.181 and 0.191, and the effective numbers of alleles per loci were 1. 300, 1. 330 and 1. 329, respectively. The divergent indexes of HN, KD and CP were0.023, 0.124, and 0.117, respectively. The genetic distance between the two wild populations was 0.005, and the gene differentiation coefficient was also very low （0.014）. The results indicated that the F1 generation population had a higher genetic diversity than the two wild populations, and that the HN population had the lowest one. There was no significant differentiation between HN and KD populations and all populations existed with a slight heterozygote excess.     

基于GIS技术的耕地坡度分级方法

分析传统耕地坡度分级方法的缺陷,提出利用GIS技术的耕地坡度分级新方法。以枝江市董市镇为例实证,研究制定定量融合指标和工作流程,不仅有效地控制了耕地图斑的数量,而且确保利用耕地坡度分级数据统计汇总的各耕地坡度级面积数据与真实值基本一致,提高了汇总面积数据的精度。     

Time-Domain Full Waveform Inversion Using the Gradient Preconditioning Based on Transmitted Wave Energy

The gradient preconditioning approach based on seismic wave energy can effectively avoid the huge memory consumption of the gradient preconditioning algorithms based on the Hessian matrix. However, the accuracy of this approach is prone to be influenced by the energy of reflected waves. To tackle this problem, the paper proposes a new gradient preconditioning method based on the energy of transmitted waves. The approach scales the gradient through a precondition factor, which is calculated by the ‘approximate transmission wavefield' simulation based on the nonreflecting acoustic wave equation. The method requires no computing nor storing of the Hessian matrix and its inverse matrix. Furthermore, the proposed method can effectively eliminate the effects of geometric spreading and disproportionality in the gradient illumination. The results of model experiments show that the time-domain full waveform inversion(FWI) using the gradient preconditioning based on transmitted wave energy can achieve higher inversion accuracy for deep high-velocity bodies and their underlying strata in comparison with the one using the gradient preconditioning based on seismic wave energy. The field marine seismic data test shows that our proposed method is also highly applicable to the FWI of field marine seismic data.     

Simulation Study of Potential Impacts of Tidal Farm in the Eastern Waters of Chengshan Cape,China

The sea area east of Chenshan Cape has peak tidal current flows that exceed 2.3 m s-1, which make it a promising site for the development of tidal current energy. Before these resources can be exploited, a comprehensive assessment is needed of the potential environmental impacts of the extraction of this energy. In this paper, we describe our construction of a three-dimensional hydrodynamic model of the waters near Chengshan Cape, and verify the performance of the model using continuous data measured in situ. We modeled the potential impacts of the exploitation of these resources on the flow field by adding a momentum loss term in the governing equation of the model. Simulation results show that an assumed tidal farm with an estimated power output of 20.34 MW would have a significant impact on the surrounding water level, especially next to the farm, where fluctuation could reach 6 cm. The maximum drop in the flow velocity in the wake of the farm was predicted to be more than 0.8 m s-1, and this influence would extend 10 km downstream.     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

全球主要河流流域碳酸盐岩风化碳汇评估

碳酸盐岩风化吸收的大气CO₂主要以HCO₃ ^-形式连续地经由河流从大陆输送到海洋,成为陆地生态系统的重要碳汇。目前主要河流流域的碳酸盐岩风化碳汇估算存在不确定性,分布格局尚不清晰。基于GEMS-GLORI全球河流数据库提供的全球10万km ²以上主要河流流域多年平均监测数据,利用水化学径流法估算出全球主要河流流域碳酸盐岩对CO₂的吸收速率为0.43±0.15 Pg CO₂ yr ^-1,平均CO₂吸收通量为7.93±2.8 t km ^-2 yr ^-1。CO₂吸收通量在不同气候带下差异显著,热带和暖温带CO₂年吸收速率占全球主要河流流域年吸收速率的62.95%。冷温带CO₂年吸收速率占全球主要河流流域的33.05%,仅次于热带地区。本文划分出全球CO₂吸收通量的9个关键带,关键带的交汇处CO₂吸收通量较高。喀斯特出露流域碳酸盐岩对CO₂吸收通量的均值为8.50 t km ^-2 yr ^-1,约为非喀斯特流域的3倍。全球喀斯特出露流域碳酸盐岩风化碳汇在全球碳循环、水循环及碳收支平衡估算研究方面占据重要地位。     

基于EEMD和ARIMA的海温预测模型研究

类型丰富、时空分辨率高的海洋探测数据,为信号分解和机器学习算法的应用提供了可能。本文针对如何建立有效的海温预测模型这一问题,使用高时空分辨率的海表温度(SST)融合产品,引入信号处理领域的集合经验模态分解(EEMD)和机器学习领域的自回归积分滑动平均模型(ARIMA)。首先利用最适于分解自然信号的EEMD方法,将海温数据分解成多个确定频率的序列;再利用ARIMA分别对各个频率的序列进行预测,最后将各个序列的预测结果进行组合。该方法在丰富数据的支撑下,比以往直接使用海温数据所建立的预测模型精度更高,为更好地进行海温预测提供了新方法。     

基于Pearson关联模型的长三角地区海洋战略性新兴产业发展的影响因素

为优化长三角地区海洋战略性新兴产业布局,促进区域海洋经济的转型升级,文章采用Pearson关联模型,选取2014年长三角地区11个沿海城市的代表性数据,分别计算和分析海洋战略性新兴产业增加值与其影响因素的相关系数,并提出建议。研究结果表明:长三角地区海洋战略性新兴产业发展较好,但存在增速较缓和区域不平衡等问题;与长三角地区海洋战略性新兴产业增加值极强相关和强相关的主要为经济发展水平和科技支撑力度2个方面的影响因素;长三角地区海洋战略性新兴产业布局应优先考虑经济和科技较发达的城市,并逐渐带动和辐射其他沿海城市和周边内陆城市,促进整体发展。