Book review

Proceedings of the Symposium on Tide Recording, edited by R. Britton. (The Hydrographic Society Special Publication No. 4, The Hydrographic Society at North East London Polytechnic, Dept. of Land Surveying, London, U.K.) 203 pp., paper cover.     

A Simple Method to Minimize Orientation Effects in a Profiling Radiometer

Marine optical parameters required for ocean color satellite applications must be measured with high accuracy and errors within the permissible limits. These stringent requirements demand careful measurements of optical parameters. Though the free-fall radiometer is found to be a better option for measuring underwater light parameters as it avoids the effects of ship shadow and is easy to operate, the measurements demand profiling the radiometer vertical in water with minimum tilt. Here we present the results of our observations on the tilts of the radiometer from the measurements in the Arabian Sea. Since there is hardly any study carried-out on the tilt of the profiling radiometer, the result of this study will help in the better design of such marine instruments. The tilt of the radiometer near the surface of the water is attributed to the mode of deployment and environment parameters, while the tilt at depth of the water is influenced by the density variations of the water. Here we also demonstrate a method of deploying the instrument that minimizes the tilt of the instrument at the surface layer of the water.     

Ferromanganese Nodules and Crusts from the Christmas Island Region,Indian Ocean

A sampling expedition has shown that largely hydrogenetic marine ferromanganese deposits occur in the Christmas Island region south of Java (~10°S), as small nodules on seamount slopes and abyssal plains (red clay), and as thick crusts on volcanic ridges and seamounts. Vernadite is dominant, with birnessite, jacobsite and todorokite common. Nodules were recovered in 25% of free-fall grab stations in water 4600-5900 m deep, and are not abundant where present. The nodules average 9.6% Fe, 19.7% Mn, 0.51% Ni, 0.49% Cu, and 0.12% Co. Crusts are common in water 1450-3700 m deep, with average deposition rates of 1-1.5 mm / m.y. The crusts average 13.9% Fe, 16.2% Mn, 0.35% Ni, 0.11% Cu, and 0.44% Co. Cobalt grades are higher (~0.8%) in shallower water ( < 2500 m), so future exploration should concentrate on depths of 500-1500 m near the oxygen minimum zone.     

Influence of salinity on permeability characteristics of marine sediments

Abstract

Laboratory tests were conducted on compacted marine sediments to study the effect of salt concentration of permeating fluid on its permeability characteristics. Deep sea sediment samples were collected from water depths varying from 3700 to 4500 m off Mauritius coast. Liquid limit and plasticity index varied widely from 45 to 75 and 10 to 35, respectively. Permeability was found at different void ratios with distilled water and 0.2, 0.4, and 0.8 N NaCl solutions as permeating fluid. It was found that permeability increases with an increase in salt concentration for a given void ratio. This is explained by diffused double layer theory. Also, the rate of increase in permeability decreases with increase in salt concentration. The effect of salt concentration seemed to be less at higher void ratios.     

Suction force below plate anchors in soft clay

The results of a number of laboratory model tests for the short‐term ultimate uplift capacity of a circular plate anchor embedded in saturated soft kaolinite and montmorillonite are presented. The tests were conducted with and without venting the bottom of the plate anchor in order to determine the variation of the suction force with embedment ratio. The variation of the suction force is presented in terms of the undrained shear strength of the clay and also the net ultimate uplift capacity.     

Ten Years of Studies on Maryland's Inner Continental Margin and Coastal Bays

During the past ten years of the Association of American State Geologists-Mineral Management Service Continental Margins Program, the Maryland Geological Sur vey investigated the sedimentological, paleontological, stratigraphical and geophysi cal character of Maryland's inner continental shelf. Based on seismic records and sedimentological analyses completed during the first four years, a late Quaternary stratigraphic model was developed. Five distinct stratigraphic units were identified and described on the Maryland inner shelf. These units represent late Pleistocene interglacial deposits, the oldest of which corresponds to pre-Illinoian (oxygen-isotope stages 7 and or 9) transgressive shelf sands. Overlying the Q1 unit, the Q2 unit is a 6-meter thick mud sequence of oxygen-isotope stage 5 (128-75 ka) age. Units Q3 and Q4 representing fluvial and leading edge estuarine deposits (oxygen-isotope stages 4, 3 and 2) filled numerous paleochannels that were incised into units Q2 and Q1. Modern trailing-edge transgressive shelf shoals (Unit Q5) discontinuously cap the sequence. The 5th and 6th years studies reported on the economic minerals of surficial and cored sediments. Vibracores collected off the Maryland's shelf during previous studies were analyzed for mineral types and abundances, weight percent of general size fractions, and heavy mineral (HM) content. Mineralogic maturity indices were compiled to correlate the THM and economic heavy minerals (EHM) abundances with position offshore, sediment type, and the indices themselves. For the 7th year, the Maryland Geological Survey re-examined geophysical records and lithological data originally collected by the Army Corps of Engineers to locate and assess beach fill borrow areas for the Ocean City Beach Replenishment Project. Data from 163 vibracores and over 300 kilometers of high-resolution seismic profile records collected off Ocean City, Maryland, supported the strati graphic model developed by MGS during the first four years of the AASG-MMS program. The Maryland coastal bays became the focus of study during the 8th and 9th years during which seismic records, cores and surficial sediment were collected in Isle of Wight and Assawoman Bays. Shallow pretransgression surface was mapped, relating the existing streams to offshore paleochannels. The tenth year study focused on developing a repository for vibracores collected on Maryland's inner continental shelf.     

Geotechnical Aspects of Clayey Sediments Off Badagara on the Kerala Coast,India

Offshore geotechnical surveys form part of an integrated investigation to rejuvenate a decrepit minor port at Badagara, Kerala on the southwestern coast of India. The sediments typify a fluvio-marine milieu ranging from silty clay, sand, silty sand, sandy silt and clayey silt. Geotechnical and sedimentological studies of shallow cores reveal the geotechnical aspects besides the depositional history of the sediments. Downcore geotechnical variations and regressive coefficients based on their inter-relationships highlight diverse factorial inferences. X-Ray Diffraction data indicate the prominent clay type.

A comparative evaluation of the geotechnical characteristics of clayey sediments off Badagara, with similar studies along various sectors of the Kerala coast, both on land as well as in the near shore, is broadly attempted. Geotechnical studies carried out earlier on the uplifted Cochin marine clays provide comparative data for evaluating the possible variations between present day marine clayey sediments occurring along the Kerala coast and uplifted marine clays which, besides their gross variations in levels with respect to the present sea-level, also obviously relate to a much older depositional environment and provenance during probable Holocene times.     

Axial compressive bearing capacity of piles in ‎oil-contaminated sandy soil using FCV

ABSTRACT

Oil and its derivatives contaminate many soils and not only affect their chemical and biological properties but also their geotechnical properties. As oil contamination may deteriorate the functioning of piles, this paper addresses the effects of oil contamination on soil–pile interactions. Axial compressive bearing capacities of two close-ended, instrumented piles were investigated in different oil-contaminated sand using frustum confining vessel. Three different oils (gasoil, crude oil, and used motor oil) at different contamination levels were considered and using some strain gauges, the toe, shaft, and the net total bearing capacity of piles, as well as load distributions along the pile length, were derived. The results show that the presence of oil between soil particles has considerable adverse effects on bearing capacities of model piles, especially the shaft bearing capacity. The oil viscosity and percentage, as well as the contaminated sand bed thickness around the piles, are the most influential parameters. The higher the oil viscosity and oil content, the lower the values of the piles’ bearing capacities in comparison to the uncontaminated sand. With some modifications on the bearing capacity parameters of CFEM method, a good agreement was observed between measured and calculated bearing capacity values.     

Accurate GPS measurement of the location and orientation of a floating platform

Abstract

This article describes the design and initial tests of the GPS portion of a system for making seafloor geodesy measurements. In the planned system, GPS antennas on a floating platform will be used to measure the location of an acoustic transducer, attached below the platform, which interrogates an array of transponders on the seafloor. Since the GPS antennas are necessarily some distance above the transducer, a short‐baseline GPS interferometer consisting of three antennas is used to measure the platform's orientation.

A preliminary test of several crucial elements of the system was performed at the Scripps Institution of Oceanography (SIO) in December 1989. The test involved a fixed antenna on the pier and a second antenna floating on a buoy about 80 m away. GPS measurements of the vertical component of this baseline, analyzed independently by two groups using different software, agree with each other and with an independent measurement within a centimeter.

The first test of an integrated GPS/acoustic system took place in the Santa Cruz Basin off the coast of southern California in May 1990. In this test a much larger buoy, designed and built at SIO, was equipped with three GPS antennas and an acoustic transducer that interrogated a transponder on the ocean floor. Preliminary analysis indicates that the horizontal position of the transponder can be determined with a precision of about a centimeter. Further analysis will be required to investigate the magnitude of systematic errors.     

Late Devonian rifting in the central North Sea: Evidence from altered felsic volcanic rocks in the Embla oil field

In the Embla oil field on the northern flank of the Mid North Sea High, the central North Sea, multiple quartz porphyric volcanic beds at ca. 4600 m depth form part of a volcano-sedimentary interval above the Caledonian basement as interpreted from seismic data. Zircon U–Pb laser ablation ICPMS date one bed to 374 ± 3 Ma, indicating that the volcanic rocks and interbedded sediments are early Famennian and correlate to the Buchan Formation. The volcanic rocks have been extensively clay and carbonate altered in a near-surface environment, but high field strength element data show that the protoliths were alkali rhyolites, yielding intra-plate signatures in tectonic discrimination diagrams. Famennian quartz porphyric volcanic rocks have also been reported from well A17-1 on the southern flank of the Mid North Sea High. The Famennian volcanism on the northern and southern flanks testify to an active magmatic environment in the central North Sea in the early Famennian, supporting the existence of a late Devonian proto-Central Graben rift extending northwards into the central North Sea. The rift is likely an early example of strain localisation to a zone of reduced crustal strength along the Caledonian suture between Avalonia and Baltica.